Kyocera FS-3540MFP FS-3540MFP/3640MFP Operation Guide - Page 238

Setup, Registration, and User Management > System Menu Printer Printing from computers, settings are generally made on the application software screen. However, the following settings are available for configuring the defaults to customize the machine. Item Description Emulation Select the emulation for operating this machine by commands oriented to other types of printers. Value: Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, PCL6, KPDL, KPDL (Auto) Alt Emulation If you use the KPDL (Auto) emulation mode, KPDL and another emulation mode can be automatically switched according to the data (alternative emulation). Value: Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, PCL6 KPDL Error Report When an error has occurred during printing in KPDL emulation mode, set whether or not the error report is output. Value: Off, On EcoPrint EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a problem. Value: Off, On Override A4/Letter Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. Value Off: A4 and Letter are not regarded as the same in size. On: A4 and Letter are regarded as the same in size. The machine will use whichever size is in the paper source. Duplex Select binding orientation for duplex mode. Value: 1-sided, 2-sided Bind LongEdge, 2-sided Bind ShortEdge Copies Set the default number of copies, from 1 to 999. Value: 1 to 999 copies Orientation Set the default orientation, [Portrait] or [Landscape]. Value: Portrait, Landscape Wide A4 Turn this to on to increase the maximum number of characters that can be printed in a line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This setting is only effective in PCL 6 emulation. Value: Off, On Form Feed TimeOut Receiving print data from the computer, the machine may sometimes wait if there is no information signaling that the last page does not have any more data to be printed. When the preset timeout passes, the machine automatically prints paper. The options are between 5 and 495 seconds. Value: 5 to 495 seconds LF Action Set the line feed action when the machine receives the line feed code (character code 0AH). Value: LF Only, LF and CR, Ignore LF CR Action Set the character return action when the machine receives the character return code (character code 0DH). Value: CR Only, LF and CR, Ignore CR Paper Feed Mode While printing from the computer, select how to feed paper when the paper source and type are specified. Value Auto: Search the paper source that matches the selected paper size and type. Fixed: Print on paper loaded in the specified paper source. 9-16