Kyocera KM-3530 2530/3530/4030 Operation Guide Rev 2C - Page 132
Trouble, Checks, Action
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
CHAPTER 8 WHEN A PROBLEM OCCURS Trouble Copies come out too dark. Checks Is the copier in the auto exposure mode? Action To change the overall exposure, perform the auto exposure adjustment. Page 6-28 Is the copier in the manual exposure Adjust the exposure to the correct degree mode? using the copy exposure adjustment keys. 4-2 Copies are dirty. To change the overall exposure, perform the exposure adjustment for the each copy quality mode. 6-30 6-31 Is the platen or the original cover dirty? Clean the platen and/or the original cover. 9-1 Copy image is askew. Is the transfer roller contaminated? Are the originals set correctly? Open the front cover and pull and push back in the cleaning shaft. 3-5 Clean the transfer roller with the cleaning brush. 9-2 When setting originals on the platen, align their edges with the correct original size 4-1 scale for their size. When setting originals in the optional Docu- ment Processor, adjust the original insertion 7-1 guides to the size of the originals correctly. Misfeed occurs frequently. Is the paper set correctly in the drawer? Set paper properly. 3-1 Is paper curled, folded or wrinkled? Replace the paper with new paper. 3-1 Is there any misfed paper or loose scraps Carry out the appropriate procedure to re- of paper remaining inside the copier? move the paper. 8-3 Copies are wrinkled. Is the separation in the paper feed sec- Clean the separator. 9-1 tion dirty? Black or white lines appear Is the electrostatic section dirty? on the copy. Open the front cover and pull and push back 3-5 in the cleaning shaft. 3-6 8-12