Kyocera KM-3530 2530/3530/4030 Operation Guide Rev 2C - Page 43
When originals are set in the Document Processor, copy
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
1 Set the original(s). 2 Touch the [Function] key. The Function screen will appear. Inch specifications Metric specifications 3 Touch the [Combine] key. The [Combine] screen will appear. Inch specifications Metric specifications CHAPTER 5 FUNCTIONS 5 Touch the key corresponding to the desired layout. 6 Select the type of borderline by touching the [Solid], [Dotted] or [Borders] key. If a borderline is not necessary, touch the [None] key. IMPORTANT • If the message "Select drawer" appears, close the Combine screen and select the drawer. 7 Press the [Start] key. Scanning will start. When originals are set in the Document Processor, copying will start after scanning the set originals. When an original is set on the platen, a message for scanning the next original appears. Go to the next step. 56 89 0 Stop/ Clear Start → 8 Replace the original and then press the [Start] key. Scanning will start. 9 When all originals are scanned, touch the [Scanning finished] key. Copying will start. 4 Select the combination style by touching the [2 in 1] or [4 in 1] key. The layout set-up screen will appear. Inch specifications Metric specifications 5-11