Kyocera KM-2560 IB-40 User Guide

IPv6-IPv4 Converter IB-40

Installation Guidance

Thank you for purchasing IPv6-IPv4 Converter, IB-40 (below, "this

product").

This product is a protocol converter that allows an IPv4 MFP to be

used on IPv6 networks. Once an IPv4 MFP is connected to this

product, specifying the environmental settings will allow IPv6

network devices to access the MFP.

This document describes the basic information about this product and

the preparation that needs to be completed before it is set up.

Safety instructions

To ensure safe and proper use, please read the following information carefully

before using this product. The safety instructions include important

information on safe handling of the product and on general safety issues.

Be sure to read these instructions before using the product.

"Danger" indicates the existence of a hazard that could result in bodily injury

if the safety instruction is not observed.

- Do not allow physical impact: When damaged, turn off the MFP main unit,

unplug it from the power outlet and contact your point of purchase. Failure

to take this action could cause fire or an electrical shock.

- If this product becomes hot, or you smell smoke, turn off the MFP main unit,

disconnect the power plug from this product, and then unplug the power

cable from electric outlet immediately. If a foreign object (liquid, metal, etc.)

gets into this product, turn off the MFP main unit, disconnect the power

plug from this product, and then unplug the power cable from electric

outlet immediately.

- Failure to take this action could cause fire or an electrical shock.

- Contact your point of purchase about repairing this product.

- Keep the cord and cables away from children. They may be injured or

receive a shock.

- If MFP main unit has a ground wire, it must be used to prevent

electrocution and power surges.

- Do not disassemble or modify this product. Contact your point of

purchase about repairing this product.

"Warning" indicates the existence of a hazard that could result in material

damage if the safety instruction is not observed.

- When unplugging the MFP main unit, do not pull on the power cord. This

could damage the cord and result in a fire and/or electrical shock. Pull only

on the plug.

- When moving this product, always unplug the MFP main unit from the power

outlet beforehand. Failure to do so could result in fire or electric shock may occur.

- Verify all cables are properly and safely before using this product.

- When the product will not be used for an extended time, unplug the MFP

main unit power cable.

- Do not use or store this product under the following conditions to avoid

potential damage to this product.

[Prohibited]

- Hard vibrations

- Tilted or unstable places

- Exposure to the direct rays of the sun

- Humid or dusty places

- Wet place (kitchen or bathroom)

- Heated places (near stove or heater)

- Wide temperature change

- Strong electromagnetic field (near magnet, radio or wireless

device)

[ Danger ]

[ Warning ]

Notes on using this product

List of compatible protocols

Our company assures that this product works without any problems for

the following protocols.

Other protocols may also be compatible if they are application layer

protocols that use the same communication method for IPv4 and IPv6.

TCP: telnet(#23), http(#80), LPR(#515), IPP(#631), RAW mode

print(#9100), SMTP(#25)*, POP(#162)*, SMB(#445)*, FTP-

Server(#21), FTP-Client(#21)*

UDP: SNMP(#161), SNMP-Trap(#162)*, DNS(#53)

* When using a protocol marked with "*", the IPv6 address of the

destination device needs to be registered in the Conversion

Address List.

List of incompatible protocols

Protocols applicable to the following conditions cannot be used for

IPv6 communication via this product.

- Application layer protocols that include an IP address in the

communication data (e.g. SIP)

*Except for the compatible protocols above

- Protocols that have a different structure for the communication data

and method for IPv4 and IPv6 (protocols such as DHCP that have

different communication specifications for IPv4 and IPv6)

- Other unsupported protocols

NetWare, AppleTalk, NetBEUI

List of utilities/drivers not compatible with IPv6

The following utilities and drivers cannot be used with IPv6:

- TWAIN Driver

- TWAIN for Mac

- WIA Driver

- Mac PPD

- Network FAX Driver

- KPrint

- Quick Setup

- Scanner File Utility

- Scan to Mac

- Address Editor

- Address Book for Scanner

- DB Assistant

- KM-NET VIEWER

- KM-NET for Clients

- KM-NET for Accounting

- KMnet Admin

Number of network devices allowed for IPv6 communication

- Up to 1,000 network devices can use IPv6 to communicate with an

MFP connected to this product.

Restrictions

- Name resolution functions (address and host name conversion

protocols) on the network such as WINS, Bonjour and NBNS cannot be

used. (The communication specification for name resolution is

different for IPv4 and IPv6.)

- Software that establishes a communication by combining multiple

protocols may not work if one of the protocols is unsupported by this

product.

[Network connections]

Parts and function

LAN network port

LAN network port

Ethernet address

MFP network port

Ethernet address of the

MFP network port

Used to connect the LAN end of the

network cable.

Ethernet address of the LAN network

port on this product.The serial number is

the last 6 digits of this address.E.g. If the

Ethernet address is 00:C0:EE:10:00:0D,

the serial number is 10000D.

Used to connect the MFP end of the

network cable.

This is the Ethernet address for the MFP

network port.

IB-40 Specifications

Operating environment

Storage environment

EMI

CPU

Memory

Wired network interface

LED

Maximum number of IPv6

devices this product can

communicate with

Recommended Web browsers

Temperature : +0 ˚C to +70 ˚C , +32 ˚F to +158 ˚F

Humidity : 20% to 80%RH (Non-condensing)

Temperature : -10 ˚C to +50 ˚C , 14 ˚F to +122 ˚F

Humidity : 20% to 80%RH (Non-condensing)

VCCI Class B / FCC Class B / EN55022 / EN55024

32bit RISC CPU

RAM : 8MByte

FlashROM : 2MByte

10BASE-T/100BASE-TX 2 ports. (automatic detection)

10BASE/100BASE Link(Green)

Status(Orange)

1000

Internet Explorer 6 (or higher)

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, it may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for assistance.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

EN55022 Class-B

EN55024

About trademarks

- Microsoft and Windows are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other

countries.

- AirMac, AirPort, Macintosh, Mac OS and Safari are registered

trademarks of Apple Inc.

- Other brand or product names are registered trademarks or trademarks

of their respective owners.

Kyocera KM-2560 IB-40 User Guide

Kyocera KM-2560 Manual

Kyocera KM-2560 manual content summary: