Kyocera KM-1820 1820 Operation Guide (Basic Edition) Rev-1.1 - Page 37
Preparations, Connecting the Cables, Connecting the Network Cable, Connecting the Parallel or USB
View all Kyocera KM-1820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3 Preparations Connecting the Cables The machine can be connected to a network or directly to a computer. Connecting the Network Cable When connecting the machine to the network, use the appropriate network cable (10BASE-T or 100BASE-TX). 1 Turn the machine off, and remove the power cord from the outlet. 2 Connect the network cable to the network interface connector at the rear side of the machine. 3 Connect the other end of the network cable to your network device. 4 Make network settings on the operation panel - refer to Network Settings on page 3- 4. Connecting the Parallel or USB Cable To connect the machine directly to your computer, use either a parallel cable or USB cable. For details refer to the Advanced Operation Guide. 1 Turn the machine off, remove the power cord from the outlet and turn the computer off. OPERATION GUIDE 3-1