Kyocera C8100DN Installation Guide

Installation Guide

Clearance

•

Temperature: 10 to 32.5 °C (50 to 90.5 °F)

However, the humidity should be 70 % or less

when the temperature is 32.5 °C (90.5 °F)

•

Humidity: 15 to 80 %RH

However, the temperature should be 30 °C (86 °F) or less when the

humidity is 80 %

•

Power Supply: 120 V AC, 60 Hz, 12.0 A / 220 to 240 V AC, 50/60 Hz, 7.2 A

Unpacking

Pull out the paper cassettes 1 and 2.

FS-C8100DN

Environment

CAUTION:

Be sure to provide enough space around the printer. Prolonged use without

sufficient clearance may cause heat to build up inside the printer, resulting in fire.

300 mm (11-13/16")

300 mm (11-13/16")

100 mm (3-15/16")

1000 mm (39-3/8")

Checking Shipped Components

Removing the Lift Plate

Stoppers

Shipped components

CD-ROMs

Manuals and Other

Printed

Matters

Printer

Power Cord

Toner Containers (4)

Waste Toner Box

Paper Size Sheets (4)

Lift Plate Stopper

Remove the lift plate stopper and

attach it to the storage location.

Installing the Toner Container and Waste Toner Box

Open the front cover.

Lightly tap the upper part of the toner

container 10 times or more.

Thoroughly shake the toner container

10 times or more.

Open the cap of the waste toner box

and install the waste toner box.

Turn the lock lever to the left.

Install the other toner containers in the

same way.

Install the toner container.

Close the front cover.

CAUTION:

When moving the printer, pull out the two carrying handles on the left side, and move with the carrying handles on the right

side by inserting hands in the two spaces provided to get a firm grasp. The printer must be carried by four persons or more.

3

1

2

1

4

3

2

6

7

8

1

2

Lock Lever

5

Push the front of the toner container

firmly, until you hear a click.

Remove the tapes, spacers, and desiccant.