Kyocera FS-1028MFP FS-1028MFP/1128MFP Operation Guide Rev-3 - Page 358
Send error., Error occurred., Turn the main power, switch off and on., Incorrect account ID., Error - scan error 2101
View all Kyocera FS-1028MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
Troubleshooting Error Message Checkpoints Send error. - #### Error occurred. - Turn the main power switch off and on. Incorrect account ID. - Corrective Actions Reference Page 1105: E-mail - The SMTP protocol setting is turned off. Use COMMAND CENTER and turn on the SMTP protocol setting. Scan to PC (SMB) - SMB setting is turned off. Use COMMAND CENTER and turn on the SMB setting. Scan to PC (FTP) - FTP setting is turned off. Use COMMAND CENTER and turn on the FTP setting. 1106: The sender address setting under E-mail: SMTP is not registered. Use COMMAND CENTER and register the sender address. 2101, 2102, 2103, 2201, 2202, 2203, 3101: The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is not set correctly. Use COMMAND CENTER and register the SMTP server name and the host name correctly. 2204: The E-mail size exceeds the - acceptable send data capacity. Decrease the size or resolution of the scanned data to be transmitted and resend the E-mail. 5101, 5102, 5103, 5104, 7102, 720f: - Turn the main power switch off and back on. If this error occurs several times, make a note of the displayed error code and contact your service representative.(Refer to the corrective action for the error message " An error has occurred.") 9181: The scanned original exceeds - the acceptable number of pages of 999. Send the excess pages separately. System error has occurred. Turn the - main power switch off and on. The Account ID does not match. - Check the registered Account ID. 10-8 OPERATION GUIDE