Kyocera ECOSYS FS-1370DN FS-1370DN Printer Driver User Guide Rev-12.8
Kyocera ECOSYS FS-1370DN Manual
View all Kyocera ECOSYS FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera ECOSYS FS-1370DN manual content summary:
- Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 1
- Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 2
the same operations are used for Microsoft Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008 and Windows 2000 environments. User Interface screen captures shown in this guide may differ depending on your printing device. Model supported by the KX printer driver FS-1370DN Copyright - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 3
Printer Components ...1-9 Installing Optional Printer Components 1-9 The Add Printer Wizard ...1-10 Installing a Printer Driver in Windows 7 and Windows Vista 1-10 Installing a Printer Driver in Windows XP and Windows 2000 1-10 Printer Driver Settings Access ...1-11 Changing the Default Driver - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 4
Pages per Paper Settings ...4-1 Source and Media Types ...4-2 Print Size and Page Size ...4-2 Creating a Custom Page Size 4-3 Printing with Custom Size Pages 4-3 Duplex Printing ...4-3 Printing in Duplex Mode ...4-4 Collate ...4-4 Printing Collated Documents 4-5 EcoPrint ...4-5 Kyocera User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 5
Page Insert ...7-5 Printing Page Inserts ...7-5 Page Insertion Options ...7-6 Transparency Interleaving ...7-6 Interleaving Transparencies ...7-7 Chapter 8 Advanced a Profile ...9-2 Deleting a Profile ...9-2 Importing a Profile ...9-2 Exporting a Profile ...9-3 Glossary ...iv KX DRIVER iii - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 6
In Windows operating systems, you must be logged in with administrator rights to install the printer driver. If you connect a USB (Universal Serial Bus) cable before printer driver installation, it is strongly recommended that you cancel the Found New Hardware Wizard and install the software through - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 7
In Custom Mode, you are able to select the installation packages and specify the port. Installing in Express Mode This section describes the express installation procedure of the driver software in Windows operating systems. 1 Ensure that your printer and computer are turned on and connected by USB - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 8
will be made from the Microsoft Windows Update site if a certified driver is available and the system is connected to the web. We recommend you continue with the steps to install the KX Driver for an expanded feature set. 2 On the Installation Method page, click Express Mode. 3 The Discover Printing - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 9
, fonts, and the utilities you want to install. Printer drivers that ship with Windows operating systems are called minidrivers. The minidriver is available separately for PCL and KPDL and provides basic support for your printer. The KX XPS DRIVER and XPS minidriver is only available for printing - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 10
the custom installation procedure of the driver software in Windows operating systems using a USB connection. With Discover, all devices available for the driver installation are found automatically. This is the recommended Custom Mode USB installation method. 1 Ensure that your printer and computer - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 11
Custom Installation page, select the driver and software packages you want to install from the Driver and Utility tabs, and clear those not intended for installation. Click Next. If you only select software packages from the Utility tab, you will skip to the Confirm Settings page. 5 On the Printer - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 12
Custom Select This section describes the custom installation procedure of the driver software in Windows operating systems using a network connection. 1 Ensure that your printer and computer are connected to a network. 2 On the Installation Method page, select Custom Mode. 3 The Discover Printing - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 13
Connection using Custom Select This section describes the custom installation procedure of the driver software in Windows operating systems using a USB connection. With the Custom select option, you manually select the printing system and printer port to install. In Custom mode, Custom Select is not - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 14
Optional Printer Components 1 On the Product Library CD menu, select Advanced Tools. 2 On the Advanced Tools page, select Optional Printer Components. 3 Select a printer, and click Next to install optional components. 4 On all Select pages, choose your components, and click Next. 1-9 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 15
driver installation instructions. Click either Add a local printer or Add a network, wireless or Bluetooth printer. Follow the instructions on each page, then click Next to proceed to the next page. Note: If the Windows Security warning dialog box appears, click Install this driver software anyway - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 16
4 When the Completing the Add Printer Wizard page appears, installation of the printer driver is now complete. To close the Add Printer Wizard, click Finish. If prompted, restart your computer. Printer Driver Settings Access The printer driver software can be accessed from the Print dialog - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 17
memory installed in your printing system, which lets the driver manage font downloads more efficiently. Administrator, User, PDL (Page Description Language), and Compatibility settings can also be selected. Accessing Device Settings Device Settings can be accessed from Devices and Printers (Windows - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 18
keep the printer driver consistent with the printing system configuration. Not all installed devices are detected by using Auto Configure. Before selecting OK in the Device Settings tab, check the settings to make sure that they are correct. Note: The default setting for Windows XP Service Pack 2 is - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 19
To maximize the downloading of printing system fonts, the driver must be set to match the total printing system memory. Setting the Memory By default, the Memory setting matches the standard memory in the printing system. If optional memory is installed, set the memory in the printer driver to match - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 20
Quick Print tab to the user. Selecting Set Quick Print tab as default opens to this tab when you access Printing Preferences. Lock Security Settings If the Security Watermark plug-in is installed, Lock Security Settings appears in the Administrator Settings dialog box. The administrator can ensure - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 21
be set in the printer driver and in the printing user name and password. Authentication and privacy options are available by selecting Settings. Apply to other models This option displays a list of installed protection against Gateway Load Balancing Protocol (GLBP)-spoofing software. SHA1 This option - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 22
box. 6 Optional: Under Apply to other models, you can click Select and choose from available models. The SNMP settings are applied to all selected models. User Settings User Settings lets you specify user and department names, select the default unit of measure, and change the driver display - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 23
the Output to PDF plug-in. The printer default is PCL XL, which is suitable for most printing purposes. If your application supports the XML Print Specification, then XPS printing can be performed after installing the XPS driver. With the XPS driver, the only available PDL is XPS. After you select - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 24
PCL 5e Enables native TrueType font downloading Supports most Graphics settings options PDF Output to PDF is a plug-in that lets you print or save documents from multiple sources to Adobe Portable Document Format (PDF). The PDF format is independent of the operating system and application software - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 25
Windows, Mac OS®, and UNIX® platforms. For a document using mixed paper sizes, all pages in the PDF use the size of the first page. Note: With PDF selected in the PDL Settings dialog box, only a limited set of driver options are available. PDF Options You can select PDF options if you have installed - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 26
PDF. Printing and Saving to PDF You can print a document and save it to Adobe PDF, if you have installed the Output to PDF plug-in. 1 In Device Settings > PDL Settings, in the Select PDL list select PDF. 2 Click Settings. 3 In the PDF Settings dialog box, select Print and save. 2-10 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 27
format, XPS requires compatible printer hardware and software written for the Windows Presentation Foundation (WPF) architecture. PCL and KPDL are not compatible with an XPS environment. Therefore, an XPS driver supports a single PDL setting. The XPS driver can be installed from the Product Library - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 28
the options in Compatibility Settings to the default by clicking Reset. Ignore Application Collation This option bypasses the Collate setting in software applications, and gives priority to the printer driver setting. With the check box selected, the printer driver Collate setting is used. With the - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 29
3 Click OK in all dialog boxes. Device Settings KX DRIVER 2-13 - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 30
support common printing tasks. The Administrator can set the view of the Quick Print tab through the Installation . Click on the Quick Print icons and check boxes to change settings for the print job. Some of to change the orientation of the printed page by 180 degrees. EcoPrint This icon changes - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 31
bound at the top. Multiple Pages per Sheet Multiple pages per sheet prints several pages on a single sheet of paper for the purpose of reviewing the document and conserving paper. The size and readability of the multiple pages decrease as the number of pages per sheet is increased. You can set - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 32
Note: To reset the printer driver to default settings, select the Factory Default profile, and click Apply. This clears the settings of a selected profile. Editing a Profile The Edit button lets you make changes to an existing profile. The Factory Default profile cannot be edited. 3-3 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 33
KX DRIVER Quick Print 1 In any tab, click Profiles. 2 In the Select profile or click OK to close the dialog box. Exporting a Profile The Export button lets you export a copy of a profile from your printer driver for use in other printer drivers. The Factory Default profile cannot be exported. 1 In - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 34
Quick Print 3 The Export Profile dialog box appears. Name and save the profile. 4 Click OK to close the Profiles dialog box. 3-5 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 35
can specify the most commonly used printer driver settings. Basic Paper Settings The Basic tab contains several settings for the most commonly used printing tasks. Print size This setting sets the size of the area that the printer prints to, regardless of the actual paper size that is used by the - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 36
, labels, and envelopes must be supplied from the MP tray. Ensure the paper is properly loaded by following the instructions outlined in the printing system's Operation Guide. Note: Source and Media type are separate items in the dialog box, but can be combined using the Combine source and - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 37
reducing the sizes of prints. To delete a custom page size from the Page Sizes dialog box, select the name of the custom page size and click Delete. Printing with Custom Size Pages You can print on custom-sized pages. 1 Load custom-sized paper into the MP tray. 2 In the Basic tab, select the name of - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 38
computer to the printing system. With Collate selected, the driver prints the complete job set by set. With Collate cleared, it prints each page by set. For example, with Collate selected, three copies of a five-page document outputs as pages one through five in succession, three times. User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 39
information, click Legal Notices. Click OK to close the driver information dialog boxes. Displaying Plug-in Information A plug-in integrates with the printer driver to extend the driver's capabilities. In Device Settings or any tab, click Kyocera logo > Plug-in to view the following plug-in - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 40
Basic Click OK to close the driver information dialog boxes. 4-6 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 41
printed pages without affecting the original document. Booklet KX DRIVER Booklet prints a two-page layout on both sides of each sheet of paper. You booklet. When Booklet is selected, Multiple pages per sheet, Poster and Scaling are unavailable. A different paper source can be selected for the - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 42
number of sheets to be printed and the maximum poster size. Note: The Sheets per page displays the unit of measurement in inches or millimeters. You can change the Units setting in the User Settings dialog box, accessed from Device Settings. Use Poster Settings to select options, in any combination - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 43
KX DRIVER Layout check box sheet, along with the poster, to guide you in assembling the printed poster sheets. Poster pages This selection prints all of the sheets In Sheets per page, select the poster size. Each option describes the number of sheets it takes to represent one finished poster page. 3 - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 44
text appears slightly reduced and away from the edge of the page. If text does not extend beyond the page when the gutter increases, clear Reduce image to fit. 4 Click OK to save gutter settings, then click OK again to return to the Print dialog box. 5 Click OK to start printing. 5-4 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 45
a measurement, in dots per linear inch (dpi), depends on the number of resolutions supported by the printing system. High PCL 5e is selected in the PDL Settings dialog box. Custom Custom lets you choose a setting for Custom Quality and EcoPrint. Selecting Custom without EcoPrint results in a default - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 46
for fonts on Microsoft Windows. System fonts are the primary fonts used by the operating system. They are typically accessed through an application interface or through a common font dialog box. Device fonts are stored either permanently or temporarily in the printing system memory. 6-2 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 47
KX DRIVER Imaging Font Settings The Font Settings dialog box lets you specify how TrueType fonts are sent to the printing system. The chosen method affects the speed and quality of the print job: Download to printing systems that are not well supported by a large font inventory. Setting Font - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 48
box, the System fonts list shows the fonts installed visible in the application font lists as printer icons next to the font name, unless specific PDL is selected. Selecting Graphics Settings 1 In the Imaging tab, click Graphics to open the Graphics Settings dialog box. 2 In the dialog box User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 49
KX DRIVER Imaging In the Imaging tab, click Graphics to open the Graphics settings dialog box and access the Pattern scaling settings. Auto (default dots. Coarse is the same as Auto when PCL XL or PCL 5e is selected in the PDL Settings dialog box. Medium This setting prints patterns and fills with - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 50
default screens check box. 3 Set the available options to the desired values: Ink Lists the halftone screens available. For black and white printers, this option appears unavailable and is permanently set to Black. Frequency Displays the number of rows of dots per a different angle. User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 51
dialog box. 6 Adjustment Settings dialog box illustrates any brightness box at the right. The brightest setting is +100; the darkest is -100. Zero is the default box at the right. The highest contrast setting is +100; the lowest is -100. Zero is the default the printer. In black and white printers, - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 52
and back, or the Print onto options to specify what type of covers to print. 2 Select the Media for cover to specify what type of paper or other media to use for the covers. 3 Click OK to return to the Print dialog box. 7-1 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 53
Mode Options Check Box Selection Front Publishing Cover Insertion Type Inserts a blank front cover. Front Front outside Prints on the outside surface of the front cover. Front Front inside Prints on the inside surface of the front cover. Front Front outside Front inside KX DRIVER Prints on - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 54
Publishing Check Box Selection Front and back Cover Insertion Type Inserts blank front and back covers. Front and back Front outside Prints on the cover. Front and back Front outside Front inside 7-3 Prints on both sides of the front cover and inserts a blank back cover. - continued User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 55
Check Box Selection Front and back Back inside Publishing Cover Insertion Type Prints on the inside surface of the back cover and inserts a blank front inside Back outside Prints on both sides of the front and back covers. Choosing Cover Media You can select media for the cover. KX DRIVER 7-4 - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 56
number to insert. A page will be inserted between the page number you typed and the page before it. 4 From the Media for page list, select the media type of the inserted page or the source paper cassette. 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. 7-5 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 57
on both sides of the inserted page. Transparency Interleaving Transparency interleaving inserts a backing sheet between printed transparencies. The backing sheet, also known as an interleaf, helps keep transparencies clean and prevents them from clinging together. This feature is KX DRIVER 7-6 - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 58
that media is loaded is automatically selected. 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. The printing system's operation panel prompts you to load transparencies into the MP tray, and, if necessary, load backing paper into the selected cassette. 7-7 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 59
printer resident PRESCRIBE language. The Product Library CD includes a PRESCRIBE command language reference guide. A command file is a set of instructions . To create this file, use a text editor like Windows Notepad. In Advanced > Prologue/Epilogue , select a Prologue/Epilogue file to KX DRIVER 8-1 - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 60
to use some but not others. 1 In Advanced > Prologue/Epilogue, select a Prologue/Epilogue page and End of the page insertion point options are available only if PCL 5e is selected in the PDL Settings dialog box. With a command file selected in the list, choose one insertion point option: User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 61
be edited, though a limited number of options can be changed for default watermarks. 1 In the Advanced tab, click Watermark. 2 In the Watermark dialog box, click Add to create a user defined watermark; or under Select watermark, select a default or custom watermark and click Edit. KX DRIVER 8-3 - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 62
Advanced 3 Under Watermark name, type a name, up to 39 characters. A default watermark cannot be renamed. 4 Under Watermark text, type your preferred text. This option is not available when editing a default [default] This option places the watermark text at the default angle on the page. User - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 63
on the printer's operation panel. The Optional Printer Components wizard offers the opportunity to install the Security Watermark plug-in following installation of the printer driver. Security Watermark appears in the Advanced tab after selecting Device Settings > PDL > Select PDL > PCL XL. The - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 64
an error message appears on the printing system's operation panel. 8 Select Overprint for applications such as Microsoft PowerPoint and Internet Explorer where the document content fills the entire page. The security watermark is printed over the document data so that it can appear in a User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 65
when changing the background pattern, replacing the toner or printing system, and after heavy printing activity. 1 In Advanced > Security Watermark, click Add to create a user defined security watermark; or under Select security watermark, select a default or custom security watermark and click Edit - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 66
for each supported printing system. More than one status monitor can be displayed at one time. 1 In the Advanced tab, click Status Monitor. 2 If you want the Status Monitor image to appear during a print job, in the Status Monitor dialog box, select the Status Monitor check box. 8-8 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 67
box. You can also change the appearance of the Status Monitor image. 1 Right-click the Status Monitor icon in the system tray. 2 Click Preferences. 3 Click the Sound Notification tab. 4 Click the Enables Event Notification check box. 5 Select an event for a Status Monitor alert. Cover open Paper jam - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 68
Windows operating system. When a print job is sent from an application, it is transferred to the spool file. The application writes to and the printer driver reads from the spool file simultaneously. For multiple or large documents, this quickly returns application control to the user while - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 69
print with EMF spooling: 1 From the Advanced tab, select the EMF Spooling check box. 2 Click OK and continue the printing process . In the Advanced tab, clear the Enable client profile check box to select profiles from the server to apply to print jobs created by the driver. Server profiles are - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 70
Profiles dialog box. 5 Click Apply to use the selected profile for the current print job, or click OK to close the dialog box. Note: To reset the printer driver to default settings, select the Factory Default profile, and click Apply. This clears the settings of a selected profile. 9-1 User Guide - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 71
an existing profile. The Factory Default profile cannot be edited. box. Deleting a Profile The Delete button lets you remove an existing profile. The Factory Default box. Importing a Profile The Import button lets you import a copy of a profile from other printer drivers into your printer driver - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 72
copy of a profile from your printer driver for use in other printer drivers. The Factory Default profile cannot be exported. 1 In any tab, click Profiles. 2 In the Select profile section, select the profile to be exported, and click Export. 3 The Export Profile dialog box appears. Name and save the - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 73
, and RAM disk. Driver settings will be updated with information received from the physical printing system. Installed devices will be displayed in the Preview image. B Booklet Layout feature that prints a multi-page document in a booklet format by using a duplex unit. Two pages are printed on - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 74
MP tray Source tray used for labels, transparencies, envelopes, and custom printing media. Multiple pages per sheet This feature lets you print several pages on a single sheet of paper for the purpose of reviewing the document and conserving paper. O Optional Printer Components Optional Printer - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 75
prevents them from clinging together. W Watermark The Watermark feature is available in the Advanced tab. A watermark is a recognizable image or pattern that can be placed on a page or throughout a document. You can choose one of the standard watermarks or create your own text. KX DRIVER vi - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 76
75038-5299 Telephone: (972) 550-8987 Fax: (972) 252-9786 National Operation Center & National Training Center: 2825 West Story Road Irving, Texas 75038-5299 7766 Telephone: (305) 421-6640 Fax: (305) 421-6666 KYOCERA MITA CANADA, LTD. 6120 Kestrel Road, Mississauga, Ontario L5T 1S8, Canada Telephone: ( - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 77
The Netherlands Telephone: +31.20.654.0000 Home page: http://www.kyoceramita-europe.com Email: [email protected] Kyocera Mita Nederland B.V. Beechavenue 25, 1119RA Schiphol-Rijk The Netherlands Telephone: +31.20.58.77.200 Kyocera Mita (UK) LTD 8 Beacontree Plaza Gillette Way Reading - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 78
3, 6-10 Talavera Road, North Ryde, N.S.W. 2113 Australia Telephone: (02) 9888.9999 Kyocera Mita New Zealand LTD. 1-3 Parkhead Place, Albany P.O. BOX 302 125 NHPC Auckland, New Zealand Telephone: (09) 415.4517 Kyocera Mita (Thailand) Corp., LTD. 9/209 Ratchada-Prachachem Road Bang Sue, Bangkok 10800 - Kyocera ECOSYS FS-1370DN | FS-1370DN Printer Driver User Guide Rev-12.8 - Page 79
Rev. 12.8_100