Kyocera Ai2310 3010/2310 Instruction Handbook - Page 158
Troubleshooting
View all Kyocera Ai2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
TROUBLESHOOTING If trouble occurs, carry out the applicable checks and action given below. If the trouble persists, contact your service representative. Trouble Checks Action Nothing lights on the operation panel when main switch is turned ON. Is the power plug connected to an AC outlet? Connect the plug to an AC outlet. Page ----- No copies come out when the Start key is pressed. Has a message appeared in the message display? Read the message, and take action in accordance with it. 133 Copies come out blank. Are the originals set correctly? When originals are set on the platen, face them down and align them with original size scale. Set originals face up when 36 setting the original on the optional DF. Copies come out too light. Is the copier in the auto exposure mode? Perform "Auto exposure". 114 Is the copier in the manual exposure mode? Adjust the exposure to the correct degree using the copy exposure adjustment keys. 35 To adjust the overall exposure, change the initial value of the manual exposure in each original mode. 114, 115 Is add toner message displayed? Replace the toner cartridge. 139 Is paper wet? Replace the paper with new paper. 29 153