Kyocera KM-3530 2530/3530/4030 Operation Guide Rev 2C - Page 130
Misfed in document finisher optional JAM 80 to 89, Metric specifications
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
CHAPTER 8 WHEN A PROBLEM OCCURS Metric specifications 5 Remove the tray. 3 1 2 6 Pull up the lock lever to open the left cover 1. 1 Remove the misfed paper in the built-in finisher output section. 2 Lower the built-in finisher tray. 7 Remove the misfed paper. 3 Remove the misfed paper. 8 Install the tray. 4 Raise the built-in finisher tray back into its original position. 9 Close the left cover 1. 5 Misfed in document finisher (optional) (JAM 80 to 89) If a misfeed has occurred in the document finisher, remove the misfed paper referring to the operation guide for the document finisher. 8-10
CHAPTER 8
WHEN A PROBLEM OCCURS
8-10
Remove the tray.
Pull up the lock lever to open the left cover 1.
Remove the misfed paper.
Install the tray.
Close the left cover 1.
5
Misfed in document finisher (optional) (JAM 80 to 89)
If a misfeed has occurred in the document finisher, remove the
misfed paper referring to the operation guide for the document
finisher.
Remove the misfed paper in the built-in finisher output
section.
Lower the built-in finisher tray.
Remove the misfed paper.
Raise the built-in finisher tray back into its original posi-
tion.
4
5
6
2
1
3
8
9
7
Metric specifications
1
2
3