Kyocera FS-3750 Kyocera Extended Driver 3.x User Guide Rev-1.4
Kyocera FS-3750 - B/W Laser Printer Manual
View all Kyocera FS-3750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-3750 manual content summary:
- Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 1
Kyocera Extended Driver User Guide - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 2
XP printing environment. Essentially the same operations are used for Windows 95/98/Me/2000 environments. Models supported by the KX printer driver Copier/MFP Printers KM- 1510 KM- 1530 KM- 1810 KM- 1815 KM- 1820 / FS- 1118MFP KM- 2030 KM- 2530 KM- 2550 KM- 3035 KM- 3530 KM- 4030 KM- 4035 KM - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 3
CONTENTS Installing the Printer Driver in Windows 1 Hardware Wizard Instructions for Windows XP 7 Installing using the Add Printer Wizard 12 Printer Properties 15 Accessing the printer driver properties 16 Installing Optional Printer Devices 17 Finisher Punch Settings 18 Booklet Stitcher - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 4
61 Watermark Page Settings 62 Print Quality ...63 Grayscale Adjustment...65 Font Downloading ...66 Disable Device fonts...67 Selecting Fonts for Substitution 67 Advanced Graphic Settings -- PCL 68 -- Detailed Graphics Settings KPDL 69 Half Tone Screen Settings 71 Color Mode ...72 Color Mode - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 5
Printing the Job ID using the barcode reader 125 Reading with the Barcode Reader 126 Creating Profiles ...128 Editing Profiles ...130 Deleting Profiles...131 Importing and Exporting Profiles 131 Table of Supported Options 137 Printers 137 Copier/MFP 139 iii - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 6
iv - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 7
the Printer Driver in Windows A printer driver is an application that sends documents to the printer. Install the printer driver from the supplied Product Library CD-ROM. Once installed, a variety of printer settings can be configured. In Windows XP or 2000, you must be logged into the system with - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 8
. 6. Click Accept to proceed. 7. Click Install Software. 8. The Welcome to the Kyocera Product Software Installation Wizard dialog box appears. Click Next. 9. The Select Method dialog box appears. For the simple, default installation, select Express Mode, and click Next. Express mode is for USB - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 9
Installing the Printer Driver in Windows method you are able to choose which software packages to install. If you wish to use the Custom method, see Custom Installation on page 9 The installation program installs the software. During installation, if your printer is not connected and powered on, you - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 10
The following procedures should be performed for Windows 9X and Me. For Windows XP, see Hardware Wizard Instructions for Windows XP on page 7. In Windows 2000, all USB drivers are automatically installed without action on the part of the user. Express Installation On 9x, Me and XP, the Hardware - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 11
Installing the Printer Driver in Windows 5. When you have ensured that the location is correct, click Next. 6. Click Next to start the installation. 5 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 12
When the installation of the required software is complete, the following window will display: 7. Click Finish. 8. Click OK 9. Ensure that the file locations is C:\Program Files\Kyocera\KMSL\9xDrviers, and click OK. 6 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 13
10.Click OK. Installing the Printer Driver in Windows 11.Ensure that the file locations is C:\Program Files\Kyocera\KMSL\9xDrviers and click OK. 12.When the installation is complete, the Installation Completed Successfully dialog box appears. Click Finish to leave the install program and return to - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 14
1. Select No, not this time and click Next. 2. Click Next. 3. Click Next. 4. Click Finish. 8 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 15
Installing the Printer Driver in Windows 5. When the installation is complete, the Installation Completed Successfully dialog box appears. Click Finish to leave the install program and return to the disc main menu. Custom Installation The preceding instructions are for the Express method. This - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 16
Finish to exit the Installation Wizard and return to the main menu. At this point, you may see a reminder to connect the printer to your computer. Once you have ensured that the printer is connected, if you are using a USB connection, follow the instructions for Express Installation on page 4. 10 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 17
Printer Driver in Windows Other Options on the Installation CD Other options available on the installation menu are Remove Software, Documentation, is an .rtf file that lists the CD-ROM contents, Known Issues, and any information that did not make it into the manuals. Click on Documentation to see a - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 18
the Latest The latest Kyocera printer driver can be obtained from http://www.kyoceramita.com/ Printer Driver download/. Installing using the Add Printer Wizard This section describes how to install a printer driver using the Add Printer Wizard. 1. Click Start in the Windows taskbar, and click - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 19
the Printer Driver in Windows The wizard can also be launched by clicking Add a printer in the File menu. 3. The Welcome to the Add Printer Wizard dialog box appears. Click Next and follow the instructions. 4. When the Completing the Add Printer Wizard dialog box appears, click Finish. 5. The - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 20
14 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 21
Optional Devices • User Settings • Page Description Language (PDL) Settings • Administrator Settings • Compatibility Settings Follow the steps below to set your preferred options as the default settings These printer settings can be changed temporarily when printing from within other Windows-based - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 22
Accessing the printer driver properties 1. Click Start in the Windows® taskbar, and click Printers and Faxes. The Printers and Faxes window appears. Windows 95/98/Me/2000: Open the Start menu, and click Settings-Printers in sequence to display the Print window. 2. Right-click on the printer icon in - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 23
feeder, finisher or an additional hard disk, specify the device on the Device Settings tab of the device properties. You can also specify the memory setting, PDL settings for the user, administrator settings for front panel messages passwords, and more. Installing Optional Printer Devices 1. Click - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 24
further details, refer to Assigning Virtual Mailboxes on page 19. 4. In the Memory combo box, specify the memory capacity of your printer. This setting is required to optimize the downloading of printer fonts. Finisher Punch Settings Select the Finisher check box in the Device Options list and the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 25
Printer Properties Select 2 Hole, 2 & 3 Hole, or 2 & 4 Hole punch option depending on the optional punch unit attached to your finisher to enable hole punching. Booklet Stitcher Punch Settings The Booklet Stitcher feature enables you to set the number of holes punched in each printed page. If you - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 26
disk functions as a hard disk saving print requests into the printer's memory if a hard disk for printing is not installed. When a hard RAM disk is specified in settings on the printer operator panel. For further details, consult the printer's Operation Guide. 1. In the Device Options list, enable - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 27
the Device Options list on the Device Settings properties page. Auto Configure keeps the printer driver's Device settings consistent with the actual printer devices. Auto Configure currently supported these ports for Windows operating systems: • Windows 98 & ME - KPrint ports (Raw mode, LPR, and IPP - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 28
Identification You can display the user information for the current print job on the printer operator panel. For further details, refer to Job Name Display on page 26. 1. On the Device Settings tab, click User.... 2. The User Settings dialog box appears. In the User Name and Department fields - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 29
Printer Properties • Enter the group to which the user belongs in the Department field. User Settings dialog box choose from inches or millimeters. Language Preference Selection The Language Preference option specifies the language of the driver tabs excluding General, Sharing, Ports, Advanced, Color - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 30
Page Description Language drop-down list. Refer to the table below for options and descriptions. Options PCL XL (color and monochrome printers) PCL 5e (monochrome printers) KPDL (color and monochrome printers PDL. KPDL is used when printing from applications that support PostScript 2 or 3. An - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 31
XL Option Disable Auto Media Type Switching Description Disables the Media Type settings on the Media tab. KPDL Options Allow Data Passthrough Allow Native TrueType Download Descriptions Reduces errors when printing complex jobs from applications that use the PostScript format. Improves the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 32
Password ・ User Login (FS-1118MFP / KM-1820 only) Job Accounting Job Accounting settings are specified by the system administrator to implement an accounting system for assessing charges or other budgetary applications. The accounting system can help manage or restrict the printing volume - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 33
application to the printer driver or it can be selected in the Job Settings dialog box before printing. Displays the user name during printing. The user name is the information entered according to the instructions in Identification on page 22. Displays the user group during printing. The group name - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 34
Lock these Settings check box to access the Set Password dialog box. 2. In the Set Password dialog box, enter the new password in the New password field. Re-enter the password in the Confirm new password field and click OK. The password must be between 4 to 16 characters. Changing the Administrator - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 35
printer driver for use with multiple printing systems. Once User IDs are assigned, you can type the User ID and password. Both User ID and password must be numbers, up to 16 digits. The User Login password is different from the Administrator's password used for Lock these Settings. Use Specific User - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 36
privileges will be prompted to enter a User ID and password to print the job. The driver will search for a Windows Login User Name and add this name with the User ID and password to the User ID List in the driver. • If the user has only User privileges, the print job will be cancelled, and the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 37
The printer driver stores a maximum of 20 User IDs. To save a User ID, follow these steps: 1. In the Device Settings, tab, click Administrator, to open the Administrator Settings dialog box. 2. Select User Login. 3. Click User ID List. 4. In the User ID List dialog box, click Add. 5. In the Add User - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 38
You can import an established group of User IDs into the printer driver. This allows multiple users to choose from a standard User ID List in User Login. The imported list will replace all existing User IDs in the driver. To import User IDs, follow these steps: 1. In the Device Settings tab, click - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 39
Select User Login. 3. Select Use Specific User ID and type a User ID and password from the User IDs that are registered in the printing system. 4. Click OK in the Administrator Settings dialog box and in the Device Settings tab. 5. Open the application and print the document. To print in User Login - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 40
privileges will be prompted to enter a User ID and password to print the job. The driver will search for a Windows Login User Name and add this name with the User ID and password to the User ID List in the driver. • If the user has only User privileges, the print job will be cancelled, and the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 41
that save paper source information within documents • the paper source settings are specified by your system environment. Changing the device settings may result in printing errors. For further details on changing these settings, contact your nearest Kyocera dealer. Setting the Device Compatibility - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 42
the Disable Face-up Reverse Page Order check box to prevent Reverse Order Printing when output is face up. 5. Select the Ignore Application Collation check box to bypass the Collate setting in the application, and give priority to the printer driver setting. Click Printing Preferences on the General - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 43
Color Basic Printing Tasks The steps required to print a document created with an application are explained below. You can select the printing paper size and output location. Basic Printing 1. Insert the proper paper size (such as A4) into the printer's paper cassette. 2. From the application's File - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 44
number of copies to print in the Number of copies field. You can print up to 999 copies. When printing two or more copies, enable the Collate check box for collation. When using Microsoft® Word®, we recommend that you click Options... and select Use printer settings for the default tray. 5. Click OK - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 45
click the Media Type drop-down list and select the media type. For further details, refer to Matching the Paper Size before Printing on page 44. • The printer automatically selects paper size that matches the size specified above. A message displays requesting you to fill the multi-purpose tray if - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 46
. You can rotate the document 180 degrees by enabling the Rotated check box. The Rotated setting is required when stapling the upper-right corner of the document. For further details, refer to Reverse Order Printing on page 53. 9. Click OK to return to the Print dialog box. 10.Click OK to start - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 47
original paper size. Click the Print Size drop- down list and select the preferred output paper size. 3. Confirm that the proper paper size is loaded. Click OK to return to the Print dialog box. 4. Click OK to start printing. The proportion of the source document page size is compared to the output - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 48
Per Sheet You can print by arranging multiple pages of the source document on a single sheet of paper. When this function is enabled, the Scaling option is disabled. 1. In the Properties dialog box, click the Layout tab. 2. Specify the number of source pages in the Pages per Sheet drop-down list - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 49
enlarge the image from 20 to 500% before printing. However, only one page per sheet can be printed. 1. Click the Layout tab in the Properties dialog box, and enter the scale percentage into the Scaling (20-500%) field, or adjust the value as needed. For Windows 95 or 98, scaling is 20 - 480%. 2. If - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 50
the Paper Size before Printing The printer automatically selects the paper size specified in the Page Size setting on the Media tab by default when you are printing on regular paper. However, the printer supports a wide variety of printing media depending on your printer model. You can specify - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 51
Printing from Applications 4. Select the document paper size from the Page Size drop-down list. 5. From the Media Type drop-down list, select the type of media for printing, then click OK. 45 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 52
64 to 90 g/m2 Transparency Preprinted Labels Bond (securities) Recycled Vellum Less than 64 g/m2 Rough 90 to 200 g/m2 Letterhead Color 64 tray (MP tray) All Refer to the next section. Once printing begins, the printer automatically selects the paper to match the paper size and specified media - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 53
custom page sizes in the printer driver. 1. Load the custom paper into the printer. For further details, refer to the printer's Operation Guide. 2. Click Start in the Windows taskbar to access the printer driver properties and then select the Printers and Faxes. The Printers and Faxes window appears - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 54
mm 310 × 458 mm 297 × 431.8 mm Width = 150 mm Height = 200 mm Sample Paper Measurements (150 mm x 200 mm) 8. Click OK to save the page size and return to the Custom Paper Sizes dialog box. Confirm the name of paper size you just added. 9. Click OK. 48 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 55
add other custom paper sizes. A maximum of 20 different paper sizes can be added. Printing with Custom Paper Sizes 1. From the applications's Printer Properties, access the Print dialog box. (Select Print from the File menu.) 2. On the Media tab, select the name of your saved paper size in the Page - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 56
printer model. For further details, refer to the printer's Operation Guide. In the table below, the paper sizes and media types are not available for duplex printing Postcards Printing on Both Sides 1. From the application's Print dialog box, access the Properties. (Select Print from the File menu - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 57
. The steps for using Manual Duplex may vary, depending on your printer, what printer accessories you have installed, and what application you are printing from. The Print dialog boxes of some applications allow you to print just the odd or even pages so that you can use manual duplex, as shown in - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 58
Some Kyocera printers have a manual duplex setting in Printer Preferences, on the Layout page. Instructions for using this method for manual duplex printing are below. If the Properties or Preferences dialog boxes for your printer don't have manual duplex settings, look for an option to print just - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 59
Edge selected, turn the stack over on the short edge and put the pages into the cassette. 9. Click OK in the Manual Duplex Instruction dialog box. The odd-numbered pages will be printed. Prints document pages in reverse order, from the last page to the first. When heavy or other special papers are - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 60
printed in the document background. You can choose one of four standard watermarks or enter your own text. Selecting the Watermark 1. From the application's Print dialog box, access the Properties. (Select Print from the File watermarks, refer to Adding Watermarks on page 55. Standard Watermarks 54 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 61
Adding Watermarks You can enter the text for a new watermark. The text font, color, size, and style can be adjusted. 1. From the application's Print dialog box, access the Properties. (Select Print from the File menu and select Properties.) 2. Click the Watermark tab. 3. Clear the Disable Feature - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 62
In the Text Attributes group box, specify the Color setting. • Monochrome printers: Select 10% Gray to 90% Gray or Black in the Color dropdown list. • Color printers: Select from the Color drop-down list, or select Custom to choose additional colors. 9. In the Text Attributes group box, specify the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 63
Click OK. Selecting and Creating Custom Colors (Color printers only) In the color setting, selecting the Custom option displays the standard Windows colors. In addition to the basic system colors, you can also create customized colors. 1. When you set the color in the Text Attributes, select Custom - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 64
Lum) Adjustment: - Click and drag the slider on the right of the color matrix to adjust the luminosity level. 3. Click the Add to Custom Colors... button to add your color to the custom colors. 4. Click OK to save the custom colors. 5. Click OK to return to the Watermark Properties dialog box. 6. In - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 65
Printing from Applications Positioning Watermarks 1. In the Watermark Properties dialog box, click the Position tab. 2. Select Center on Page or User Defined to specify the text position. • User Defined: Bases the watermark text position on the X and Y values for the horizontal and vertical - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 66
check box. 4. Specify the Text Display. Adjust the number of watermarks printed and the amount of separation space between the text. • Enter the number between watermarks in the Separation combo box in millimeters or inches in the User Settings dialog box on the Device Settings tab, or use the spin - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 67
confirm the deletion. Printing from Applications Editing Added Watermarks Edit your own watermarks by following the steps below. When editing your added watermarks, you can change the watermark text, font, color on page 55, step 5 to 10 and Positioning Watermarks on page 59, step 1 to 3. 61 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 68
box, choose from All pages, First page only, All pages except first page, or Only on specified pages for printing the watermark text. Enter the pages in the text box to print the watermark on specific pages. For example, to print the watermark on pages 1, 3, 5, 6, 7, 8, 9, 10, 11, and 12, enter - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 69
Monochrome Printers Color Printers Print Quality You can specify the printer settings for Resolution and EcoPrint. Options Resolution EcoPrint Descriptions The number of dots printed in one inch. Higher resolution enables more accurate printing of specific details. Reduces the amount of toner - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 70
) Kyocera Image Refinement EcoPrint Descriptions Choose from 1200 dpi fast mode, 600 dpi, or 300 dpi. The printer models FS-1800, FS-1800+, and FS-3800 support 1200 dpi fast mode. Smoothes the outline of text and vector graphics. For color printers, this option is only available when printing in - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 71
Printing from Applications Grayscale Adjustment The Grayscale Adjustment setting is used for adjusting the brightness and contrast of graphics produced by monochrome printers. This setting is available on color printer models when the monochrome option is active. Text remains unchanged. Use the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 72
fonts 3. Click OK to save the Font Settings. True Type Font Options Download TrueType fonts as outlines Download TrueType fonts as bitmap Substitute with Device fonts Descriptions Sends fonts to the printer system as outline fonts when using multiple fonts and font sizes. This option decreases - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 73
Printing from Applications Disable Device fonts Even if you send the TrueType fonts to the printer as outline fonts or bitmap images, for common fonts, the printer substitutes fonts resident on the printer computer are listed in the System Fonts, and the printer fonts are listed in Available Device - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 74
. Refer to the options and descriptions below. Options Print Text as Black Print Graphics as Black (monochrome printers only) Descriptions Prints color and gray characters in black. There is no effect on white text, color images, or graphics. Prints color graphics and text in black, without using - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 75
Document Portability. Refer to the options and descriptions below. Image Data Format Options Fast Printing Document Portability Descriptions (Recommended) Delivers image data in binary format. You can reduce the amount of spooler data and raise printing speed. Delivers image data in ASCII (7 bit - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 76
Options settings. Refer to the options and descriptions below. Options Print Text as Black Print Graphics as Black (monochrome printers only) Reverse Image Mirror Print Halftone Screen (monochrome printers only) Descriptions Prints color and gray characters in black. There is no effect on white - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 77
Printer's Default Screens check box. 3. Select from the drop-down list for each item, or enter values into the boxes to make settings. Refer to the options and descriptions listed below. Options Ink Frequency Angle Shape Use Accurate Screens Descriptions Determines the color used for the printed - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 78
Mode Definitions table below. 1. From the Print dialog box of the application, access the printer Properties. Select Properties in the Print dialog box opened from the File menu. 2. In the Properties dialog box, click the Color tab. 3. Click the Color Mode drop-down list, and make a selection. For - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 79
This conserves CMY toners and improves the quality of black printing. Pixels are printed in multiple layers. This mode is best for printing photographs. Enhances the luster of printing. Gloss Mode is not supported for duplex printing. Converts color data to grayscale for printing. This function can - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 80
. The KX printer driver offers a variety of profiles for each simulation of ICM, Monitor and Ink. Color matching options are described below. 1. In the Properties dialog box, click the Color tab. 2. Select for your preferred settings. Color Correction Options Automatic ICM (System Corrected) None - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 81
Optimize for Exact Color (Colormetric) Utilizes the same color is needed in all print jobs, such as business logos. Optimize for Color Contrast Utilizes images or scanned photographs containing many (Best for Images) colors or shades of color. Optimize for Color Utilizes graphs or charts - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 82
mode. • Text and graphs are printed in black. • Images are printed in colors close to those used in the monitor display. • Text and graphics are printed in vivid colors. • Text and graphs are printed in black using four color toners (CMYK). • Images are printed in colors close to those used in the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 83
Printing from Applications Color Adjustment Settings -- HSL You can save the three Color Adjustment settings as a Custom selection. The setting options and saving instructions are described below. 1. From the Color Adjustment drop-down list, choose Custom 1, Custom 2, or Custom 3. 2. Click the [...] - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 84
colors emphasized by each of the photographs are different, this simplifies the color decrease the value between -180 and +180. • Specific Hue Adjustment: Select Red, Yellow, Green, Cyan, 10 and +10. • Default settings: Click the Reset button to return to the original factory default settings. 78 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 85
Printing from Applications 6. Adjust the Saturation and Lightness. • Drag the slider to adjust the Saturation, Lightness, and Contrast, or increase or decrease the values between -10 and +10. • Click the Reset button to return to the original factory default settings. 7. Click OK. 8. Click OK to - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 86
Adjustment Settings -- RGB You can save the three Color Adjustment settings as a Custom selection. The setting options and saving instructions are described below. 1. From the Color Adjustment drop-down list, choose Custom 1, Custom 2, or Custom 3. 2. Click the [...] button next to the drop-down - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 87
of red, green, and blue based on the monitor settings. • Drag each slider of the RGB setting, or increase or decrease the values between -10 and +10 in the spin box. • Click the Reset button to restore the original default settings. 6. Click OK to save the color adjustment settings. 7. Click OK. 81 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 88
82 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 89
available. For further details, refer to Booklet Printing on page 99. After installation, optional equipment must be selected by the printer driver (device settings). For further details, refer to Installing Optional Devices on page 17. Printed documents can be stapled in the positions shown below - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 90
corner. For further details, see the explanation on page 40 in step 8 in the Basic Printing Tasks section. 1. From the application's Print dialog box, access Properties. (Select Print from the File menu and select Properties). 2. On the Output tab, select Finisher (Face-down) from the Output to drop - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 91
stapled sets of 50 and 8 pages. 5. Click OK to return to the Print dialog box, and click OK to start printing. The final printed document is stapled by the finisher and delivered to the output tray. For further details about stapler specifications, refer to your supplied finisher Operation Guide. 85 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 92
by the printer driver (device settings). For further details, refer to Installing Optional Devices on page 17. Offset and Staple cannot be used simultaneously. Using the Offset 1. From the application's Print dialog box, specify the number of copies of the document to be printed. 2. Click Properties - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 93
The Punch feature inserts holes (two holes) in each printed page. The Punch feature is available on printers with supported optional finisher installed. After installing the printer driver, optional equipment must be selected in the driver in order to use the punch option (device settings). For - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 94
printer driver. When the Cover Mode, Page Insert, and Transparency Interleaving options are used with the multi-purpose tray, cassette mode (the default setting), must be set. For further details, refer to the print system's Operation Guide. • Cover Mode: Adds a front or back cover to your document - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 95
Useful Functions 3. Select the Cover Mode check box. Select your desired page arrangement as shown in the following table. 89 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 96
on the inside surface of the front cover. Front 5Print Onto Front Outside 5Print Onto Front Inside Duplex Printing (page 50). Front cover • Prints on the outside and inside surfaces of the front cover. Front and Back Front cover • Inserts blank front and back covers. Back cover Front cover - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 97
on the inside surface of the front cover and inserts a blank back cover. Back cover Front and Back 5Front Outside 5Front Inside Duplex Printing (page 50). Front cover • Prints on both sides of the front cover and inserts a blank back cover. Back cover Front and Back 5Back Inside Front cover - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 98
5Front Outside 5Front Inside 5Back Inside 5Back Outside Duplex Printing (page 50). Front cover • Prints on both sides of the front cover and inserts tray. Media type selections are not supported for the following models: KM-1510, KM-1530, KM-1810, KM04230, KM-5230, and KM-6230. 5. Click OK to - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 99
cannot be combined with the Transparency Interleaving described in Transparency Interleaving on page 96. Insert Page Printing 1. From the application's Print dialog box, access the printer Properties. (Select Print from the File menu and select Properties). 2. In the Properties dialog box, click the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 100
3. Select the Page Insert check box. Select the check box corresponding to your desired page arrangement as shown in the following table. To print on both the front and back of the inserted page, enable the Print onto Front and Print onto Back check boxes. 94 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 101
5Print onto Back Duplex Printing (page 50). Inserted page • Prints on the inside surface of the inserted page. 5Page Insert 5Print onto Front 5Print onto Back Duplex Printing (page 50). Inserted page • Prints on both sides of the inserted page. Inserted page 4. Enter the page number to insert - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 102
avoid damaging the transparencies, inserting a sheet of paper between them. This function is only available when printing transparencies supplied from the multi-purpose tray. On these inserted pages you can print the same content as for the transparencies. Transparency interleaving and Cover Mode or - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 103
Useful Functions Transparency Interleaving Method 1. From the application's Print dialog box, access the printer Properties. Select Print from the File menu and select Properties. 2. From the Source drop-down list on the Media tab, select Multi-Purpose Feeder. 3. From the Media Type drop-down list, - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 104
. 5. Select the Transparency Interleaving check box. To print the transparency content on the inserted pages as well, Select the Print onto Backing check box. 6. From the Media for 8. Click OK to return to the Print dialog box. 9. Load transparency into the multi-purpose tray. 10.Click OK and begin - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 105
bind it in the center. Booklet printing is available with printers equipped with duplexers. Stapling and binding requires optional document finishers. For further details on Staple settings, refer to Staple on page 83. The supported paper sizes for Booklet Mode printing are A3, ledger, B4, A4, and - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 106
of the list and set the number of sheets to staple together. The maximum number of sheets that can be stapled with booklet mode is 10 (40 pages). When printing documents that have more than 40 pages, the pages over 40 will be separated and printed in groups of 40 each. 7. Click OK to return to the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 107
Guide. Frequently, the application settings are given priority, causing a change in the sorter output method depending on the application. Verify these settings before printing your documents. Sorter Modes There are three sorter modes to choose from. These modes are selected on the printer driver - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 108
the specified number of copies as complete sets of documents in each tray. • The document is printed following the page order and received in each tray. The number of document copies must not exceed the number of trays. If a tray becomes full, the printer pauses and displays a message to remove the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 109
the Collate check box. 4. Select the number of complete sets in the Copies combo box. When printing using the collate option, specify the number of copies not to exceed the number of trays. The document page length must not exceed the tray capacity (for example, 200 sheets). 5. Click OK to return to - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 110
list, select Mailbox Face-down. 3. Clear the Collate check box. Click OK to return to the application's Print dialog box and begin printing. The specified number of copies of each page of the document are delivered to each tray. Mailbox Mode 1. From the Output to drop-down list, select Mailbox Face - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 111
printing onto A4 paper. The MP tray can also be used as a paper source. This function requires a hard disk installed in the printer or a RAM Disk. For further details on Hard Disk settings, refer to RAM Disk Settings on page The number of pages for all copies of the document being printed must not - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 112
with a RAM disk. Job Settings offers a variety of functions as listed below. Printer Driver Menu Function Options Job Deletion after Access Code Panel Message Default number Printing (Category) of pages printed Quick Copy After printing a job, you Saved until No can reprint it from the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 113
be up to 31 characters. 4. Click OK. When you print from the application, the job will be saved to the hard disk while the specified number of copies prints. For further details on printing additional copies of a Quick Copy job, refer to Printing Additional Copies of Quick Copy Jobs on page 108. 107 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 114
or S key to specify the number of copies. 10. Press the ENTER key. The Quick Copy job initially printed is printed in the specified number of copies. Deleting Quick Copy Jobs 1. Refer to steps 1 through 8 in Printing Additional Copies of Quick Copy Jobs on page 108. 2. If this is the correct job for - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 115
, the number of copies displayed will be one less than the total due to the existing proof copy. The printed jobs will remain saved on the hard disk until the printer is turned off. To delete jobs manually, use the same key operations as explained in Deleting Quick Copy Jobs on page 108. 109 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 116
Job Settings dialog box as indicated in the instructions for Quick Copy on page 107. Select Private Print. 2. Enter four digits with any numbers between 0 and 9 for the Access Code. When you want to print a saved job, enter the access code on the printer operator panel. 3. You can name the job for - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 117
key. Otherwise, press the T or S key until the correct job name appears, then press the ENTER key. 9. Enter the four-digit access code created in Private Print on page 110. 10. Press the Tor S key to increase or decrease the number. 11.Press the W or X key to move the cursor right and left. 12 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 118
Jobs Saved Using Job Storage To print forms and other documents saved using Job Storage, follow the same steps as for Printing Private Print Jobs on page 111. The stored jobs will remain saved even after the printer is switched off. To delete them manually, follow the same steps as for Deleting - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 119
printing and jobs that have not been printed are saved if the printer is switched off. You must create and setup your virtual mailboxes prior to utilizing Mailboxes on page 114. Use the printer driver to select a virtual mailbox for saving a job. Examination department Resort development Sales - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 120
Virtual Mailbox Job Lists • Printing Jobs in Virtual Mailboxes Creating Virtual Mailboxes 1. Click Start in the Windows taskbar, and click Printers and Faxes to open the Printer and Fax window. 2. Right-click the icon for your printer in the Printers and Faxes window. A drop-down list appears - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 121
commas and hyphens to organize multiple mailboxes for the same user. In the following example, when the numbers 1, 3, 6, 8-12 are entered, mailboxes 1, 3, 6, 8, 9, 10, 11, and 12 will be assigned to the name specified in Mailbox Name. Print jobs are saved in those boxes simultaneously. To assign - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 122
Follow the instructions in the previous section to display the Hard Disk Settings of the printer driver that will be the source of the list. Click the Export... button. 2. The Export VMB List dialog box appears. Select save location from the Save in drop- down list. 3. Enter a name in the File name - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 123
Useful Functions 5. The Import VMB List dialog box appears. Select the virtual mailbox data file you wish to read from the Look in drop-down list. 6. Click the virtual mailbox list name and click Open. 7. The virtual mailbox list is - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 124
Mailboxes 1. From the application's Print dialog box, access the Properties. Select Print from the File menu and select Properties. 2. for printing. • Printing the list -- Refer to the next section, Printing Virtual Mailbox Job Lists on page 119. • Printing saved jobs -- Refer to Printing Jobs in - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 125
print a list of jobs saved in virtual mailboxes as a Virtual Mailbox List. The list is printed from the printer operator panel. 1. On the printer list will be printed. The job list information shows the number of saved jobs, number of pages, size, and other specific details for each virtual - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 126
Jobs in Virtual Mailboxes Jobs are printed from the printer's operator panel. 1. On the printer operator panel, press the MENU key. 2. shown below. This menu is not available if all virtual mailboxes are empty. >Print VMB Data Tray 001: Tray 001: Represents Virtual Mailbox 1. 5. Press the ENTER - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 127
on page 106. However, these functions are provided for backward compatibility with printing environments developed KM-NETJob Manager). • Barcode Print Output is supported and facilitates future printing with an optional barcode reader. • Both types of jobs are saved on the hard disk, up to the user - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 128
and Permanent Jobs Check that your printer has an optional hard disk installed. For further details on hard disk settings, refer to RAM Disk Settings on page 20. 1. From the application's Print dialog box, access the Properties. (Select Print from the File menu). 2. Open the Properties dialog box - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 129
and All Programs. Windows 95/98/Me: Click Programs, KYOCERA, and then KM-NET for Clients. 3. Click Add. Depending on your printer connections, select either the Local printer (for Parallel Connection) or Network printer. 4. Follow the wizard through the Starting Add Printing System Wizard dialog box - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 130
and click Finish to return to the main dialog box of the KM- NET for Clients. 6. Select the printer icon displayed in the main dialog box and click Job Manager. Print jobs saved in the printer are displayed. 7. Right-click on the job name and select Print from the drop-down list to print a saved job - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 131
jobs using the optional barcode reader. Use the printer's serial interface to connect the barcode reader to the printer. When initially printing a job, follow the steps below to print a barcode representing the job ID on each page or on the cover page only. {28L016T50} By simply reading the barcode - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 132
table below. Orientations Upper-Right Position Lower-Right Upper-Left Lower-Right Horizontal Vertical When printing, the barcode is printed in the designated position. Reading with the Barcode Reader When the printed job ID is read by the barcode reader, the printer outputs that page. 126 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 133
is read, all pages are printed. • If pages are read individually, only the pages that are read are printed. This feature requires switching the serial interface mode to work with the barcode reader. For further details, refer to the barcode reader's Operation Guide. Barcode Reader Job Code Using the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 134
when printer driver option settings are being set, its icon is displayed in the list on the Profile tab, and it can be shared by each printer. Creating Profiles Follow these steps to create a new profile. 1. From the application's Print dialog box, access the Properties. (Select Print from the File - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 135
-down list. This options enables you to sort icons by color. 7. Enter comments about the settings into the Profile Information Description section. Up to 256 characters can name, and the Profile Information displays the settings and comment. Click Use to activate the displayed printer settings. 129 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 136
Color, and Description of created and shared profiles can be edited. 1. From the application's Print dialog box, access the Properties. (Select Print from the File 's Name, Icon Style, Icon Color, and Description. For further details, refer to Creating Profiles on page 128. 5. Click OK to save the - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 137
it read by other printers. The profiles on several printers can be shared. Print results may vary depending on the printer model. 1. From the application's Print menu, access the Properties. (Select Print from the File menu and select Properties.) 2. In the source printer driver, click the Profile - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 138
. Specify the save location in the Save in drop-down list, enter a name for the file in the File name field, and click Save. Close the Properties dialog box. Read source 5. In the destination printer driver, click the Profile tab in the Properties dialog box. Click Import.... Read Destination 6. The - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 139
want to continue?", there are unusable functions in this profile. Click OK to return to the Profile tab. Read destination The profile read by the printer driver displays in the Profile Selections, and profile reading is - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 140
For further details, refer to step 8 on page 2.The Welcome to the Kyocera Printer Installation Wizard dialog box appears. Click Next. • This function hides the PRESCRIBE command in the document. This allows execution of settings such as printer emulation and foreign characters or overlays. • Insert - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 141
Functions Setting Information You can confirm settings made on the Media, Layout, Imaging, Color, Output, Prologue/ Epilogue, Watermark, and Device Settings tabs. By simply clicking Setting Information... on the Printing Preferences/Properties dialog box, current driver settings can be displayed - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 142
136 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 143
Supported Options Printers Model Enhancement Unit A Paper Feeder B Envelope Feeder Duplex unit FS- 1010 A PF-17 x 1 FS- 1018MFP A PF-17 x 1 FS- 1020D A PF-17 x 1 FS- 1050 A PF-17 x 1 FS- 1118 / KM 1 A PF-17 x 1 A PF-17 x 1 DU-81 Document Finisher None DF-31 DF- 70E/70U DF- 71E/71U DF- 75 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 144
DU-60 DU-81 DU-25 DU-25 DU-30/31 DU-30/31 PD-30 A PF-30 x 3 B EF-1 DU-31 Document Finisher DF-30/31 DF-30/31 DF-31 DF-31 A Face-Down Stacker B Offset Stacker C Face-Up Stacker D Sorter Stacker A -8E D SO-60 B ST-30 D SO-30 B ST-30 D SO-30 B ST-30 D SO-30 B ST-30 D SO-30 Document Processor 138 - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 145
B PF-75 KM-3530 KM-4030 KM-4230 KM-4035 A PF-70 x 2 B PF-70 x 2 or B PF-75 A PF-70 x 2 B PF-70 x 2 or B PF-75 A MD-10 x 2 B MD-10 x 2 B ST-8 A PF-70 x 2 B PF-70 x 2 or B PF-75 KM-4530 KM-5035 A Standard A PF-70 x 2 B PF-70 x 2 or B PF-75 Duplex Unit Job Separator A Inner Finisher B Finisher - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 146
Model KM-5230 KM-5530 KM-6230 KM-6330 KM-7530 KM-C830 KM-C850 Enhancement Unit A Paper Feeder B Optional Feeder A MD-10 x 2 A ST-8 A Standard B ST-11 A MD-10 x 2 A ST-8 B ST-11 A MD-10 x 2 A ST-8 B ST-11 A MD-10 x 2 A ST-8 B ST-11 A PF-30A B PF-30A A PF-30A B PF-30A Duplex Unit Standard Standard - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 147
- Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 148
©2005 is a trademark of Kyocera Corporation - Kyocera FS-3750 | Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 149
Rev. 1.4 2006.1
Kyocera Extended Driver
User Guide