Home » Kyocera Manuals » Printers » Kyocera FS-1028MFP » Manual Viewer

Kyocera FS-1028MFP FS-1028MFP/1128MFP/KM-2810/2820 Driver User Guide Rev-12.1 - Page 25

Locking Driver Settings, SNMP, SNMPv3 Options, Unlock Password

Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

KX DRIVER Device Settings The administrator can also set a password that is required to temporarily unlock a feature. If selected, this setting prompts you to enter a password and confirm the password. Locking Driver Settings You can select driver settings to lock, so that the settings are applied to all print jobs. 1 In Device Settings > Administrator Settings, click Lock Settings. 2 Select the check box for each driver feature to be locked. 3 Select the Password Settings check box if you wish to protect the settings with a password, otherwise skip to the next step. In the Password Settings dialog box, type a password of at least 4 but no more than 16 characters. Retype the password in Confirm password, and click OK. To unlock the password, clear the Password Settings check box. In the Unlock Password dialog box, type the password, and click OK. 4 To save your Lock Settings selections, click OK at the bottom of the dialog box. When a password is set, the Unlock button appears in driver tabs where the locked features appear. To unlock a feature and change its settings temporarily, click Unlock and type the password. SNMP Simple Network Management Protocol (SNMP) is a set of rules that govern the management of network devices, such as printing systems. SNMP settings determine the level of security when using the Auto Configure feature, and prevent unauthorized printing to the SNMPv3 printing system. SNMP settings must be set in the printer driver and in the printing system's Command Center. The following SNMP options are available: SNMPv1/v2c This option ensures successful Auto Configure communication using Read community name and Write community name. SNMPv3 This option ensures secure Auto Configure communication using a user name and password. Authentication and privacy options are available by selecting Settings. Apply to other models This option displays a list of installed printing systems to apply the selected SNMP settings. SNMPv3 Options You can select SNMPv3 options for secure communication with the printing system. Authentication This option provides an algorithm to check that a transferred file has arrived intact. Message Digest 5 (MD5) and Secure Hash Algorithm 1 (SHA1) are hash algorithms used to authenticate packet data. 2-9

Section	Page
Table of Contents	3
1 Installation	6
Preparing to Install the Driver	6
Selecting an Installation Method	6
Installing Utilities	7
Upgrading Driver Components	7
Express Installation	7
Installing in Express Mode	7
Custom Installation	9
Installing in Custom Mode with a Network Connection using Discover	9
Installing in Custom Mode with a USB Connection using Discover	10
Installing in Custom Mode with a Network Connection using Custom Select	12
Installing in Custom Mode with a USB Connection using Custom Select	13
Optional Printer Components	14
Installing Optional Printer Components	14
The Add Printer Wizard	15
Installing a Printer Driver in Windows 7 and Windows Vista	15
Installing a Printer Driver in Windows XP and Windows 2000	15
Printer Driver Settings Access	16
Changing the Default Driver Settings	16
2 Device Settings	17
Accessing Device Settings	17
Device Options	18
Setting Device Options	18
Auto Configure	18
Enabling Auto Configuration	18
Memory	19
Setting the Memory	19
Administrator Settings	19
User Login	19
User Login Options	19
Printing with User Login	20
Job Accounting	21
Job Accounting Options	21
Printing with Job Accounting	22
Show Quick Print Tab	22
Send Count Information	23
Send Application Name	23
Administrator Password	23
Setting the Administrator Password	23
Clearing the Administrator Password	23
Associate Profile with Application	23
Lock Settings	24
Lock Settings Options	24
Locking Driver Settings	25
SNMP	25
SNMPv3 Options	25
Selecting SNMP Settings	26
User Settings	26
Identification	27
Setting User Identification	27
Units	27
Selecting a Unit of Measurement	27
Language Preference	27
Setting Language Preference	27
PDL (Page Description Language)	27
PDL Options	28
PDL Settings	29
Selecting a PDL	29
PDF Options	30
Printing and Saving to PDF	31
XPS Driver	31
Compatibility Settings	32
Media Source Enumeration	32
Setting Media Sources	32
Ignore Application Collation	32
Selecting Printer Driver Collation	32
Combine Source and Media Type Lists	33
Creating a Combined Source List	33
Removing a Plug-in	33
3 Quick Print	34
Quick Print Options	34
Common Printing Options	34
Collate	35
Duplex Printing	35
Multiple Pages per Sheet	36
Edit Quick Print	36
Editing Quick Print Options	36
Profiles	36
Selecting a Profile	37
Saving a Profile	37
Editing a Profile	38
Importing a Profile	38
Exporting a Profile	38
Application Based Printing	39
Adding an Association	39
Editing an Association	39
4 Basic	41
Basic Settings	41
Source and Media Types	42
Print Size and Page Size	42
Creating a Custom Page Size	43
Printing with Custom Size Pages	43
Duplex Printing	43
Printing in Duplex Mode	44
Collate	44
Printing Collated Documents	45
Quality	45
Print Preview	45
Previewing a Print Job	45
Kyocera Logo	46
Displaying Version Information	46
Displaying Plug-in Information	46
5 Layout	47
Multiple Pages per Sheet	47
Printing Multiple Pages per Sheet	47
Scaling	48
Setting Scaling on the Page	48
Gutter	48
Creating a Gutter	48
Booklet	49
Printing a Booklet	49
Poster	49
Printing a Poster	50
6 Imaging	51
Print Quality and Custom Quality	51
Selecting Print Quality	51
Selecting EcoPrint	52
Fonts	52
Font Settings	52
Selecting Font Settings	53
Font Substitution	53
Setting Font Substitution	53
Disable Device Fonts	54
Disabling Device Fonts	54
Graphics	54
Selecting Graphics Settings	54
Pattern Scaling	54
Inversion Settings	55
Optimization Settings	55
CIE Optimization	55
Halftone Screen	55
Setting the Halftone Screen	56
Adjusting Grayscale	57
Selecting Text and Graphics Effects	57
7 Publishing	58
Cover Mode	58
Printing Covers	58
Cover Mode Options	59
Choosing Cover Media	61
Page Insert	62
Printing Page Inserts	62
Page Insertion Options	63
Transparency Interleaving	63
Interleaving Transparencies	64
8 Advanced	65
Prologue/Epilogue	65
Selecting a Prologue/Epilogue File	65
Editing a Prologue/Epilogue File	65
Deleting a Prologue/Epilogue File	66
Assigning a Prologue/Epilogue File	66
Unassigning a Prologue/Epilogue File	66
Specifying the Insertion Point	66
Watermark	67
Adding or Editing a Watermark	67
Selecting Pages for Watermark	68
Security Watermark	69
Adding or Editing a Security Watermark	70
Adjusting Security Watermark Calibration	71
Selecting Pages for Security Watermark	71
Configuring Status Monitor	72
Setting Status Monitor Preferences	73
EMF Spooling	74
Selecting EMF Spooling	74
Enable Client Profile	74

Match case Limit results 1 per page

Device Settings

The administrator can also set a password that is required to temporarily

unlock a feature. If selected, this setting prompts you to enter a password

and confirm the password.

Locking Driver Settings

You can select driver settings to lock, so that the settings are applied to all print

jobs.

Device Settings

Administrator Settings

, click

Lock Settings

Select the check box for each driver feature to be locked.

Select the

Password Settings

check box if you wish to protect the settings with

a password, otherwise skip to the next step.

In the

Password Settings

dialog box, type a password of at least 4 but no more

than 16 characters. Retype the password in

Confirm password

, and click

To unlock the password, clear the

Password Settings

check box. In the

Unlock Password

dialog box, type the password, and click

To save your

Lock Settings

selections, click

at the bottom of the dialog

box.

When a password is set, the

Unlock

button appears in driver tabs where the

locked features appear. To unlock a feature and change its settings temporarily,

click

Unlock

and type the password.

SNMP

Simple Network Management Protocol (

SNMP

) is a set of rules that govern the

management of network devices, such as printing systems.

SNMP

settings

determine the level of security when using the

Auto Configure

feature, and

prevent unauthorized printing to the

SNMPv3

printing system.

SNMP

settings

must be set in the printer driver and in the printing system’s Command Center.

The following

SNMP

options are available:

SNMPv1/v2c

This option ensures successful

Auto Configure

communication using

Read

community name

and

Write community name

SNMPv3

This option ensures secure

Auto Configure

communication using a user

name and password. Authentication and privacy options are available by

selecting

Settings

Apply to other models

This option displays a list of installed printing systems to apply the selected

SNMP

settings.

SNMPv3 Options

You can select

SNMPv3

options for secure communication with the printing

system.

Authentication

This option provides an algorithm to check that a transferred file has arrived

intact. Message Digest 5 (

MD5

) and Secure Hash Algorithm 1 (

SHA1

) are hash

algorithms used to authenticate packet data.

KX DRIVER

2-9