Kyocera KM-3050 PF-700/710 Installation Guide
Kyocera KM-3050 Manual
 |
View all Kyocera KM-3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-3050 manual content summary:
- Kyocera KM-3050 | PF-700/710 Installation Guide - Page 1
INSTALLATION GUIDE FOR PAPER FEEDER GUIDE D'INSTALLATION DU BUREAU PAPIER GUÍA DE INSTALACIÓN PARA EL ALIMENTADOR DE PAPEL INSTALLATIONSANLEITUNG FÜR PAPIEREINZUG GUIDA ALL'INSTALLAZIONE UNITÀ DI ALIMENTAZIONE DELLA CARTA PF-700/PF-710 - Kyocera KM-3050 | PF-700/710 Installation Guide - Page 2
- Kyocera KM-3050 | PF-700/710 Installation Guide - Page 3
B D G E C A F English Supplied parts A Paper feeder 1 B Pin 2 C Retainer 1 D Taptite S binding screw, M4 × 08 2 E Paper size plate before starting to install the paper feeder. E Plaque de format de papier 4 F Support 2 G Vis TP, M4 × 10 2 Procédure Veiller à bien mettre l'interrupteur - Kyocera KM-3050 | PF-700/710 Installation Guide - Page 4
storage location (2). 3 1. Remove the lower paper cassette (3) from the MFP. 6 5 4 A 5 4 2. Place the MFP (6) on top of the paper feeder (A) with the positioning pins (4) at the front left and right of the paper feeder (A) aligned with the holes (5) in the base of the MFP. Remarque Retirer la - Kyocera KM-3050 | PF-700/710 Installation Guide - Page 5
B B 5 A 3. Secure the MFP to the paper feeder (A) using the two pins (B). 7 9 8 4. Refit the lower paper cassette (3) removed in step 1 to the MFP. 5. Remove the screw (7) and then the cover (8) from the rear of the paper feeder. 6. - Kyocera KM-3050 | PF-700/710 Installation Guide - Page 6
C 10 9 D 11 12 7. Insert the 12-P connector (10) of the paper feeder into the connector on the MFP. 7. Insérer le connecteur à douze broches (10) du bureau papier dans le connecteur du MFP. 7. Inserte el conector de 12 clavijas (10) del alimentador de papel en el conector del MFP. 7. Stecken Sie - Kyocera KM-3050 | PF-700/710 Installation Guide - Page 7
they reach the floor and adjust them to level the machine. For 120 and 220 - 240 V specifications only 12. Fit the two stays (F) to . Pour spécifications 120 et 220 - 240 V uniquement 12. Installer les deux supports (F) sur la gauche du bureau d'alimentation de papier (l'un vers l'avant et l'autre - Kyocera KM-3050 | PF-700/710 Installation Guide - Page 8
and turn the MFP main switch on. 2. Load paper into the drawer and make a test copy to check the operation. 3. Run maintenance item 993. Select "VTC PG1" and output a test pattern. For full-color machines, run maintenance item 402 and output the test pattern. 4. If the center of the paper (14 - Kyocera KM-3050 | PF-700/710 Installation Guide - Page 9
A B 16 18 19 17 Adjusting the center line 1. Open the drawer (16) of the paper feeder and loosen the three screws (18) securing the adjuster (17). A and B: test pattern output examples 2. If the test pattern output example looks like A, turn the adjusting screw (19) clockwise, move the adjuster - Kyocera KM-3050 | PF-700/710 Installation Guide - Page 10
MEMO - Kyocera KM-3050 | PF-700/710 Installation Guide - Page 11
- Kyocera KM-3050 | PF-700/710 Installation Guide - Page 12
2005. 12 303J456710 Rev.1.0
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
INSTALLATION GUIDE FOR PAPER FEEDER
GUIDE D’INSTALLATION DU BUREAU PAPIER
GUÍA DE INSTALACIÓN PARA EL ALIMENTADOR DE PAPEL
INSTALLATIONSANLEITUNG FÜR PAPIEREINZUG
GUIDA ALL’INSTALLAZIONE UNITÀ DI ALIMENTAZIONE DELLA CARTA
供纸工作台安装手册
ペーパーフィーダ設置手順書
PF-700/PF-710