Kyocera KM-5035 Print/Scan System (U) Operation Guide (Setup Edition) - Page 21

3. Performing the Required Operation at the Scanner • Scan settings 13 The Scan Settings menu is displayed in the right portion of the touch screen. If you want to change any settings, touch the key that corresponds to that setting. The following gives an example of the procedure to specify the orientation of the original. Touch the "Orig set direction" key. The Original Set Direction screen will appear. 16 If you select "ON" under "Batch scanning" in the Scan Settings menu, a message that asks whether or not you want to continue scanning will appear after scanning of the original is complete. If you DO want to continue scanning, set the next original, change any scan settings that you want, and then press the Start key. Once you have finished scanning originals, touch the "Scanning finished" key. 14 If you set the original with its top edge towards the rear of the scanner, select "Back Edge". If you set the original with its top edge towards the left of the scanner, select "Left top corner". Touch the "Close" key to register the change to that setting or the "Back" key if you want to cancel the operation and return to the previous setting. The screen will return to that shown in step 12. * If the setting for the orientation of the original is not appropriate to the actual orientation, scanning may be accomplished incorrectly. Be sure to confirm the orientation of the original when making scan settings. 17 If you select "On" under "Continuous sending" in the Scan to PC or Send E-mail screen, once the scanning operation is completed, the touch panel will return to the Scan to PC or Send E-mail screen, as appropriate, with the current settings unchanged. To continue scanning more originals, set the next original, change any of the scanning settings as required, and then press the Start key. Once you have finished scanning originals, touch the "Cancel" key. * If "Permit file overwrite" is selected in the computer's Scanner File Utility when you are using the Scan to PC function, previous files saved to that computer may be overwritten if a duplicate file name is use. Be aware of this fact when designating file names for transmission, especially when the "Continuous sending" setting is turned ON. 15 Once you have checked all of the settings, set the original and press the Start key. Scanning of the original will begin. * If you want to stop the scanning operation, touch the "Cancel" key. 3-3