Kyocera FS 1800 Kyocera Extended Driver 4.0 User Guide Rev-2.1
Kyocera FS 1800 - B/W Laser Printer Manual
UPC - 632983001028
View all Kyocera FS 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS 1800 manual content summary:
- Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 1
Kyocera Extended Driver Version 4.0 User Guide - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 2
Windows 95/98/Me/2000 environments. Models supported by the KX printer driver Copier/ MFP KM- 1650 KM- 1815 KM- 2050 KM- 2530 KM- 2550 KM- 3035 KM- 3530 KM- 4030 KM- 4035 KM- 4530 KM- 5035 KM- 5530 KM- 6030 KM- 6330 KM- 7530 KM- 8030 KM- C830 KM- C830D KM- C850 KM- C850D KM- C2520 KM- C2630 KM - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 3
Basics Basic Printing Tasks 3-1 Basic Printing 3-1 Printing on Paper of Non-Standard Sizes 3-7 Custom Paper Sizes 3-7 Duplex Printing 3-9 Print on Both Sides 3-9 Manual Duplex 3-10 Reverse Order Printing 3-13 Collating Modes 3-14 Sorter Modes 3-15 Collate 3-16 Non-Collating 3-16 i - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 4
Chapter 4 Layout Booklet 4-1 Left Edge and Right Edge Binding 4-2 Booklet Printing 4-2 Multiple Pages Per Sheet 4-3 Poster 4-4 Sheets Per Page 4-5 Available Poster Sizes 4-5 Scaling And Gutters 4-7 Scaling 4-7 Gutter 4-7 Chapter 5 Finishing Staple 5-1 Using the Stapler 5-2 Punch 5-2 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 5
Page Insert 7-5 Insert Page Printing 7-5 Combinations 7-7 Transparency Interleaving 7-8 Chapter 8 Job Job Storage (e-MPS 8-1 Temporary and Permanent Jobs 8-2 Virtual Mailbox 8-8 Quick Copy 8-16 Proof and Hold 8-17 Private Print 8-18 Job Storage 8-20 Synergy Print Box 8-21 Form Gallery - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 6
installed, a variety of printing system settings can be configured. Note: In Windows XP or 2000, you must be logged into the system with administrator privileges to install the printer driver. When installing the printer driver, you must specify the connection method and port. Once the printer - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 7
you want to use appears in the Use the following port: list, select the port, click Next, and then proceed to step 6 on page 1-7. 4 User Guide 1-2 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 8
step 6 on page 1-7. 5 If the port is not in the list, select Create a new port, select the port type from the menu, and click Next. 6 Instructions for creating a new USB port are below. To create a network port, see Create a New Network Port on page 1-5. 7 USB Port 1 If there are no USB - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 9
Installation 2 The KM USB Port monitor dialog box appears. Confirm the Port name and click Advanced.... 2 3 The Serial number list appears. Confirm the All printing systems available on network servers appear. • If you have directly typed in the print server name, click Next. User Guide 1-4 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 10
Network Port 1 The Select the Printer Port dialog box appears. Select KPrint Port: from the Create a new port: Type list, and then click Next. 1 1-5 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 11
printing systems displays. Select the network printing system, then click OK. Click Next to continue. 4 Confirm the destination printer port name and click Next. 4 User Guide 1-6 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 12
dialog box appears. Select Yes or No to use the printing system as the default printing system for Windows-based programs. Click Next. 6 7 The Printer Sharing dialog box appears. If you do not want the test page does not print properly, click Troubleshoot to determine the problem. 1-7 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 13
dialog box appears. Verify the settings and click Install. The printer driver installation begins. 9 10 Once the installation is complete, the Printer Yes and click Next to install additional printer drivers. The New Printer Installation dialog box appears. • Select No to complete - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 14
the check box of the components to install, and click Next. Follow the instructions in the dialog box to proceed. 2 13 The Confirm Settings dialog box , and click Finish. • Select Yes to install additional printer drivers, and then click Next. When you have completed installing printing systems - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 15
the installed printer driver settings including: The Printers and Faxes window appears. 1 Windows 98/Me/2000: Open the Printers window. 2 Right-click the printer icon in the Printers and Faxes window. A list Optional Devices With the Printer Properties window displayed, open the Device Settings - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 16
be automatically selected. If auto configure is not available, then printing system memory can be seen on the status page. To generate a status page, 2-2 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 17
dialog box appears and virtual mailboxes can be created. For further details, see Virtual Mailbox on page 8-8. Note: An installed hard disk supports the following options: Quick Copy, Proof and Hold, Private Print, Job Storage, Virtual Mailbox, Temporary Storage, and Permanent Storage. User - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 18
's operation panel. For further details, consult the printing system's Operation Guide. RAM Disk Settings 1 In the Device options list, enable the 8 MB. For further details, consult the printing system's Operation Guide. User Settings The following user information can be configured by clicking - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 19
language from the Language preferences list. To activate the new language, click OK in the User Settings and then in the Properties dialog box. User Guide 2-5 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 20
based on the printing system. You can choose from PCL XL, PCL 5e, PCL 5c, or KPDL (Kyocera Page Description Language). We recommend PCL XL for most printing purposes. After you select a PDL, the selection return to application • Lacks backward compatibility with earlier PCL versions 2-6 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 21
support • Wide selection of fonts for use with Microsoft Windows applications support PostScript 2 or 3. • An optional KPDL upgrade kit may be required for some models. • Kyocera models, when PCL XL is selected. 3 User Guide PCL XL Option Disable auto media type switching Description - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 22
data passthrough Description Data passthrough reduces errors when printing complex jobs from applications users. Note: For further details, see Job Accounting in the Operation Manual on the Document Library CD-ROM. Operation Panel Message You can specify , click Administrator. 1 2-8 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 23
job name is the name sent from the application to the printer driver or it can be selected in the Job dialog box before printing. The user name is the information entered according to the instructions in Identification on page 2-5. Displays the user group during printing. . 1 User Guide 2-9 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 24
for cassettes or feeders, so your newly installed Kyocera Extended driver maintains identical media source support with the driver it replaces, whether for a Kyocera driver or from another manufacturer. If media source macros exist for the older driver, then the alignment of media source values will - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 25
do not have a duplex unit and you want to print using Manual Duplex (see page 3-10). Disable face-up reverse page order driver's Device Settings consistent with the actual printing system devices. Auto Configure currently supports these ports for Microsoft Windows operating systems: • Windows 98 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 26
address or the printing system name (Host name). Note: Auto Configuration is not supported for Microsoft Windows 95. Click Auto Configure. An "in progress" message will appear. The the time out. • The Windows XP firewall prevents the communication. It generates the following message: 2-12 KX - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 27
The default setting for Windows XP Service Pack 2 is for the Windows Firewall to be set to On. When the Windows Security alert shown above appears Auto Configure is added to the Windows Firewall exception list, as shown in the example below. The Windows Firewall is accessed through the Control - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 28
describes the following printing tasks when printing from Microsoft Windows applications. • Basic Printing Tasks • Printing on the application's File menu, select Print. The Print dialog box appears. 2 User Guide 3 Select the desired printing system from the list of available printing systems. 3 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 29
Printing Basics When using Microsoft Word, we recommend that you click Options and for default tray select Use printer settings. 5 Click OK. 5 6 Click Properties to open the Properties dialog box. 6 User Guide 3-2 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 30
document. The document image is adjusted to match the size you select. 1 In the Properties dialog box, from the Basic tab click Page Sizes. 1 3-3 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 31
tab, click the Print Size list and select the preferred output paper size.3 User Guide 4 Confirm that the proper paper size is loaded. Click OK to return to the scaled to fit the output paper size. If you would like to manually input the Scaling percentage, see Scaling And Gutters on page 4-7. - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 32
tab by default when you are printing on regular paper. However, the printing system supports a wide variety of printing media depending on your printing system model. You can is properly loaded by following the instructions outlined in the supplied printing system's Operation Guide. 3-5 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 33
setting, open Printer Properties from the Microsoft Windows Printer and Faxes window, go to Device settings and then Compatibility Settings For further details on MP tray modes, refer to the printing system's Operation Guide. 2 Specify the media type at the operation panel on the printing system - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 34
to the printing system's Operation Guide. 1 2 Click Start in the Windows taskbar and then select Printers and Faxes. The Printers and Faxes window appears. 2 Note: Windows 98/Me/2000: Open the printer driver properties by clicking Start in the Windows taskbar and then selecting the Printers - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 35
) 8 Click OK. 9 Repeat the steps above if you want to add other custom paper sizes. A maximum of 20 different paper sizes can be added. User Guide 3-8 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 36
required depending on the printing system model. For further details, refer to your printing system's Operation Guide. For information on Booklet printing, see Booklet Printing on page 4-2. In the table below, the menu from the applications's Print dialog box, open Properties. 1 3-9 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 37
4 Click OK to start printing. 4 Manual Duplex Manual duplex enables printing on both sides of a . Manual Duplex is available in some models that do not have a duplex unit. Manual Duplex is not available when any of the options in the Advanced tab are used. The steps for using Manual - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 38
Some Kyocera printing systems have a manual duplex setting in Printing Properties, in the Basic tab. Instructions for using this method for manual duplex Manual Duplex Settings • The printing system must be set to a local port. - OR • The Source selection must be Cassette 1 or Cassette 2. KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 39
port in Windows 9x. See Compatibility Settings on page 2-10 for instructions on changing compatibility settings. Print on Both Sides 1 In the Basic tab, select Cassette 1 or Cassette 2 from the Source list. 1 2 Select the Print on both sides (manual duplex) check box. 2 User Guide 3 Select - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 40
over on the short edge and put the pages into the cassette. 7 Click OK in the Manual Duplex Instruction dialog box. 7 The odd-numbered pages will be printed. Reverse Order Printing Prints document pages 1 2 From the Basic tab, select the output tray from the Destination list. 2 3-13 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 41
of output trays and their receiving capacity (the number of sheets) varies depending on the sorter model. Refer to your sorter's Operation Guide. Frequently, the application settings are given priority, causing a change in the sorter output method depending on the application. Verify these settings - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 42
is not available on all printing system models. • Mailbox is a physical mailbox and is different from Virtual Mailbox (see Virtual Mailbox on page 8-8.) 3-15 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 43
the application's Print dialog box and begin printing. The specified number of copies of each page of the document are delivered to each tray.4 User Guide 3-16 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 44
You can use optional document finishers to fold and staple the booklet. For further details on Staple settings, refer to Staple on page 5-1. The supported paper sizes for Booklet printing are A3, B4, A4, A5, B5 (JIS), ledger, letter, legal, statement, and folio. Booklet printing can be used with - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 45
Outside Inside Inside Booklet Printing 1 Select Print from the File menu. From the applications's Print dialog box, open Print Properties. 1 2 Click the Layout tab. 2 User Guide 4-2 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 46
box, open Properties. (Select Print from the File menu, and select Properties.) 10 2 Click the Layout tab. 11 3 Select Multiple pages per sheet. 12 4-3 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 47
). For further details on changing the page description language, refer to PDL Settings on page 2-6. You can print a document in a larger size than the paper supported for the printing system. The Poster feature allows you to increase the print size, print portions of the User - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 48
based on the selected Page size in the Basic tab. For further details on selecting a page size, refer to Basic Printing Tasks on page 3-1. 4-5 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 49
are new to poster printing, you may want to print a proof sheet, in addition to the poster, to guide you in assembling the printed poster sheets. The proof sheet displays all poster pages on one sheet with markings on adjoining sheets. Assemble each sheet edge to the same numbered User Guide 4-6 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 50
the Left box. The Left option may not be available, depending on your Orientation and Print on both sides settings in the Basic tab. 4-7 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 51
to change the page size (for example, to enlarge an A4-size brochure for printing on A3 paper), refer to Print Sizes on page 3-3. User Guide 4-8 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 52
of finishing equipment. The Finishing tab is available for models that support optional finishing devices such as Multi finisher or Booklet stitcher. to Booklet on page 4-1. User Guide After installation, optional equipment must be selected in the printer driver in the Device Settings tab. For - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 53
available stapling positions: Upper left, Upper right, or Booklet. (Some models support multiple booklet positions.) 4 Note: You can increase the left or top about stapler specifications, refer to your finishing device's Operation Guide. The Punch feature is available on printing systems with an - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 54
to the output tray. For further details about hole punch specifications, refer to your finishing device's Operation Guide. Positioning the Hole Punch Note: Some models do not support the punch position option. 1 With Punch selected in the Finishing tab, click the Settings button. 1 2 In the - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 55
: Offset jobs and Rotate copies will not be available at the same time. Some models do not support both options. Offset Jobs Offset jobs physically shifts each print job in the output tray. This feature down finishing tray, such as Finisher (face down) or Tray A (face down). 2 User Guide 5-4 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 56
tab, then select Separation. The Rotate copies option is selected. 4 5 Click OK to return to the Print dialog box. 5 6 Click OK to start printing. 6 5-5 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 57
Finishing Your print job will be stacked in the output tray with each copy alternating horizontally and vertically. User Guide 5-6 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 58
Finishing 5-7 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 59
printing system resolution. Prints using the second highest printing system resolution. Prints at a resolution of 600 dpi. Choose your own combination of settings for Resolution, Kyocera Image Refinement, and EcoPrint. User Guide 6-1 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 60
Settings You can select one or more Custom Quality Settings: • Resolution • Kyocera Image Refinement • EcoPrint These settings can extend the life of toner cartridges by adjusting print resolution to reduce the amount of toner used. Note: The availability of EcoPrint on color printers depends on the - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 61
fonts, or Asian fonts. • For operating systems with fewer TrueType system fonts (Microsoft Windows 3.1, Windows 98 and Millennium Edition), non-TrueType fonts can only be downloaded as bitmaps. System a large document. This selection replaces the old font with the desired font. User Guide 6-3 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 62
Imaging Note: GDI compatible mode does not support Substitute with device fonts. Font Substitution With Substitute with device fonts selected as the only when a specific PDL is selected. To view or change PDL settings, in the Windows Printers and Faxes folder, right-click the icon 6-4 KX - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 63
images like a photo negative, reversing black and white areas of the image. Prints the page content backwards, as it would appear in a mirror image. User Guide 6-5 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 64
. Number of rows of dots per inch or centimeter. Enter a numeric value in the Frequency text box, and select lines/inch or lines/cm. 6-6 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 65
Grayscale User Guide Imaging Halftone Screen Option Angle Shape Increase accuracy of screens Description Select the angle at which rows are aligned. An angle is measured in degrees, - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 66
as used for output printing). RGB is an acronym for Red, Green, and Blue. CMYK is an acronym for Cyan, Magenta, Yellow and Black. 6-8 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 67
and mid-tone adjustment Fruit Hue adjustment 5 Select HSL (hue, saturation, lightness) or RGB (red, green, blue) as the color space to work with. 5 User Guide 6-9 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 68
is dragged, or a value is typed in the box. The horizontal bracket above the upper color bar shows the part of the color bar affected by the adjustment. The lower color bar provides a reference point to the color bar options. Options for ICM (Image Color Management) are available by 6-10 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 69
under ICM Settings. Note: ICM technology is not supported in Windows 95 or Windows NT. Processes the color data without applying the Picture image Prints black text and graphs in black toner only. Prints black text and graphs in four-color toner (CMYK). Prints images and graphs similar to colors - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 70
text, and graphs in vivid color (black prints with black toner only). Prints images, text, and graphs in vivid color (black prints with four-color toner (CMYK)). ICM Color Correction 1 In the Color Correction dialog by adjusting hue to preserve the vividness of pure colors. 6-12 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 71
Cover mode, Page insert, and Transparency interleaving features of the printer driver. When these options are used with the MP tray, cassette mode setting), must be set. For further details, refer to the print system's Operation Guide. • Cover mode: Adds a front or back cover to your document. • - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 72
Front Cover Insertion Type Inserts a blank front cover. Front 5Front Outside Front cover Prints on the outside surface of the front cover. Front cover 7-2 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 73
Back 5Front Inside Duplex Printing (page 3-9) Prints on the inside surface of the front cover and inserts a blank back cover. Back cover Front cover User Guide 7-3 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 74
Outside 5Front Inside 5Back Inside 5Back Outside Duplex Printing (page 3-9) Prints on both sides of the front and back covers. Back cover Front cover 7-4 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 75
Heavy, thin, or other special papers must be supplied from the MP tray. Media type selections are not supported for KM-1510. 2 Load the paper for the front and back cover in the paper cassette selected in step 1. ). 1 2 In the Properties dialog box, click the Publishing tab. 2 User Guide 7-5 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 76
a blank page before the second page. 5Page insert 5Print onto Front Inserted page Prints on the front surface of the inserted page. Inserted page 7-6 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 77
of insertions in a range of pages, use a hyphen (-). For example, to insert a page before pages 5, 11, 12, 13, and 18, enter [5,11-13,18]. 2 User Guide 7-7 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 78
Settings dialog box, select Auto (Transparency). 2 If the Source and Media type lists have not been combined, from the Media type list, select Transparency. 3 7-8 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 79
prompt you to load transparencies into the MP tray, and, if necessary, load backing paper into the selected cassette. 7 7 Click OK to begin printing. 8 User Guide 7-9 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 80
below. Printer Driver Menu Options Temporary and Permanent Jobs Virtual Mailbox Quick Copy Function Job Deletion Access after Printing Code Stores print jobs for See page 8-2 No printing later using KM-NET for job Menu> e-MPS> Same as for Quick Copy original job (adjustable) User Guide 8-1 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 81
Job Printer Driver Menu Options Function Job Deletion Access after Printing Code Proof and Hold is turned off Deleted after printing Saved until manually deleted Saved until manually deleted Saved until manually deleted No Yes Optional No No Panel Message with multiple copies. User Guide 8-2 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 82
, the dedicated KM-NET for Clients Job Manager utility is required. Use KM-NET for Clients to Print Saved Jobs Again To print out jobs, the KM-NET for Clients utility must first be installed on your computer. The utility is located on the supplied Kyocera Software Library CD-ROM. 8-3 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 83
driver must be installed on it. A local connection cannot be used in Windows 2000. From the CD-ROM Main Menu dialog box, select Printer Utilities, then KM the KM-NET Job Manager utility: 1 Click Start in the Windows taskbar and All Programs. Windows 98/Me: Click Programs, Kyocera, and then KM Net - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 84
Ctrl key. Saved jobs are stored on the hard disk. Note: To delete jobs manually, right-click on the job name and select Delete from the list. For further details, refer to KM-NET for Clients Operation Guide. Print Additional Copies of Saved Jobs You can reprint saved print jobs using the optional - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 85
Options to open the Barcode Options dialog box. 4 5 Select the Barcode check box. Select Print on first page only or Print on all sheets. 5 User Guide 8-6 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 86
table below. Orientations Horizontal Upper-Right Position Lower-Right Upper-Left Lower-Left Vertical When printing, the barcode is printed in the designated position. 8-7 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 87
by the barcode reader, the printing system outputs that page. Barcode Reader Job Code Using the Barcode Reader to Read the barcode • If the barcode on reader. For further details, refer to the barcode reader's Operation Guide. Virtual Mailbox With the Virtual mail box feature, mailboxes created on - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 88
refer to Create Virtual Mailboxes on page 8-9. Use the printer driver to select a virtual mailbox for saving a job. Examination system's Operation Guide. Create Virtual Mailboxes 1 Click Start in the Windows taskbar, and click Printers and Faxes to open the Printers and Faxes window. 1 2 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 89
. The Properties dialog box appears. Click the Device Settings tab. 3 4 Select the Hard Disk check box. The Hard Disk Settings dialog box appears. 4 User Guide 5 Click New and enter any name into Mailbox name. 5 For example, name the mailbox after the user or department. The name can be up to - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 90
section onto your personal computer or network. Once saved, the list can be imported into other printer drivers. Export 1 Click Start in the Windows taskbar, and click Printers and Faxes to open the Printers and Faxes window. 1 2 Right-click the icon for your printer in the Printers and Faxes - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 91
, and click Printers and Faxes to open the Printers and Faxes window. 1 2 Right-click the icon for your printing system in the Printers and Faxes window. A list appears. 2 3 Click Properties in the list. The Properties dialog box appears. Click the Device Settings tab. 3 User Guide 8-12 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 92
. 8 Save Jobs in Virtual Mailboxes 1 From the application's Print dialog box, open the Properties. Select Print from the File menu and select Properties. 1 8-13 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 93
Create Virtual Mailboxes on page 8-9. 5 The Virtual Mailbox Selection dialog box appears. Select the mailbox for saving the job, and click OK. 5 User Guide 6 Close the Properties dialog box. The job is saved to the virtual mailbox on the hard disk and held for printing. 6 • Printing the list - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 94
until e-MPS >appears. 2 3 Press the X key to open the submenu. 3 4 Press the S or T key repeatedly until the display looks like the example shown below. 4 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 95
After using the quick copy feature, a document can be reprinted from the operation panel. 1 In the Properties dialog box, click the Job tab. 1 User Guide 2 Select the Job storage (e-MPS) check box. For Quick copy printing, select Quick copy. 2 3 You can name the job for later reference when - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 96
or T key until the correct name appears. 6 7 Press the ENTER key. Follow the instructions in Identification on page 2-5 to continue. 7 8 The job name appears with a blinking Settings dialog box as indicated in the instructions for Quick Copy on page 8-16. Select Proof and hold. 1 8-17 KX - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 97
User Guide disk until the printing system is turned off. To delete jobs manually, use the same key operations as explained in Deleting Quick Copy print jobs are saved to the hard disk for printing until a four-digit access code is entered. The saved jobs are deleted as soon as they are printed. - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 98
the ENTER key.7 8 The user name displayed is specified following the instructions in Identification on page 2-5. If this is the correct job for name appears, then press the ENTER key. 9 10 Enter the four-digit access code created in Private Print on page 8-18. 10 11 Press the S or T Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 99
You can also use access codes to restrict the printing of forms. 1 In code check box and enter the desired four-digit access code using numbers between 0 and 9. When you want to print the saved jobs, enter the access code off. To delete them manually, follow the same steps as for Deleting - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 100
print boxes. Copier documents and print jobs from various applications can be combined. This feature is available on KM-4530, KM-5530, KM-6230, KM-6330, and KM-7530. See your printing system's Operation Guide for more is now stored in the printing system's memory, in a print box. 8-21 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 101
Document Management key. 1 2 The Document Management menu appears. Under Synergy Print Box, select Document reg. 2 3 Select a print box from the list. 3 User Guide 4 (Optional) To give a custom name to the document, touch Change name, and then enter the name on the typepad that appears. Click - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 102
-alphabetical order. To sort, select Order of indication, and then choose one of the sorting options. • To manually select the print order, touch/select the documents in the order in which you want them to print. A of documents that appears, select the document you want to print. 4 8-23 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 103
image, send it from your computer or scan it at the printing system. You can also print out a list of stored images, check and User Guide 8-24 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 104
J. Longshanks This feature is available on KM-4530, KM-5530, KM-6230, KM-6330, and KM-7530. See your printing system's Operation Guide for more information on this feature. To system's operation panel, press the Copier key. 1 2 Select User choice and then Forms Overlay. 2 3 Select On. 3 KX - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 105
, to a maximum of 79 characters. Job Option (Tandem Print) Distributes a large print job between two printing systems, effectively doubling print speed and providing backup printing support. Requires installation of the Tandem unit. User Guide 8-26 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 106
25 profiles can be saved in one driver, including the default profile. A set of common profiles can be installed as optional components from the Kyocera Printer Installation Wizard. Note: The Device Settings the Name, Icon, and Description.3 4 Click OK to save the profile. 4 User Guide 9-1 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 107
save the profile. 3 Import 1 Click Import in the Profile dialog box. 1 2 Select a profile and click Open. 2 3 The profile appears in the Select profile list. 3 User Guide 9-2 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 108
on your computer or network to add to the list.) Selecting a file enables the insertion point options for that file in the dialog box. User Guide 10-1 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 109
User Guide Advanced Add Click Add to browse your computer or network for command files. The files are plain text format and typically have a file name extension - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 110
list contains four standard watermarks: Confidential 1, Confidential 2, Sample and Copy. For details on creating your own watermarks, see Add Watermark on page 10-4. 10-3 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 111
User Guide Advanced Page selection Page selection options are enabled after a watermark is selected from the list. Choose one of the following: All pages The watermark prints - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 112
. • A negative x value moves the watermark text to the left. • A positive y value moves the watermark text down. • A negative y value moves the watermark text up. 10-5 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 113
the Color dialog box. 2 3 Click one of the Basic colors and click OK; or click Define Custom Colors to open the color spectrum panel. 3 User Guide 4 In the color spectrum, click and drag the pointer to different areas of the spectrum to adjust the hue and saturation levels. The corresponding - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 114
list, select a watermark to delete. 1 2 Click Delete. 2 3 In the message box, click Yes to confirm the deletion. To refuse the deletion, click No. 3 10-7 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 115
and RAM disk. Driver settings will be system and scans bar- codes on a print job or code list. You can use supports two-sided document printing. E EcoPrint Printing mode that reduces the amount of toner placed on the printed page. It extends the life of the toner cartridge. Because toner - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 116
system and stored in the driver. Once account IDs are assigned code, at the printing system's operation panel. KM-NET Software that provides network-wide management of printers and copiers. Kyocera Manual duplex Method for printing on both sides of a sheet when the printing system does not support - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 117
disk can only be removed by manual deletion, so are protected from a larger size than the maximum supported by the printer so the cumulative original document size. PRESCRIBE Kyocera's scripting language that you using the Access code. Profile A set of user defined driver settings that you save - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 118
that combines electronic and copier data into one document and stores it in your choice of virtual output print boxes. Copier documents and print , effectively doubling print speed and providing backup printing support. Requires installation of the Tandem unit. Temporary job Glossary-4 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 119
.TTF KYCW1_15.TTF Times New Roman KYCW1_31.TTF KYCW1_17.TTF Times New Roman Bold KYCW1_33.TTF KYCW1_16.TTF Times New Roman Italic KYCW1_32.TTF User Guide A-1 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 120
Medium Condensed Italic >PN Wingdings KYCW1_34.TTF KYCW1_37.TTF KYCW1_41.TTF KYCW1_38.TTF KYCW1_42.TTF KYCW1_35.TTF KYCW1_39.TTF KYCW1_36.TTF KYCW1_40.TTF KYWD_29.TTF A-2 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 121
Index A Accessing Printer Properties 2-1 Administrator Settings 2-8 job accounting 2-8 operation panel message 2-8 password 2-9 Advanced tab 10-1 Assembly marks 4-6 Assigning Virtual Mailboxes 2-3 Auto Configuration 2-11 Available device fonts 6-4 B Barcode Reader reading with 8-8 Basic Printing - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 122
KM-NET for Clients using to print saved jobs 8-3 KPDL 2-6 - 2-8, 3-5, 6-6 Kyocera Image Refinement 6-2 L Language Preference Selection 2-5 Layout 4-1 - 4-4, 4-7 Left edge binding 4-2 - 4-3 Lightness 6-10 M Macros 10-1 Mailbox, virtual 8-8, 8-10 - 8-16 Mailboxes, assigning 2-3 Manual KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 123
- 2-11 job 8-1 - 8-2 Mailbox, virtual 8-8, 8-10 - 8-16 manual duplex 3-11 PDL 2-2, 2-6 Punch 2-3 RAM Disk 2-4 user 2-4 Sorter Modes T Temporary and Permanent Jobs 8-2 printing 8-3 Toner saturation 6-2 Transparency 3-3, 7-1, 7-8 - 7-9 Transparency Interleaving 7-1 - 7-2, 7-8 - 7-9 User Guide Index-3 - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 124
W Watermark 10-1, 10-3 - 10-7 add watermark 10-4 additional text options 10-5 custom colors 10-6 delete watermark 10-7 edit watermark 10-7 page selection 10-4 Index-4 KX Driver - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 125
- Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 126
©2005 KYOCERA MITA Corporation is a trademark of Kyocera Corporation - Kyocera FS 1800 | Kyocera Extended Driver 4.0 User Guide Rev-2.1 - Page 127
ReRviesvio. n2.11.02020050.141.8
Kyocera Extended Driver
Version 4.0
User Guide