Kyocera ECOSYS FS-1370DN FS-1370DN Operation Guide (Advanced)
Kyocera ECOSYS FS-1370DN Manual
View all Kyocera ECOSYS FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera ECOSYS FS-1370DN manual content summary:
- Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 1
FS-1370DN ADVANCED OPERATION GUIDE - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 2
- Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 3
Using the Menu Selection System 2-8 Report Print 2-11 USB Memory (USB flash memory selection 2-16 Counter (Viewing the counter value 2-18 Paper Settings 2-19 Print Settings 2-28 Network (Network settings 2-40 Device Common (Selecting/Setting the common device) .... 2-45 Security 2-57 Admin - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 4
ii - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 5
Windows Server, Windows XP and Windows This product was developed using the Guide This guide has the following chapters: 1 Paper Handling This chapter explains how choose, handle and load paper. 2 Using the Operation Panel This chapter explains how to use the operation panel to configure the printer - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 6
(black) during cleaning. CAUTION When pulling the paper, pull it gently so as not to tear it. Torn pieces of paper are difficult to remove and may be easily overlooked, deterring the paper jam recovery. WARNING If you ship the printer, remove and pack the developer unit and drum unit in a plastic - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 7
1 Paper Handling This chapter explains paper specifications for this printer. General Guidelines Selecting the Right Paper Paper Type 1-2 1-4 1-11 Paper Handling 1-1 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 8
paper jams and other problems, and the higher the level of quality your printed output will reflect. Differences between paper from different suppliers can also affect the machine's performance. A high-quality printer cannot produce highquality results when the wrong paper is used. Low-priced paper - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 9
Sizes The minimum and maximum paper sizes are as follows. For the paper smaller than JIS B6, postcards, and envelopes, the MP tray must be used. Paper cassette MP tray Minimum Paper Size Minimum Paper Size 356mm (14 inches) 148mm (5-13/16 inches) 356mm (14 inches) 148mm (5-13/16 inches) 105mm - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 10
should contain at least 80% pulp. Not more than 20% of the total paper content should consist of cotton or other fibers. Paper Sizes Cassettes and the MP Tray are available for the paper sizes shown below. The dimensional tolerances are ±0.7mm for the length and width. The angle at the corners must - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 11
feeding or print quality problems such as blurring because of poor toner fusing. The recommended basis weight is between 60 and 120g/m² (16 to 31.9 lib/ream) for the cassette and between 60 and 220g/m² (16 to 59 lib/ream) for the MP tray. Paper Weight Equivalence Table The paper weight is listed in - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 12
the density of paper fiber. Stiffness: Limp paper may buckle in the machine, resulting in paper jams. Curl: Most paper naturally tends to curl one way if left unpacked. When paper passes through the fixing unit, it curls upward a little. To produce flat printouts, load the paper so that the - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 13
be placed on the MP tray with the long edge towards the printer. Paper Handling When unloading transparencies (e.g., for clearing jams), hold them carefully by the edges to avoid leaving fingerprints on them. Labels Labels must be fed to the MP tray. One label can be loaded at a time. The basic - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 14
peel off, causing serious paper jam problems. Some label paper is manufactured with an extra loaded at a time. Fan the stack of postcards and align the edges before loading them in the MP tray. Make sure the postcards you are going to set are not curled. Feeding curled postcards may cause paper jams - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 15
can cause premature printer wear. • If jams occur, try setting less envelopes on the MP tray. • To avoid jams caused by curled envelopes, stack no more than 10 printed envelopes on the output tray. Thick Paper Fan the stack of paper and align the edges before loading them in the MP tray. Some types - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 16
Recycled Paper Select recycled paper that meets the same specifications as the white bond paper except for whiteness. Refer to Paper Specifications on page 1-2. Note Before purchasing recycled paper, test a sample on the machine and check that the printing quality is satisfactory. 1-10 Paper - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 17
for the paper source from the printer's operation panel will cause the printer to automatically select the paper source and print in the mode best suited to that type of paper. A different paper type setting can be made for each paper source including the MP tray. Not only can preset paper types be - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 18
1-12 Paper Handling - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 19
the Menu Selection System 2-8 Report Print 2-11 USB Memory (USB flash memory selection) 2-16 Counter (Viewing the counter value) 2-18 Paper Settings 2-19 Print Settings 2-28 Network (Network settings) 2-40 Device Common (Selecting/Setting the common device) 2-45 Security 2-57 Admin - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 20
various settings from a remote location, by using the control panel, the printer driver or other utilities such as the Status Monitor Utility. Other printer utilities can be installed using the CD-ROM supplied with the printer. The chapter describes the operation panel in detail, including its menus - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 21
Understanding the Operation Panel The operation panel on the top of the printer has a 2-line by 21-character liquid crystal display (LCD), eight keys, and three indicators (LED). Messages that appear on the display and functions of indicators - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 22
For details on Auto Sleep, refer to Sleep Timer (Sleep timer timeout time) on page 254. Jobs inside the printer are being canceled. To cancel a job, refer to Canceling a Printing Job on page 2-6. Error Codes Refer to the Troubleshooting section in the Operation Guide. 2-4 Using the Operation Panel - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 23
such as adding paper, cleaning the printer, preparing the toner container, formatting of CF card. On. Indicates when paper jam occurred, toner has run out, cover is open, and so on. If the message includes Press GO, press [GO] to resume printing. For details, refer to the Troubleshooting section in - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 24
job. • Stop the alarm sound. • Reset numeric values or cancel a setting procedure while using menu system. Canceling a Printing Job 1 While the printer displays Processing, press [Cancel]. Print Cancel? appears on the message display followed by the job name currently in progress. 2 Press U or V to - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 25
to move to the sub menu. The cursor key with the question mark ( ) may be pressed when the paper jam message has appeared on the message display. A help message will then appear to facilitate jam clearing in the location. When Use alternative? is shown in the message display, use the U and V key to - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 26
needs. Settings can be made when Ready, Please wait, Sleeping or Processing is on the printer message display. Note Settings that are received from application software and the printer driver will take priority over settings made in the operation panel. Entering the Mode Selection Menu Press - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 27
. Press Z to move to another sub-menu or Y to go back. Indicates that this is Indicates that there is the sub-menu another sub-menu >>Paper Weight Normal 1 >> is displayed before the second sub-menu. Indicates that this is the second sub-menu Setting a Menu Select the desired menu and press - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 28
each menu item in the mode selection menu. > 1 While the printer displays Ready, Please wait, Sleeping and Processing, press [MENU]. The or V, the selection changes. • Report Print • USB Memory • Counter • Paper Settings • Print Settings • Network • Device Common • Security • Admin • Adjust - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 29
Print > appears. >Print Menu Map ? Note that menus shown in the list may vary depending on which optional units installed in the printer. Print Menu Map The printer prints a full list of the menu selection system menu map. 1 Press Z while Report Print > is displayed. 2 >Print Menu Map appears - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 30
Menu Map Sample 2-12 Using the Operation Panel - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 31
Status Page You can check the printer's current status, including available memory Processing appears and the printer prints a status page. For a sample status page and its full description, refer to the printer's firmware version. Status Page Printer Firmware version 1 Paper Settings - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 32
the version and release date of the printer firmware. 2 Printer Settings Information This item shows various printer settings for hardware-related items: • MP tray paper size and type • Paper cassette size and type • Sleep time • Formfeed timeout time 3 Installed Options This item shows the option - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 33
print a list of the files on a CompactFlash (memory) card. IMPORTANT This message will be displayed when the CompactFlash (CF) card installed in the printer. 1 Press Z while Report Print > is displayed. 2 Press U or V repeatedly until >Print Mem. Card File List appears. 3 Press [OK]. A question mark - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 34
(Printing a file) • Copies (Number of copies) • Paper Source (Selecting the paper feed source) • Remove Device (Removing the USB flash memory) . Note that menus shown in the list may vary depending on which optional units installed in the printer. / /00:Folder 1 /00:Folder 1 /01:Folder 2 /.../01 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 35
U and V or Y and Z repeatedly until the paper source appears. (For example : Cassette 2) Note that menus shown in the list may vary depending on which optional units installed in the printer. 2 Press [OK]. The message Processing appears and the printer prints a file stored in a USB flash memory - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 36
Counter Counter (Viewing the counter value) This only displays the total number of pages printed. You cannot change the displayed number. 1 Press [MENU]. > 2 Press U or V repeatedly until Counter > appears. >Printed Pages 0002000 3 Press Z. >Printed Pages appears as he total number of pages - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 37
and type for the MP tray and cassettes from which paper is supplied. The options available in Paper Settings are as follows: • MP Tray Size (Setting MP tray paper size) • MP Tray Type (Setting the MP tray paper type) • Cassette (1 to 3) Size (Setting the cassette paper size) • Cassette (1 to 3) Type - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 38
feed from the MP tray, refer to Paper Specifications on page 1-2. Note Feeding the paper having a paper size which does not match the current paper size from the MP tray can cause paper jam. 1 Press Z while Paper Settings > is displayed. 2 Press U or V repeatedly until >MP Tray Size appears. 3 Press - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 39
the paper cassette, load the paper into a paper cassette, adjust the paper size, and select the paper size from the operation panel. If the PF-100 optional paper feeder is installed, use the same procedure to load paper into the paper feeder cassettes. 1 Pull the cassette out of the printer. Using - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 40
from the Operation Panel Use the operation panel to set the size of paper loaded in the cassette on the printer. 1 Press Z while Paper Settings > is displayed. 2 Press U or V repeatedly until >Cassette Size > appears. If optional paper feeders are added, Cassette1 Size will appear for the standard - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 41
to 356mm (5-13/16 to 14 inches) 105 to 216mm (4-1/8 to 8-1/2 inches) X Dimension >>X Dimension 216mm 1 When the unit of measurement is set, press V. >>X Dimension appears (the paper width setting). 2 Press [OK]. A blinking cursor (_) appears. 3 Press U or V to increase or decrease the value of - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 42
recycled, etc.) for the paper cassette, you can automatically select the paper in the paper cassette according to the paper type you command on the printer driver. The default setting is plain paper for all paper cassettes. If the PF-100 optional paper feeder is installed, use the same procedure to - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 43
type) The following describes the procedure used to set a user-defined paper type for the printer. Eight custom user settings may be registered. After having been set, any of these may be called up when setting the paper type for a paper source. The paper weight and duplex path can be set (refer to - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 44
Press [OK]. 6 Press [MENU]. The display returns to Ready. Duplex Path (Setting the duplex path) 1 Display the custom paper type (refer to Type Adjust (Creating custom paper type) on page 2-25) and press Z. 2 Press U or V repeatedly until >>Duplex Path appears. 3 Press [OK]. A blinking question mark - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 45
4 Press [OK] again. All customized paper types will be reset to the default. The display returns to Ready. Using the Operation Panel 2-27 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 46
source. The message display toggles through the following paper feed sources, depending on the installed optional paper feeders (from the top most paper cassette to the bottom paper cassette): MP tray Cassette 1 Cassette 2 Cassette 3 Cassettes 2 and 3 are available for selection when the optional - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 47
paper source. 1 While Load Cassette 1 is displayed, press U or V repeatedly until Use alternative? appears. 2 Press U or V repeatedly until the desired paper source and size appears. Each time you press U or V, another paper cassette or the paper size that can currently be fed from the MP tray - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 48
both sides of the paper. The duplexer is mounted underneath the printer. Duplex printing is available for the following paper types: PLAIN PREPRINTED MP tray. If the paper to be fed from the MP tray does not match the paper size and paper type of the current paper feed source cassette, a paper jam - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 49
A4/LT is turned On using the operation panel, the printer ignores the difference between A4 and Letter paper sizes. Printing is performed without an error message even if the actual paper size in the current cassette differs from the paper size formatting the job. By default, this feature is On - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 50
PCL 6 >Emulation ? KPDL (AUTO) >>Error Report ? On Alternative Emulation for KPDL Emulation KPDL is Kyocera's implementation of the PostScript language. The KPDL (AUTO) emulation enables the printer to automatically change the emulation mode according to the data received when printing. In addition - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 51
shown above. You can perform this operation only when optional fonts are installed in the printer. The letter before the number indicates the location of the font, as shown below. I: Internal font S: Soft (downloaded) font M: Fonts in optional CompactFlash card H: Fonts in RAM disk 4 Press [OK - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 52
>>Courier ? Regular 5 Press [OK]. A blinking question mark (?) appears. >Font Select Internal 6 Select Regular or Dark using U or V. 7 Press [OK]. 8 Press [MENU]. The display returns to Ready. Changing the Default Font Size You can change the size of the default font. If you selected a - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 53
Settings > is displayed. > 2 Press U or V repeatedly until >Print Quality > appears. KIR Mode (Selecting the KIR mode) This printer incorporates the KIR (Kyocera Image Refinement) smoothing function. KIR users the software to enhance resolution, resulting in high quality printing at resolution of - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 54
mode) By enabling EcoPrint mode, you can minimize the amount of toner used during printing. Because images printed in this mode may be slightly than those printed in standard resolution, you should use EcoPrint for test prints or other situations where high-quality prints are not required. - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 55
>Page Set >>Copies Page Set (Setting pagination) In Page Set menus, you can set the number of copies, page orientation, and other settings regarding pagination. The options available in Page Set are as follows: • Copies (Number of copies) • Orientation (Print orientation) • LF Action (Linefeed) • - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 56
. 5 When the desired action is displayed, press [OK]. 6 Press [MENU]. The display returns to Ready. CR Action (Carriage-Return) This procedure instructs the printer what to do when it receives a carriage return code (0DH). • CR only: A carriage-return is performed (Default). • CR and LF: A linefeed - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 57
) If you select On in this setting, XPS data is scaled to fit the paper size during printing. If you select Off, the data is printed at its original setting for TIFF files) Sets the print mode for TIFF files. The default setting is Paper Size. 1 Press Z while >Page Set > is displayed. 2 Press U or - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 58
Network >TCP/IP ? Off 2-40 Network (Network settings) This printer supports TCP/IP and TCP/IP (IPv6) protocols. IP is an abbreviation for Internet Protocol. This printer routinely uses the TCP/IP (IPv4) protocol, but provides a separate setting for the nextgeneration IP, IPv6. TCP/IP (IPv4) uses 32 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 59
>>DHCP ? Off 4 Select On or Off using U or V. 5 Select On and press [OK]. The display changes to the settings shown below. DHCP (DHCP setting) DHCP (Dynamic Host Configuration Protocol) is the protocol that assigns the information required to establish a network connection when a host attempts to - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 60
example, a "Gateway" device is required to connect a different closed network (using its own protocols) to the open Internet (using TCP/IP). By installing a gateway, the communications protocols and data display modes on different networks can be made compatible. On TCP/IP networks, the term gateway - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 61
settings and ensure that Bonjour is registered on the exceptions list and that Bonjour packets are accepted. If you install Bonjour on Windows XP Service Pack 2 or later, the Windows firewall will be set up correctly for Bonjour. 1 Press Z while >TCP/IP On > is displayed. 2 Press U or V repeatedly - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 62
MENU]. The display returns to Ready. DHCPv6 (DHCPv6 setting) DHCPv6 is the next-generation of the Internet's Dynamic Host Configuration Protocol and supports IPv6. It extends the BOOTP startup protocol that defines the protocols used for transferring configuration information to hosts on the network - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 63
/Setting the common device) Selects/sets all the functions in this printer. The options available in Device Common are as follows: • MSG the procedure given below. You can optionally download messages in other languages. Contact your service representative for information. 1 Press Z while Device - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 64
>Buzzer Buzzer (Alarm (Buzzer) setting) This function uses tones to notify the user of printer operations and the printer status. This setting is useful, for example, when the printer is located some distance from the user. The options available in Buzzer are as follows: • Key Confirm. (Key - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 65
]. The display returns to Ready. Error (Error tone setting) When On is selected in this setting, a tone sounds when a problem such as running out of paper or a paper jam occurs during printing. The default setting is On. 1 Press Z while >Buzzer > is displayed. 2 Press U or V repeatedly until >>Error - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 66
to perform the following operations on the RAM disk. Note The printer also supports CF card as a storage device. The CF card is installed into the dedicated slot of the printer. The RAM disk is an allocated part of the printer's memory. IMPORTANT The RAM disk stores data only temporarily. When the - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 67
of the CF card, refer to CompactFlash (CF) Card on page 3-6. IMPORTANT The Memory Card menu options are only displayed when a CF card is installed in the printer. 1 Press Z while Device Common > is displayed. > 2 Press U or V repeatedly until >Memory Card > appears. Using the Operation Panel 2-49 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 68
card is installed in the printer and protection is disabled. Note Format is only displayed when a CF card is installed in the printer and setting) • Paper Mismatch (Detection settings for paper size/type errors when the paper source is fixed) • MP Tray Empty (Warning when the MP tray is empty) - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 69
V. 5 Press [OK]. 6 Press [MENU]. The display returns to Ready. MP Tray Empty (Warning when the MP tray is empty) Turn this setting to On if you want the error displayed when the MP tray is configured as the default paper source, and there is no paper in the MP tray, or turn it to Off not to have the - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 70
6 Press [MENU]. The display returns to Ready. 2-52 Using the Operation Panel - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 71
is displayed. > 2 Press U or V repeatedly until >Timer > appears. >>Form Feed Time Out 030sec. Form Feed Time Out (Automatic form feed timeout setting) If the printer receives no data for a certain period, it will time out and release the current interface. It prints whatever data it has in its - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 72
is operated, or one of the exterior covers is opened. The default time is 15 minutes. Note Calibration is automatically executed before the printer reverts to normal operation mode. 1 Press Z while >Timer > is displayed. 2 Press U or V repeatedly until >>Sleep Timer appears. 3 To change the timeout - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 73
to continue printing occurs, the next received data is automatically printed after a set period of time elapses. For example, if the printer is shared over a network as a network printer and one person causes one of the above errors, after the set period of time elapses, the data sent from the next - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 74
[OK]. 6 Press [MENU]. The display returns to Ready. >>Auto Sleep ? On Auto Sleep (Setting the sleep timer) The printer has a sleep timer that is used to conserve power when the printer is not printing, processing, or receiving data. The default setting is On. 1 Press Z while >Timer > is displayed - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 75
Security ID _ Security The security functions can be set up to protect printer operation and the print data. The options available in Security are as follows: • ID (Administrator ID input) • Password (Administrator password input) • I/F Block (Interface (external device) - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 76
Password _ >I/F Block >>USB Host ? Unblock Password (Administrator Password input) To set up the Security functions, you must enter an administrator ID and administrator password. For information on how to set the administrator password, refer to Admin (Administrator settings) on page 2-65. 1 When - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 77
>>USB Device ? Unblock USB Device (USB interface setting) This locks and protects the USB interface. The default setting is Unblock. 1 Press Z while >I/F Block > is displayed. >>USB Device appears. 2 Press [OK]. A blinking question mark (?) appears. 3 Select Block or Unblock using U or V. 4 Press [ - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 78
Windows, etc.). The basic network layer protocol used is NetWare's own IPX (Internetwork Packet eXchange)/SPX (Sequenced Packet eXchange), but the system also supports drivers and protocol stacks are in the form of modules called NetWare Loadable Modules (NLMs), and the ability of NLMs to load and - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 79
protocol used primarily on Macintosh computers and also refers to the Mac OS network functions. AppleTalk assigns 24-bit network addresses (a 16 enables printing to be carried out via routers on printers in remote locations. It also supports the HTTP authentication mechanisms along with SSL server - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 80
>SSL Server >SSL Server ? Off >>DES ? Off SSL Server (SSL Server setting) SSL (Secure Sockets Layer) refers to a protocol used to encrypt information sent and received over a network. SSL can currently be used to encrypt data such as the WWW or FTP files widely used on the Internet so that privacy - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 81
to Ready. AES (SSL Server AES setting) AES (Advanced Encryption Standard) was developed to replace DES as the standard encryption as the safety of DES has declined. network printing. To use IPP over SSL, both server and client must support the protocol. The default setting is Off. 1 Press Z while > - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 82
or Off using U or V. 4 Press [OK]. 5 Press [Menu]. The display returns to Ready. Security Level (Security level setting) Security Level is primarily a menu used by service representative for maintenance work. There is no need for customers to use this menu. 2-64 Using the Operation Panel - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 83
input). Password (Administrator Password input) You can use this to set the administrator password. The default setting is the numeric part of your printer's model name. The default setting is "3500". 1 When you entered the ID in the previous step (ID (Administrator ID input)), the message display - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 84
>Change ID 001 >Change ID _ OK? 002 >Change Password Change Password _ OK? 010 2-66 Each time you press U or V, the following settings to be changed appear in succession. • Change ID • Change Password Note If a change is required, refer to the procedures in Change ID (Administrator ID change) and - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 85
values. Downloaded fonts and macros are deleted from the printer's memory. 1 Press Z while Adjust/Maintenance > is displayed. 2 Press U or V repeatedly until >Restart Printer appears. 3 Press [OK]. A question mark (?) appears. 4 Press [OK] again. Self test appears while the printer is resetting - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 86
• Print Test Page • Developer (Initializing the developer unit) IMPORTANT Service is primarily a menu used by service representative for maintenance Test Page The test page is printed to check the effectiveness of printer adjustments. This is primarily used for maintenance by service representative - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 87
display returns to Ready. Developer (Initializing the developer unit) The replaced developer can be automatically fill up the toner using this menu when a toner container is installed and the printer is turned on. This is primarily used for maintenance by service representative. Using the Operation - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 88
2-70 Using the Operation Panel - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 89
3 Option This chapter explains the options for this printer. General Information 3-2 Expansion Memory Modules 3-3 Paper Feeder (PF-100) 3-5 CompactFlash (CF) Card 3-6 USB Flash Memory 3-6 Option 3-1 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 90
General Information The printers have the following options available to satisfy your printing requirements. Note Install the memory module before installing the optional paper feeder (PF-100). For instructions on installing individual options, refer to the documentation included with the option. - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 91
size is 1152 MB. Note The expansion memory should only be installed by your service technician. We shall not be liable for any damages caused by improper installation of expansion memory. Precautions for Handling the Printer's Main Controller Board and Memory Module To protect electronic parts - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 92
case of the first installation. Then, remove secure. CAUTION Before inserting a memory module in the printer, make sure that the printer is switched off. 6 Push down the memory remove the right cover and the memory slot cover from the printer. Then, carefully push out the two socket clamps. Ease the - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 93
PF-100 allows you to add two more paper cassette to the bottom of the printer for continuous feeding of a large volume of paper. Each paper cassette can hold up to approximately 250 sheets of ISO A4, ISO A5, JIS B5, Letter, or Legal size (80g/m2) paper. This feeder is attached at the bottom - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 94
cover. 4 Insert the CF Card. 5 Secure the optional interface slot cover with the screws removed in step 3. 6 Connect the power cord and printer cable and turn on the printer. USB Flash Memory See your dealer for purchasing information of this optional device that are best suited for use with this - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 95
4 Computer Interface This chapter contains explanations on the following topics: General Information 4-2 USB Interface 4-2 Network Interface 4-3 Computer Interface 4-1 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 96
. USB Interface This printer supports the Hi-Speed USB Printer: B-type receptacle (female) with upstream port Cable: B-type plug (male) Cable Use a shielded cable that complies with USB 2.0 (Hi-Speed USB) and not longer than 5 meters (16 feet). Transfer Mode High speed (480 Mbps maximum) Full - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 97
SMTP, POP3, SSL, SNMP, IPv6 and NetBIOS over TCP/IP protocols are supported for easier printer management and more robust security. Support for IEEE 802.1x The interface supports EAP-TLS and PEAP authentication. Supports IPv6 Supports IPv6, which is based on IPv4 with improvements, such as increased - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 98
EMI Countermeasures VCCI Class B, FCC Class B (U.S.), CE (Europe) IMPORTANT When IPv6 functions are used, the devices used on the network (routers, PCs, etc) must support IPv6. 4-4 Computer Interface - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 99
service technician. AppleTalk AppleTalk offers file sharing and printer load printers. dpi (dots per inch) This indicates the number of dots printed per inch (25.4 mm) as a unit for expressing resolution. EcoPrint This is a printing mode that reduces toner exceeded, the printer will automatically - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 100
dots, e.g. 192.168.110.171. Each number should be a decimal between 0 and 255. KPDL KPDL is Kyocera's implementation of the PostScript page description language Level3. MP Tray This tray is used instead of the cassette when printing on envelopes, postcards, transparency sheets, and labels. NetBEUI - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 101
computers and other devices communicate with each other over a network. USB (Universal Serial Bus) An interface standard for low to middle speed serial interfaces. This printer supports Hi-Speed USB. The maximum transfer rate is 480 Mbps and the maximum cable length is 5 meters (16 feet). 5-3 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 102
5-4 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 103
Detection Duplex printing 2-51 MP Tray Empty 2-51 Paper mismatch 2-51 Setting 2-50 Expansion memory module option 3-2 F Features Network interface 4-3 Font select Selecting default font 2-33 H HTTPS setting SSL server 2-64 I Installing CF card 3-6 Installing memory module 3-3 Interface - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 104
Menu 2-8 MP tray basis weight 1-5 minimum and maximum paper sizes 1-3 Paper size 1-4, 2-20 Paper type 1-11 paper type 2-26 Restart Printer 2-67 S Security level 2-64 Selecting paper feed source USB flash memory 2-17 Selecting regular or dark 2-33 Service (for maintenance 2-68 Special paper - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 105
Sleep 2-54 Transparency 1-7 U Unit of measurement 2-23 Selecting 2-23 USB Interface 4-2 USB interface Interface block 2-59 USB Memory 2-16 USB memory slot Interface block 2-58 V Verifying expanded memory 3-4 Viewing counter value 2-18 Index-3 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 106
Index-4 - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 107
- Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 108
- Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 109
2010 is a trademark of Kyocera Corporation - Kyocera ECOSYS FS-1370DN | FS-1370DN Operation Guide (Advanced) - Page 110
First edition 2010.2
ADVANCED OPERATION GUIDE
FS-1370DN