Kyocera FS-1028MFP FS-1028MFP/1128MFP Operation Guide Rev-3 - Page 420

Choosing the Appropriate Paper This section describes guidelines for choosing paper. Condition Avoid using paper with bent corners or that is curled, dirty, or torn. Do not use paper that has a rough surface or paper fiber lint, or that is especially delicate. Use of paper in any of these conditions will not only deliver poor copies but may also cause jams and shorten the useful life of the machine. Choose paper with a smooth and even surface; however, avoid coated paper or paper with a treated surface as it may damage the drum or fusing unit. Ingredient Do not use paper such as paper that has been coated or surface-treated or paper that contains plastic or carbon. These paper may produce harmful fumes from the heat of printing and may damage the drum. Be sure to use the standard paper that contains at least 80% pulp, i.e., not more than 20% of the total paper content consists of cotton or other fibers. Supported Paper Sizes Paper of the following sizes is supported by the machine. Measurements in the table take into account a ±0.7 mm dimensional accuracy for length and width. Corner angles must be 90° ± 0.2°. Multi Purpose Tray Cassette or Multi Purpose Tray B6 (128 × 182 mm) Letter ISO B5 (176 × 250 mm) Legal Envelope #10 (Commercial #10) (4 1/8 × 9 1/2") Statement * Envelope #9 (Commercial #9) (3 7/8 × 8 7/8") Executive Envelope #6 (Commercial #6 3/4) (3 5/8 × 6 1/2") Oficio II Envelope Monarch (3 7/8 × 7 1/2") A4 (297 × 210 mm) Envelope DL (110 × 220 mm) A5 (210 × 148 mm) Envelope C5 (162 × 229mm) A6 (105 × 148 mm) * Hagaki (100 × 148mm) B5 (257 × 182 mm) Oufuku Hagaki (148 × 200 mm) Folio (210 × 330 mm) Youkei 4 (105 × 235 mm) 16K (273 × 197 mm) Youkei 2 (114 × 162 mm) Size Entry (70 × 148 to 216 × 356 mm) * Except for the optional cassettes. Appendix-12 OPERATION GUIDE