Kyocera Ai2310 3010/2310 Instruction Handbook - Page 159
Trouble, Checks, Action
View all Kyocera Ai2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Trouble Checks Action Copies come out too dark. Is the copier in the auto exposure mode? Perform "Auto exposure". Page 114 Is the copier in the manual exposure mode? Adjust the exposure to the correct degree using the copy exposure adjustment keys. 35 To adjust the overall exposure, change the initial value of the manual exposure in each original mode. 114, 115 Drawer cannot be closed. Was more than one drawer pulled open at one time? Pull open the drawer that is closed, and close it together with the drawer that could not be closed. ----- Copies are dirty. Is the platen or the original cover dirty? Clean the platen and/or the original cover. 165 Copy image is askew. Are the originals set correctly? When originals are set on the platen, align their edges with the correct original size scale for their size. When originals are set in the optional DF, 36 align the original insertion guide securely, and set the original. Paper keeps being misfed. Is the paper set correctly in the drawers? Set paper correctly. 29 Copied paper may curl badly and it may cause paper misfeeds depending on the type of paper and keeping state. 29 Remove the paper from drawer and turn it over and reset. Is paper curled, folded over or wrinkled? Replace the paper with new paper. 29 Is there any misfed paper or loose scraps of paper remaining inside the copier? Carry out the appropriate procedure to remove the paper. Black lines appear on the copy when using the optional DF. Is the slit glass dirty? Clean the slit glass. 141 165 154