Kyocera KM-3530 2530/3530/4030 Operation Guide Rev 2C - Page 86
Machine default, settings, Content of machine default settings, Setting range - copy machine
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
CHAPTER 6 COPIER MANAGEMENT "Machine default" settings Content of machine default settings Setting range Default settings Auto shut-off time Selects the length of time that you want to elapse 15 to 240 (min) when the copier is not used. The auto shut-off function automatically turns the power to the copier OFF. It is possible to set this time to any 15 minute increment between 15 and 240 minutes. It is also possible to deactivate the auto shut-off function. The factory default setting is 60 minutes. *It is recommended that you extend the time before the auto shut-off function engages if the copier is used relatively frequently, and shorten that time when it is used infrequently. 60 (min) Auto preheat time Select the length of time that you want to elapse 1 to 45, 60, 90, 120, - after copying ends - before the energy-sav- 180 and 240 (min) ing auto preheat function is engaged. The setting can be made to any 1-minute increment between 1 minute and 45 minutes, 60 minutes, 90 minutes, 120 minutes, 180 minutes or 240 minutes. Select copy output Selects whether to eject copied paper to copier Inner tray, Job sepa- mode (optional) or either the document finisher or job separator. rator, Finisher main *This setting is not displayed when the copier is tray, Finisher sub not equipped with the optional document finisher tray or job separator. Select FAX output mode Selects where to eject facsimile paper: the in- Inner tray, Job sepa- (optional) ner tray, job separator, document finisher or mail- rator, Finisher sub box. tray, Mailbox 1 *This setting is not displayed when the copier is not equipped with the optional document finisher or job separator. 15 (min) Inner tray Inner tray Select the main mode Selects the initial screen displayed when the Copy mode, FAX (optional) power is turned ON. mode Copy mode Key sound ON/OFF Silent mode Date/Time Selects whether you want the "beep" that sounds ON/OFF when you touch the touch panel to be turned ON or OFF. The copier can be switched to the silent mode, ON/OFF which stops the motor inside the copy machine immediately after copying has been finished. When "ON" is selected, the motor stops immediately after copying has been finished. Sets the current time for using the optional scan- Year: 2000 to 2099 ner function. Month: 1 to 12 Day: 1 to 31 Time: 00:00 to 23:59 ON OFF Year: '00 Month: 01 Day: 01 Time: 00:00 Time difference Sets the time difference for using the optional +12:00 to -12:00 scanner function. 00:00 Management change code Changes the pin code that gives you access to 0000 to 9999 the various default settings and management. *If you do change the management pin code, however, be sure to keep a note of the new code. If you do happen to forget the pin code, consult your service representation. Auto shut-off ON/OFF Selects whether you want the auto shut-off time ON/OFF function to be turned ON or OFF. 2500 (For Copiers with a copy speed of 25 copies per minute) 3500 (For Copiers with a copy speed of 35 copies per minute) 4000 (For Copiers with a copy speed of 40 copies per minute) ON 6-12 Page 6-17 6-17 6-18 6-18 6-19 6-19 6-20 6-20 6-21 6-21 6-22