Kyocera FS-C1020MFP FS-C1020MFP Quick Operation Guide - Page 34
Print Cartridges - driver
View all Kyocera FS-C1020MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Print Cartridges Replacing Print Cartridges • When removing print cartridges, be careful not to touch the Laser Scanning Unit on the underside of the upper cover (the white area in the illustration). BPC221S • If cyan, magenta, or yellow toner runs out, you can print in black and white using just the black toner. Change the color mode setting to Black and White using the machine's driver. • If black toner runs out, you cannot print in black and white or color until the black print cartridge is replaced. Pull up the lever on the top cover, and then carefully raise the top cover. Make sure that the exposure glass cover or ADF is closed. BPC222S Tilt the print cartridge forward and pull it out. • Do not shake the removed print cartridge. Doing so can cause remaining toner to leak. • Place the old print cartridge on paper or similar material to avoid dirtying your BPC223S workspace. • The toner color is indicated by the label on each print cartridge. 34