Kyocera KM-1820 1820 Operation Guide (Advanced Edition) - Page 103

Advanced Advanced > Protocols > TCP/IP > General - password reset

Get Kyocera KM-1820 PDF manuals and user guides View all Kyocera KM-1820 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

Using COMMAND CENTER Advanced Page This section includes advanced settings that apply to the machine and is comprised primarily of advanced network settings. Pages in this section are available only to the Administrator (if the Admin password has been set). NOTE: Always restart this machine after you have completed these settings in order to properly register the content of those settings in the machine. Refer to Basic > Reset on page 8-9. Advanced > Protocols > TCP/IP > General The table below provides a summary of the items displayed on the Printer System page. Item Description Host Name Specifies a name for the printing system network component. This name is also used as the NetBEUI Printer Name and the SNMP sysName object. IP Address Assigns the Internet Protocol address on the printing system network component. Format of the IP Address is four-byte (32-bit) numbers separated by dots, e.g. 192.168.110.171. Subnet Mask Specifies the subnet mask configured on the printing system network component. If the printing system does not automatically assign a usable default value and the first number in the IP address above is from 192 to 254, then use 255.255.255.0 as the subnet mask. Default Gateway The IP address of the gateway router for the local network. DHCP/BOOTP, Identifies how the machine obtains its IP configuration: DHCP/BOOTP: automatic configuration via a BOOTP server or a DHCP server. RARP Automatic configuration using the Reverse Address Resolution Protocol. ARP/PING Automatic configuration using the Address Resolution Protocol and PING to identify whether an IP Address is live. DNS Server (Primary, The IP address of the primary and secondary Domain Name System (DNS) Secondary) servers. Domain Name The Domain Name System (DNS) name of the domain which the printing system belongs, such as kyoceramita.com. It should not include the host printer name. WINS Server (Primary, The IP address of the primary and secondary Windows Internet Name Service Secondary) (WINS) servers. Scope ID This section determines the scope of IP addresses that a Windows server can grant or lease to any requesting network component. A DHCP server processes the printing system's discovery broadcasts and returns an IP address to it. The DHCP server may be set up to grant an IP address for a limited time (a temporary lease) or for an unlimited time (an unlimited lease), or it may be configured with a permanent address reservation for the printing system. FTP Status Check Enables or disables the FTP Status Check. 8-18 ADVANCED OPERATION GUIDE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
Using COMMAND CENTER
8-18
ADVANCED OPERATION GUIDE
Advanced Page
This section includes advanced settings that apply to the machine and is comprised
primarily of advanced network settings. Pages in this section are available only to the
Administrator (if the Admin password has been set).
NOTE:
Always restart this machine after you have completed these settings in
order to properly register the content of those settings in the machine. Refer to
Basic > Reset on page 8-9
.
Advanced > Protocols > TCP/IP > General
The table below provides a summary of the items displayed on the Printer System
page.
Item
Description
Host Name
Specifies a name for the printing system network component. This name is also
used as the NetBEUI Printer Name and the SNMP sysName object.
IP Address
Assigns the Internet Protocol address on the printing system network
component. Format of the IP Address is four-byte (32-bit) numbers separated by
dots, e.g.
192.168.110.171.
Subnet Mask
Specifies the subnet mask configured on the printing system network component.
If the printing system does not automatically assign a usable default value and
the first number in the IP address above is from 192 to 254, then use
255.255.255.0 as the subnet mask.
Default Gateway
The IP address of the gateway router for the local network.
DHCP/BOOTP,
Identifies how the machine obtains its IP configuration: DHCP/BOOTP: automatic
configuration via a BOOTP server or a DHCP server.
RARP
Automatic configuration using the Reverse Address Resolution Protocol.
ARP/PING
Automatic configuration using the Address Resolution Protocol and PING to
identify whether an IP Address is live.
DNS Server (Primary,
Secondary)
The IP address of the primary and secondary Domain Name System (DNS)
servers.
Domain Name
The Domain Name System (DNS) name of the domain which the printing system
belongs, such as
kyoceramita.com.
It should not include the host printer name.
WINS Server (Primary,
Secondary)
The IP address of the primary and secondary Windows Internet Name Service
(WINS) servers.
Scope ID
This section determines the scope of IP addresses that a Windows server can
grant or lease to any requesting network component. A DHCP server processes
the printing system’s discovery broadcasts and returns an IP address to it. The
DHCP server may be set up to grant an IP address for a limited time (a
temporary lease) or for an unlimited time (an unlimited lease), or it may be
configured with a permanent address reservation for the printing system.
FTP Status Check
Enables or disables the FTP Status Check.