Kyocera FS-3900DN IB-23 User's Manual in PDF Format
Kyocera FS-3900DN - B/W Laser Printer Manual
 |
UPC - 674983006900
View all Kyocera FS-3900DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-3900DN manual content summary:
- Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 1
Kyocera Mita printers and digital copiers to communicate over an Ethernet network with many different network operating systems, including Windows, NetWare, Macintosh, and UNIX. This manual provides full instructions on software configuration instructions device, pursuant to Part 15 of the FCC - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 2
cables when connecting to this device. Changes or modifications not expressly approved by Kyocera Mita could void the user's authority to operate this equipment. Refer to the manual for specifications on cabling types. Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\frontend.htm 2006 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 3
IB-23 Configuration Guide IB-23 User's Manual GETTING STARTED Preface Product Specifications INSTALLATION IB-23 Network Card IP Address Configuration Utilities Printer Drivers PRINTING SETUP Windows - TCP/IP Windows - NetBEUI Windows Printing via E-mail NetWare Macintosh Unix MANAGEMENT Security - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 4
call Printer interface Indicators Operating system Network protocols Operating conditions Storage conditions EMI conformity IB-23 32-bit RISC 8 MBytes+2 MBytes flash 10 Base-T/100 Base-TX Kyocera Mita Universal IO slot (KUIO-LV), 3.3V, DMA See the diagram below. Windows 98/Me, Windows NT 4.0/2000/XP - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 5
connected to a 10 Mbps network. 3. 100BaseTX Indicator lights when connected to a 100 Mbps network. 4. Status Indicator lights while receiving and transmitting data. 2/2 ページ Top of page Figure 1. Ports and Indicators file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\product_infor... 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 6
body before touching the interface card. Hold the IB-23 only by the metal connector plate. The instructions below describe the installation of the IB-23 into a typical Kyocera Mita printer and are similar to all Kyocera Mita printers and digital copiers that are incorporated with the standard KUIO - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 7
IB-23 4. Connect the network cable to the interface card using a twisted pair cable for the 10/100baseT connector. 5. Plug the power cable to the printer inlet. Turn printer power on. Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\install_NIC.htm 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 8
Setup „ Using RARP or BOOTP „ Using ARP „ Using the Printer's Operator Panel After following the procedures in this section to configure the permanent address reservation. Unlimited Lease or Address Reservation in Windows NT 4.0 and Windows 2000 In Windows NT 4.0 and 2000, lease duration is set for - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 9
power on. The printer receives the IP address from the DHCP server. You can print the network status page to confirm the IP address. Verifying the Active Lease Status You can verify active leases for a particular scope by opening the Active Leases windows: „ From the Scope menu, select Active - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 10
Service) is used by Windows NT to provide a mechanism for mapping the NetBIOS name, commonly referred to as 'host name,' to an IP address. WINS requires a Windows NT 4.0/2000/Server2003 to be configured as a WINS server. WINS enables defining a printing configuration which references the printer - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 11
the IB-23) to configure the IP address in the IB-23. Follow these steps to set up a fixed IP address. 1. Launch Quick Setup. „ For instructions on launching Quick Setup, refer to the section on installing the utilities. 2. From the Quick Setup list screen, select the IB-23 to configure and - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 12
IP Address Configuration 5/9 ページ Figure 4. Quick Setup List Screen 3. In IP Address, Subnet mask, and Default gateway, enter the information obtained from the network administrator. Click Next. Figure 5. Quick Setup TCP/IP Settings Screen 4. A confirmation screen is displayed. Confirm the settings - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 13
Confirmation Screen Using RARP or BOOTP You can resolve the IP address via RARP or BOOTP over the Ethernet connection. The host computer must support either protocol as the boot server. The address information will be stored in a configuration file on the server as, for example, ethers or bootptab - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 14
a web browser. Using ARP ARP is available for resolving IP addresses both in Windows and UNIX networks. The IP information can be set by registering it in the the following example: arp -s 192.168.1.2 00:c0:ee:14:00:87 temp In Windows, at the DOS prompt: arp -s 192.168.1.2 00-c0-ee-14-00-87 This - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 15
to virtually all Kyocera Mita printers except those having no operator panel. For digital copier operator panel setting instructions, refer to the operation manual. To set useful during diagnostics on network problems. file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\tcpip_setting.h... 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 16
IP Address Configuration To print a network status page, refer to the printer's manual. Top of page 9/9 ページ file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\tcpip_setting.h... 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 17
ROM is for use in the following environments: „ Windows 98/Me „ Windows NT 4.0/2000/XP/Server2003 About the CD-ROM Inserting the CD-ROM port in Windows to enable printing via peer-to-peer communication. This utility is installed on the hard disk. Displays the operating guide (this manual) for - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 18
Installing the Software Utilities 2/2 ページ View Setup Guide Displays a manual that describes the basic setup when you the wizard instructions to complete the installation. Launching KPrint To run KPrint, from the Windows Start menu, go to All Programs > Kyocera. Click KPrint Add Port. Top of page - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 19
. You can also download and install the latest printer drivers from www.kyoceramita.com. Installing Printer Drivers 1. Insert the Software Library CD-ROM in the CD-ROM drive. „ After a while, the Main Menu screen is displayed. Click Exit to close the main menu. 2. From the Windows Start menu, go - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 20
Installing the Printer Drivers 2/6 ページ Figure 2. Selection of Local or Network Printer 4. The screen for printer port selection is displayed. Choose Create a new port. In Type of port, select KPrint Port from the dropdown menu and click Next. Figure 3. Printer Port Selection file://F:\USERMAN\ - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 21
Installing the Printer Drivers 3/6 ページ 5. The KPrint Add Port Wizard is displayed. Select the mode Input in the KPrint Add Port Wizard 7. The port name of the destination printer is displayed. Confirm the name and click Next. file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\install_printer_... 2006 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 22
Installing the Printer Drivers 4/6 ページ Figure 6. The Destination Printer Port Screen in the KPrint Add Port Wizard 8. Confirm the information and click Finish. Figure 7. Confirmation Screen in the KPrint Add Port Wizard 9. After the printer software installation screen is displayed, click Have - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 23
Installing the Printer Drivers 5/6 ページ Figure 8. Printer Software Installation Screen 10. After the printer drivers on the CD-ROM are listed, select the model of your printer and click Next. 11. In the screen for naming the printer, make sure the model name is displayed in the printer name field - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 24
Installing the Printer Drivers 6/6 ページ Figure 9. Completing the Add Printer Wizard „ After the printer driver is installed, a message to restart your computer may be displayed depending on the operating system. In this case, follow the instructions and restart your computer. Top of page file - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 25
. This section covers the following topics: „ Which Print Method to Use? „ Configuring the PC for TCP/IP „ Creating a KPrint Port for TCP/IP Printing „ Installing the Printer in Windows 98/Me Microsoft Windows encompasses a wide range of client versions; from Windows 98 to Windows XP, and thus - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 26
For details on installing network services and protocols in Windows, refer to the Windows documentation or Help. „ You Port is a printer port you create in Windows to print from the printer driver to the network card wizard by selecting Windows Start, All Programs, and Kyocera, and clicking KPrint - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 27
Windows Printing: TCP/IP 3/4 ページ Figure 2. Specifying IP Address for the Port 4. Click Next. Destination printer port name is displayed. file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\windows_printi... 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 28
/IP Printing. 1. If you have not already done so, install the printer driver for the printer. For details, see Installing the Printer Drivers. 2. Select Windows Start, Settings, and Printers. 3. In the Printers folder, right click the printer driver that will be used to print to the TCP/IP port and - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 29
to install the IB-23 in the Windows NetBEUI environment. The IB-23 supports master-browsing in Windows Network Neighborhood. Once the IB-23 is physically installed in the printer and connected to the network, the IB-23 will create a Windows workgroup called KM-NetPrinters in Network Neighborhood, or - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 30
protocol or service. You will have to have the Microsoft Windows installation CD. Setting Up NetBEUI Printing Once your PC has been configured to support the NetBEUI protocol, you are ready to connect the PC to the printer. This is done by installing the printer driver for the NetBEUI printer in the - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 31
Windows Printing: NetBEUI 3/5 ページ Figure 2. Printer Workgroup Created in Entire Network 3. Double click the KM-NetPrinters workgroup. You will find the IB-23 running the NetBEUI protocol. Format for the default NetBEUI printer name is the last six letters of its MAC address prefixed by 'Km.' If - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 32
> TCP/IP > General) are interrelated. If you want to change the NetBEUI printer name, change the TCP/IP host name as well. The printing workgroup is a workgroup shown in Entire Network in My Network. The default workgroup name is "KM-NetPrinters." You can enter a comment as desired. This field - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 33
Windows Printing: NetBEUI 6. Click Submit, and the settings are complete. Top of page 5/5 ページ file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\windows_printi... 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 34
the shared printer using only the Windows Add Printer wizard and printer (e.g. [email protected]) „ POP3 mail server address (e.g. 130.21.222.56) „ Account name to login to the mail server (e.g. widgets.com/pusr/fs6950) „ Password to login to the mail server Activate and Configure POP3 By default - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 35
in minutes that the IB-23 will check the mail server for e-mail. The default is 15 minutes. The minimum interval is 3 minutes. 6. Click User 1 . User 1 Click On. E-mail address Enter the e-mail address for the printer, e.g. [email protected]. POP3 Server Name Enter the IP address or the - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 36
, and the main menu is displayed. 2. Click Install KPrint Software. 3. Follow the wizard instructions to complete the installation. Run the KPrint Add Port wizard by selecting Windows Start>All Programs>Kyocera, then click KPrint Add Port. file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\email.htm - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 37
Name Sender Address SMTP Server Enter the name of the person that will be sending print jobs. The Sender Name will appea the print job cover page. Enter the e-mail address of the person that will be sending print jobs. Enter the IP address or the host name for the SMTP - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 38
Name is displayed in the Windows port list. Select the Display the print job cover page dialog checkbox to enable the cover page dialog. ! Note: The cover page dialog also allows changing the destination printer or sending the job to multiple printers. ! Note: If the cover page has been disabled on - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 39
Authentication and enter an authorized user name and password. Split into multiple e- Splitting into multiple e- printer driver from the CD-ROM supplied with the printer. For details, refer to Installing the Printer Drivers. To connect the printer to the e-mail port: 1. Open the Windows Printers - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 40
E-mail Printing 7/11 ページ Figure 6. Windows Printers folder 2. Right click the printer and select Properties from the pull down menu. The Properties dialog will open. In the Port tab, select the e-mail port. An e-mail port can - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 41
E-mail Printing 8/11 ページ Figure 7. Printer Properties dialog 3. Click on Configure Port to open the KPrint Port configuration dialog. Figure 8. Port Configuration file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\email.htm 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 42
Server, and the Cover Page and Return Receipts check boxes. 5. Click on the Advanced tab. Figure 9. Advanced Port Configuration 6. Adjust the SMTP Authentication, Split into multiple e-mails when larger than this value, and Character Code settings as necessary. Click OK. The printer is connected to - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 43
is also printed on the cover page. If Set as default configuration is checked, then the changes to the Cover Page dialog w saved and used for subsequent print jobs. The Printing System E-mail Address may be modified to send the print job to a differen printer. Enter multiple Printing System E-mail - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 44
discarded. Note: If the printer you are using does not support KPDL emulation, you cannot print cover page. A cover page will be printed only if Cover Page is Enabled on the POP3 page (see Figure 1). 3. Attach the file to print as an attachment (must be .txt, .ps, .prn, or .pdf). 4. Click Send. Top - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 45
browser to set up NetWare server mode on the IB-23. The instructions are designed assuming that the NetWare print queue already exists. To create -23 with a Web Browser „ Setting Up Print Server Mode „ Setting Up Remote Printer Mode „ Sending Jobs to the Print Queue Accessing the IB-23 with a Web - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 46
use. The parameters that apply to both print server mode and remote printer mode are as follows. NetWare Protocol Bindery Mode Frame Type NDS Tree whether bindery mode is enabled (On) or disabled (Off). Choose from four supported four frame types: 802.2, SNAP, ETHERNET-II, and 802.3. You can also - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 47
Banner Page Requests Password (Optional) Choose printer port of the printer driver. If no printer driver is installed, follow these steps to install one. 1. On the Windows desktop, double-click on My Network Places. 2. Double-click on Entire Network. 3. Double-click on the Novell Directory Services - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 48
NetWare Printing 4/4 ページ Figure 2. Installing Printer Drivers 6. After the Windows Add Printer Wizard is displayed, follow the instructions to install the printer driver. 7. After the printer driver is installed, click Finish. Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\ - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 49
for use in a Macintosh environment. The IB-23 supports Mac OS 8.x and 10.x and is compatible with LaserWriter printer driver version 8.x. „ Setting KPDL (PostScript) Emulation „ Activating AppleTalk „ Configuring Printers Setting KPDL (PostScript) Emulation Macintosh environments use the PostScript - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 50
asterisk (*) here indicates the default zone. 6. Click Submit, when the settings are complete. Configuring Printers To configure a printer in a Macintosh environment, in the method described above, associate the standard Mac OS LaserWriter 8 driver for the printer installed on an AppleTalk network - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 51
-click to open it. Figure 2. Chooser Settings 4. Click the LaserWriter 8 driver. 5. Select the printer's AppleTalk zone. The AppleTalk printers of the zone are listed in the window at right. 6. Click the installed printer. 7. Click Create. The PPD file is selected automatically, and a settings - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 52
sales820ptr #Kyocera Mita FS-2000D Printer 3. Using the ping command, confirm the name resolution. # ping sales820ptr If there is no response, try pinging the IP address to verify the network connection. If the IP address can be pinged but not the name, then there is a problem - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 53
name or # lpadmin -p sales820q -o nobanner The banner page default may also be changed by editing the interface file in / in Solaris 2.5x and earlier versions. The instructions below are for Solaris 2.4. The commands and upon the OS version. A Remote Printer cannot be configured in OpenWindows using - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 54
Job, and Checking Status section. HP-UX 9.x and 10.x Setup The instructions below are for HP-UX 9.03. The commands and paths listed in the #/usr/lib/lpshut 3. Add the following line to the /etc/inetd.conf file. printer stream tcp nowait root /usr/lib/rlpdaemon -i 4. Restart inetd. #/etc/inetd -c - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 55
a Job, and Checking Status section. IBM AIX 4.x.x Setup The instructions below are for AIX 4.1.5. The commands and paths listed in the on remote server TYPE of print spooler on remote server DESCRIPTION of printer on remote server Entry sales820q sales820ptr lp1 BSD [comments] Printing, Canceling - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 56
Printing 5/8 ページ BSD UNIX Setup The instructions below are for SunOS 4.1.3. The commands and remote printer; use the IB-23 logical port name of lp1. :sd=/usr/spool/sales820q:\ sd= spool directory and path :lf=/usr/spool/sales820q/sales820q_errs: lf= error log file and path 3. Create the Error Log - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 57
, Canceling a Job, and Checking Status The commands for these functions are common to all the versions of UNIX covered in this manual except BSD UNIX. The BSD UNIX section covers these topics separately. Printing The lp command is used for printing. For details on lp command options, please refer - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 58
transfer print files generated by a printer driver. ASCII mode is used to transfer text based files and automatically converts LF (linefeed) codes to CR+LF (carriage return, linefeed) codes. If no transfer mode is specified, then ASCII mode is used as the default. The following example sets BINARY - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 59
Unix Printing 8/8 ページ 5. Close the ftp session. ftp>quit Confirming ftp Connection Status The quote command 192.168.30.161 User logged in: guest Transfer type: BINARY Data connection:Closed. 211 End of status. ftp> Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\unix.htm 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 60
: If you forget the administrator password, following the instructions given in Resetting to Factory Defaults to restore the factory default settings and clear the password. 1. In the web browser address bar, enter the printer's IP address to display the printer webpage. 2. Click the Basic tab - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 61
only authorized addresses access to specific protocols. For example, an IP filter could be set for HTTP so only specific addresses could access the printer's HTML web pages. You can enter valid IP address ranges up to 16 access lists. The following protocols can be designated for individual IP - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 62
web browser. 1. In the web browser address bar, enter the printer's IP address to display the printer webpage. 2. Click the Advanced tab. The webpage for TCP/IP IB-23 using a web browser. Encryption is turned off in the factory default settings. Encryption can be turned on using the built-in IB-23 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 63
encryption can also be created using the built-in IB-23 web pages. This can be used in applications where there is a limit on the printer usage, because the certificate can be given an expiration date. The certificate is a print server certificate, and does not place any restrictions on clients. Use - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 64
Figure 4. The certificate settings page Secure Network Printing Settings in Windows On Windows 2000/XP/Server 2003, the path to the printer that the IB-23 is installed in can be configured using the IPP client that is included with Windows. This allows the print data to be encrypted before being - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 65
or on a home or office network and then enter the URL of the printer in the format https://(Printer IP Address)/ipp/(lp). Figure 6. The Specify a Printer Screen 5. Click Next. 6. The screen to search for and install the printer driver is displayed. Follow the on-screen directions to install the file - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 66
Security 7/7 ページ printer driver. Secure Connections from a Web Browser To use a secure connection to access the built-in web Allow firmware updates via the update utility (IBVERUP) on the account settings page. Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\security.htm 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 67
accessing the COMMAND CENTER. „ Your computer must support TCP/IP. „ The IB-23's IP address must be configured. 1-1. Compatible Systems The COMMAND CENTER can be used with these operating systems. „ Microsoft Windows 98SE/Me/2000/XP/Server2003, and Microsoft Windows NT 4.0 „ Apple Macintosh OS X 10 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 68
default, security, and basic network settings. This section describes settings applicable to the printer's printing functions, as well as settings for sending print data to the printer 23 network settings „ Access the Kyocera Mita website 2-1. Home Page file://F:\USERMAN\EXPORT\Option\IB-23\P6 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 69
of the COMMAND CENTER. Choose the desired language from the drop down list. Displays the printer status on the operation panel. To update the information, click the Refresh button. Shows roughly how much toner is left. For checking the IP address, host name, sysUpTime, MAC address, system and engine - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 70
the Printer Page. 2-3. Information Page You can check Contact Information settings, as well as the model name and firmware version of the IB-23. Page Description Start > Information pages> Contacts This page can be customized to display contact information for the dealer or service center - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 71
for driver downloads. Click this link to access the Kyocera Mita website. 3. Basic Page From this page, you can configure settings applicable to all aspects of IB-23 operation, such as Security and Network settings. You can restrict access to this page by setting an administrator password. Refer - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 72
on and off. Sets the capacity of the RAM Disk in the printer. 3-2. Security You can restrict access from the COMMAND CENTER to various pages (except the Start page) by setting an administrator password. Note: „ By default, no administrator password is set. We recommend setting an administrator - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 73
the desired password in the new password field. 3. Re-enter the same password in the manually starts with 192 to 254, use 255.255.255.0 as the subnet mask. For designating the IP address of the default be able to add printers through Print Center in Mac OS X. Printers must support KPDL for printing. - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 74
well as settings for sending print data to the printer. You can restrict access to this page by setting an administrator password. Refer to Security on the basic settings page for details. Figure 3. COMMAND CENTER Printer Page 4-1. Defaults > System file://F:\USERMAN\EXPORT\Option\IB-23\P6 English - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 75
Kyocera Image Refinement (KIR) can be switched on and off. EcoPrint can be used to conserve toner and reduce printing costs. This feature can be switched on and off. By default . Refer to the instruction manual of the printer for details on each of the parameters. 4-5. Defaults > FRPO Parameters > - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 76
the extensions *.ps, *.prn, *.pdf, and *.txt are supported. For PostScript and PDF files, set the printer emulation to KPDL or KPDL (AUTO). Enter the text for You can restrict access to this page by setting an administrator password. Refer to 3-2. Security for details. Figure 4. COMMAND CENTER - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 77
manually starts with 192 to 254, use 255.255.255.0 as the subnet mask. Default Gateway For designating the IP address of the default able to add printers through Print Center in Mac OS X. Printers must support KPDL for printing. the scope of IP addresses the Windows server can assign or lease. FTP - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 78
to send a control code after printing, designate that string. Banner page printing can be enabled (On) or disabled (Off) when printing via FTP or LPD. 5-4. Protocols > NetWare > General This print system supports both NDS and bindery printing in either printer server mode or remote printer mode. To - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 79
zone (network). An asterisk (*) here indicates the default zone. 5-7. Protocols > NetBEUI/NetBIOS Print systems connected via NetBEUI are registered in Windows in My Network. Item NetBEUI Protocol NetBIOS over TCP/IP Browse Master Printer Name Workgroup Comment Description Choose whether NetBEUI - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 80
login user name and login password will be used. If supports variable strings such as "%printer" (the model name) and "%serial" (the serial number). Enter an e-mail signature. 5-9. Management/E-mail > SMTP > E-mail Recipient (1-3) Status information, such as notification of errors or that the toner - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 81
Number Login User Name Login Password Use APOP Delete e-mail after retrieval E-mail Size Limit Filter Setting Cover Page Description Choose On or (Off). Enable this setting (On) when connecting to mail servers that support APOP. Choose whether or not to delete messages from the server after they - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 82
The IPX address that receives traps. Select the events that generate traps from Low Toner, Add Toner, Paper Jam, Add Paper, Cover Open, and All Other Errors. 5-14. Management/E-mail > Maintenance A printer maintenance request mail can be sent periodically to a specified address. Item Equipment ID - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 83
last day of the month. Click the Send button to immediately send maintenance notifications to the mail addresses specified in the recipient addresses without waiting code Enter a two character code that represents the country (region) where the user resides. Examples: Japan = JP, United States - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 84
up to 31 single-byte characters. 6. Troubleshooting If problems occur when using the COMMAND CENTER, investigate the following items and take the appropriate action. If the problem persists, contact your dealer or an authorized service center. Problem Cannot access the COMMAND CENTER Check point - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 85
desired settings of IB-23, click the Submit button. The administrator password can be cleared by restoring the IB-23 settings to the factory default settings using the procedure described in Resetting to Factory Defaults. Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\card_homepag - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 86
E-mail Reports via SMTP (Simple Mail Transfer Protocol) The IB-23 SMTP support enables the printer to send a variety of error and status reports via e-mail to selected recipients. This section covers the following topics: Configure the SMTP Connection Establish Connection to the SMTP Server Define - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 87
1. Enable the SMTP Protocol. 2. Set the SMTP Port Number or use the SMTP default port 25. 3. In SMTP Server Name, enter the server name or IP address. for the printer, such as the printer administrator, so that a reply or non-delivery report will go to a person rather than to the printer. 2. Enter - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 88
mails from this printer would have the following subject line, "Reports from FS-6950DN Page Printer". 3. Enter The printer uses an internal POP3 mail client to send e-mail. By default, Exchange e-mail messages) to use the login name and password designated on the POP3 page for SMTP authentication. - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 89
the following sections for descriptions of the various report types: Error Notification Scheduled Reports Error Notification The printer can be configured to send e-mail notifications whenever any error conditions occur. Setup error notification after configuring the SMTP connection. 1. On the SMTP - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 90
. 4. In Scheduled Report Interval, choose to send reports monthly, weekly, daily, or hourly. !Note:Monthly, weekly, and daily options are only valid when the printer has access to a network time server. The current time can be set from the Basic tab of the COMMAND CENTER, in Time. file://F:\USERMAN - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 91
Scheduled Reports Information on the items you select in Scheduled Report Items will be sent to you as an e-mail attachment following the schedule report. Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\smtp.htm 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 92
protocol is installed on the PC from which you want to manage the IB-23 via SNMP. „ The IB-23 is physically installed and the printer is powered on. „ The IP address has been configured properly for the IB-23. Configuring SNMP To configure the SNMP settings, you can use a web - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 93
-byte characters. Enter the password for encryption. Enter between 8 and 32 single-byte characters. SNMPv1/v2c can be set to enabled (On), Read Only, or disabled (Off). Turn SNMPv3 off if this setting is set to On. This is used to read device information.The default read community string is file - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 94
traps. The IPX address that receives traps. Select the events that generate traps from Low Toner, Add Toner, Paper Jam, Add Paper, Cover Open, and All Other Errors. 9. Click Submit to complete the configuration. Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\SNMP.htm 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 95
IB-23 within an organization, such as IP filters, Contact info, Logical Printers, etc. With a web browser these settings would need to be made individually of the IB-23 settings. The Windows XP ftp command line is used in this example, however, any OS that supports command line ftp may be used. - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 96
shows that there is now a file in the current directory called config. ;;; General ;;; ;Admin Password Firmware Update Utility LAN Interface = "*****" = ENABLE = AUTO ;;; TCP/IP ;;; TCP/IP Protocol Host Name IP Address Subnet Mask Default Gateway DHCP BOOTP RARP ARP/PING Bonjour Bonjour Name FTP - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 97
is not written to the config file for security reasons, however, the Admin password can be set using the config file by eliminating the semicolon and entering a password string, for example: Admin Password = "mypassword" Step 2 - Modify the Configuration File All but the desired IP Filter settings - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 98
, but still requires manually connecting to each target IB-23. The following procedure shows how to automate sending the config file to a group of printers when using Windows. This procedure requires that all IB-23 have the same Admin password. 1. Create an ftp command file called IB23set.txt with - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 99
to send a config file with new settings to all IB-23 in the batch file and determine any failures by viewing the log.txt file. Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\ftp.htm 2006/05/26 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 100
Troubleshooting 1/4 ページ Troubleshooting This section provides troubleshooting for common problems you may encounter while setting up and using the IB-23. Visit the following web site for more information and downloads. http://www.kyoceramita.com/ General I cannot print to my printer over the - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 101
an administrator password. To change the password from a errors when the IB-23 is receiving multiple print jobs. „ In network environments supporting TCP/IP, create the KPrint Port for the printer connection and use peer-to-peer printing. For instructions on creating the KPrint Port, refer to Windows - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 102
Troubleshooting 3/4 ページ End of Job String field. To access the End of Job String in the browser: 1. Connect to the IB-23 home page, e.g. http://192.168.40.17 2. Select Printer Control and enter the following command in the End of Job String: \x04 Resetting to Factory Defaults How can I reset all - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 103
23 from the printer. 9. Remove the jumper from SW2 and reset it to the normal position as shown in Figure 1 above. 10. Insert the IB-23 in the printer. The above procedure reinitializes all of the IB-23 settings. Top of page file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\troubleshoot.... 2006/05 - Kyocera FS-3900DN | IB-23 User's Manual in PDF Format - Page 104
Copyright IB-23 User's Manual Version 1.0 Copyright ©2006 KYOCERA MITA Corporation 1/1 ページ file://F:\USERMAN\EXPORT\Option\IB-23\P6 English\cpyright_E.htm 2006/05/26
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
 |
 |
Preface
Thank you for choosing the award winning Kyocera network printing products. We are sure you will appreciate the high
performance and low cost of ownership that are the hallmarks of Kyocera printing products.
The IB-23 is a Kyocera internal network interface card which may be easily installed without removing the printer main
board.
The IB-23 enables Kyocera Mita printers and digital copiers to communicate over an Ethernet network with many
different network operating systems, including Windows, NetWare, Macintosh, and UNIX.
This manual provides full instructions on software configuration instructions allowing an experienced system administrator
to get the IB-23 up and running quickly. For more concise instructions, refer to the printed IB-2x Quick Configuration
Guide.
Trademarks
Kyocera® and Kyocera Mita® are registered trademarks of Kyocera Corporation. NetWare® is a registered trademark of
Novell, Incorporated. Windows® is a registered trademark of Microsoft Corporation. Macintosh® and AppleTalk are
registered trademarks of Apple Computer, Incorporated. PostScript® and Acrobat® are registered trademarks of Adobe
Systems, Incorporated. All other products referenced are trademarks or registered trademarks of their respective
companies.
FCC Notice
This equipment complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
1.
this device may not cause harmful interference, and
2.
this device must accept any interference received, including interference that may cause undesired operation.
WARNING:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules, and the Canadian Department of Communications Equipment Standards entitled, Digital Apparatus, ICES-
003. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Reorient or relocate the receiving antenna.
IB-23
Network Card
User's Manual
Kyocera Mita Corporation
2-28, 1-Chome, Tamatsukuri, Chuo-ku
Osaka, Japan 540-8585
1/2 ページ
Preface
2006/05/26
file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\frontend.htm