Kyocera KM-5050 3050/4050/5050 Operation Guide Rev-3 (Basic)
Kyocera KM-5050 Manual
View all Kyocera KM-5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-5050 manual content summary:
- Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 1
- Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 2
Introduction Thank you for your purchase of 3050, 4050 and 5050. This Operation Guide is intended to help you operate the machine correctly, perform routine maintenance and take a simple troubleshooting action as necessary, so that you can always use the machine in good condition. Please read this - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 3
viii • Energy Star (ENERGY STAR®) Program viii • Safety Conventions in This Guide ix • Caution / Warning Labels x • Installation Precautions xi • Precautions for Use xiii • SAFETY OF LASER BEAM xvii • Safety Instructions Regarding the Disconnection of Power xix • Warranty xx OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 4
Legal and Safety Information Legal Information Copying or other reproduction of all or part of this guide without the prior written consent of Kyocera Mita Corporation is prohibited. Legal Restriction on Copying/Scanning • It may be prohibited to copy/scan copyrighted material without permission of - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 5
Kyocera Corporation. • Microsoft, MS-DOS, Windows, Windows NT and Internet Explorer are registered trademarks of Microsoft Corporation in the U.S.A. and/or other countries. • Windows Me, Windows XP and Windows Wind River Systems, Inc. • PCL6, a command language of HP LaserJet emulated by this machine - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 6
trademarks or trademarks of their respective companies. The designations ™ and ® will not be used in this Operation Guide. GPL Firmware of this machine is using in part the GPL applied codes (www.fsf.org/copyleft/gpl.html). Please access "http://www.kyoceramita.com/gpl" for more information on - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 7
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product OPERATION GUIDE v - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 8
any Windows specific code (or a derivative thereof) from the apps directory (application code) you LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 9
does not warrant that the Software is free from all bugs, errors and omissions. The parties agree that all other warranties, expressed Software and Typefaces. 9 Massachusetts U.S.A. law governs this Agreement. 10 You shall not sublicense, sell, lease, or otherwise transfer the . OPERATION GUIDE vii - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 10
Saving Control Function The device comes equipped with Sleep where printer and fax functions remain in a waiting state but load on the environment and this device supports recycled paper. Your sales or service representative can provide information about recommended paper viii OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 11
in This Guide The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect the user, other Please contact your service representative to order a replacement if the safety warnings in this Operation Guide are illegible or if the guide itself is missing - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 12
avoid fire or electric shock when removing a paper jam or when replacing toner. High temperature inside. Do not touch parts in this area, because because there is a danger of getting burned. Do not incinerate toner and toner container. Dangerous sparks may cause burn. Label inside the machine - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 13
rear cover, to allow air to be properly ventilated out of the machine. 3 15/16" 10 cm 11 13/16" 30 cm 11 13/16" 30 cm 39 3/8" 100 cm Other locations when selecting a site for the machine. • Avoid locations near a window or with exposure to direct sunlight. • Avoid locations with vibrations. • - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 14
electrical shock in case of an electric short. If an earth connection is not possible, contact your service representative. Other precautions Connect the power plug to the closest outlet possible to the machine. Handling of may cling to their nose and mouth causing suffocation. xii OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 15
certain to remove the power plug from the outlet and then contact your service representative. If anything harmful (paper clips, water, other fluids, etc.) to avoid the danger of fire or electrical shock. Then contact your service representative. Do not remove or connect the power plug with wet hands, - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 16
or other trouble. It is therefore recommended that you consult with your service representative in high humidity. Consult with your service representative in regard to the cost of cleaning the internal parts perform any operations not explained in this guide. Caution: Use of controls or adjustments - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 17
Legal and Safety Information In the event there is a problem with the machine's HDD (hard disk drive), stored Other precautions Return the exhausted toner container and waste toner box to your dealer or service representative. The collected toner container and waste toner box will be recycled or - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 18
of time, remove the paper from the cassette and the Multi Purpose (MP) Tray, return it to its original package and reseal it. xvi OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 19
U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the 1976, by the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA). This act in the United States. On this machine, the label is on the right. 3050 COPYING GUIDE xvii - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 20
at below is the label located on the cover of the optical unit. 4. Maintenance For safety of the service personnel, follow the maintenance instructions in the other section of this manual. 5. Safety switch The power to the laser unit is cut off when the front cover is opened. xviii OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 21
Instructions the instructions, may and on, the user is encouraged to try could void the user's authority to operate United States of America. Radio Tag Technology In some countries the radio tag technology used in this equipment to identify the toner (for users in California, the United States) - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 22
have been serviced by a technician not employed by Kyocera or an Authorized Kyocera Dealer, or (d) have had the serial number modified, altered, or removed. 5. This warranty does not cover Maintenance Kits or the components of Maintenance Kits, which consist of the drum unit, the fixing unit, and - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 23
About this Operation Guide This Operation Guide contains the following chapters. Chapter 1 - Part Names Identifies machine parts Describes cleaning and toner replacement. Chapter 6 - Troubleshooting Explains how to handle error messages, paper jams and other problems. Appendix Explains how - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 24
troubleshooting. Advanced Operation Guide Explains copying, printing and scanning features in depth, as well as default settings. Conventions in This Guide Indicates items that are required or prohibited so as to avoid problems. IMPORTANT: Indicates what must be observed to prevent injury or - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 25
operation of the keys on the touch panel is as follows: Actual procedure Description in this Operation Guide Press [Copy]. T Press [Next] of Quick Setup. T Press [T] twice. T Press [Change] of Original Image. Press [Copy], [Next] of Quick Setup, [T] twice, and then [Change] of - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 26
Originals and Paper Sizes This section explains the notation used in this guide when referring to sizes of originals or paper sizes. As with A4, B5 and Letter, which may be used and source tray. For further details, refer to the page detailing that function or source tray. xxiv OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 27
About this Operation Guide Icons on the Touch Panel The following icons are used to indicate originals and paper placement directions on the touch panel. Placement direction Vertical direction Originals Paper Horizontal direction OPERATION GUIDE xxv - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 28
About this Operation Guide xxvi OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 29
Date and Time 2-8 Configuring a Network (LAN Cable Connection 2-10 Accessing COMMAND CENTER (Settings for Network and Transmission 2-12 TCP/IP Settings 2-13 Sending E-mail 2-15 User Login Administration 2-27 Installing Software 2-30 Selecting the Default Screen 2-31 Changing Language - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 30
Interface 4-12 PDF Upgrade Kit (USB Key 4-12 5 Maintenance Cleaning 5-2 Toner Container and Waste Toner Box Replacement 5-7 6 Troubleshooting Solving Malfunctions 6-2 Responding to Error Messages 6-5 Clearing Paper Jams 6-12 Appendix Appendix-1 Character Entry Method Appendix - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 31
Time 2-8 • Configuring a Network (LAN Cable Connection)........ 2-10 • Accessing COMMAND CENTER (Settings for Network and Transmission 2-12 • TCP/IP Settings 2-13 • Sending E-mail 2-15 • User Login Administration 2-27 • Installing Software 2-30 • Selecting the Default Screen 2-31 • Changing - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 32
Guide KX Driver User Guide Network FAX Driver Operation Guide COMMAND CENTER Operation Guide KM-NET for Clients Operation Guide KM-NET for Direct Printing Operation Guide Scan to SMB(PC) Setup Guide PRESCRIBE Commands Technical Reference PRESCRIBE Commands Command Reference 2-2 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 33
illustration below. Connecting a scanner to your PC network with a network cable (100BASE-TX or 10BASE-T) Administrator's PC COMMAND CENTER Network settings, Scanner default settings, User and destination registration Printing Parallel MFP USB Network Network Network Send E-mail Sends the - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 34
Necessary Cable Printer/Scanner Network interface /Network Fax* LAN (10Base-T or 100Base-TX, Shielded) Printer USB interface details on Network Fax, refer to the Fax Kit Operation Guide. Optional Interface Serial interface is optionally available. Function Printer Interface Serial - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 35
the memory indicator are off. After this, turn off the main power switch. Check that the indicators are off. 2 Connect the LAN cable to the network interface located on right side of the body. 3 Connect the other end of the cable to the hub. 4 Configure the - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 36
(Optional) Follow the steps below to connect a parallel or USB printer cable to the machine. 1 When the machine is powered up, first , the PC to be connected should also be powered off. 3 Connect the printer cable to the appropriate interface located on the right side of the body. When Connecting - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 37
supplied power cable to the machine and the other end to a power outlet. IMPORTANT: Only use the power cable that comes with the machine. OPERATION GUIDE 2-7 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 38
the region and press [OK]. Date/Timer - Time Zone Set time zone. Please select the location nearest you. -12:00 Eniwetok -11:00 Midway Is -10:00 Hawaii -09:00 Alaska -08:00 Pfic Time -07:00 Arizona Time Zone Status NOTE: Press [S] or [T] to view the next region. Cancel 1/13 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 39
2006 10:10 Y M D Summer Time Off H M S On Status Cancel OK 10/5/2006 10:10 NOTE: Settings are Year (Y), Month (M), Date (D), Hour (H), Minute (M) and Second (S). 8 Press [OK]. 9 When exiting, press [Return to Top] repeatedly to return to the System Menu default screen. OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 40
such as Windows, Macintosh, UNIX and NetWare. Setting TCP/IP (When Using Fixed IP Address) Follow the steps below to set TCP/IP when a fixed IP address is used. Make sure that an IP address is available by asking your network administrator to obtain it in advance. 1 Press the System Menu key. 2-10 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 41
2 Press [System], [Next] of Network and then [Change] of TCP/IP. 3 Press [On] of TCP/ IP and [On] of DHCP. System - TCP/IP Use TCP/IP. DHCP Off On On Off Status 4 Press [OK]. IP Address Subnet Mask Default Gateway 0.0.0.0 0.0.0.0 0.0.0.0 Cancel OK 10/5/2006 10:10 5 Press the Power key, and - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 42
from the navigation bar on the left of the screen. The values for each category must be set separately. If restrictions have been set for COMMAND CENTER, enter the correct user name and password to access pages other than the startup page. 2-12 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 43
TCP/IP Settings Preparation before Use Use this page to specify the settings required for network printing and sending E-mail. The procedure for specifying the TCP/IP settings is explained below. 1 Click Advanced -> Protocols -> TCP/IP -> General. 2 Enter the correct settings - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 44
Name IP Address Subnet Mask Default Gateway DHCP/BOOTP RARP DNS network component. This name is also used as the NetBEUI Printer Windows Internet Name Service (WINS) servers. This section determines the scope of IP addresses that a Windows server can grant or lease to any requesting network GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 45
images loaded onto this machine as E-mail attachments, check the following: • The network environment used to connect this machine to the mail server A full-time connection via a LAN is recommended. • SMTP Settings Use COMMAND CENTER to register the IP address and host name of the SMTP server. • If - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 46
Set the SMTP Port Number or use the SMTP default port 25. SMTP Server Name Enter the SMTP server Login User Name When Other is selected for Authenticate, the login user name set here will be used for SMTP authentication. The maximum length of the login user name is 62 characters. Login Password - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 47
Domain Restriction Description Enter the E-mail address of the person responsible for the scanner system, such as the machine administrator, so that a reply or non-delivery report will go to a person is 30 characters. You can also specify E-mail addresses. 3 Click Submit. OPERATION GUIDE 2-17 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 48
computer connected to the network. To use this function, register the following information: • Login User Name • Login Password • SMB Port Number Windows on the computer where the folder is located. This section explains the procedure for specifying the SMB settings in COMMAND CENTER. Click Scanner - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 49
(Writable shared folder) The login user name and login password registered using the operation panel are also used for FTP login. Set up and manage user accounts on the FTP server. This section explains the procedure for specifying the FTP settings in COMMAND CENTER. Click Scanner -> FTP. Item FTP - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 50
addresses, paths to folders (SMB) on a PC, the FTP server path and fax numbers in the built-in Address Book. You can also use COMMAND CENTER to add, edit and delete individual contacts and group contacts in the Address Book. 1 Click Basic -> Address Book Contacts -> Add Contact. 2 Enter the correct - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 51
password for the destination. FTP: Enter the login password for the FTP server. The maximum length of the login user name is 62 characters. 3 Click Submit. Editing Address Book Contacts The procedure for editing information on the Address Book Contacts page is explained below. OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 52
Preparation before Use 1 Click Basic -> Address Book Contacts -> Number or Name of the contact. 2 Modify the contact information. 2-22 3 Click Submit. Adding a New Group The procedure for adding a new group to the Address Book is explained below. OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 53
Enter the group number. You can enter any number between 1 and 2500. If you enter a number that is already being used and click Submit, an error message appears. Enter the group name. The maximum length of the group name is 32 characters. 3 Click Submit. OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 54
be edited. 2 Click Add Members. To delete a group member, tick the checkbox for the member to be deleted and then click Delete Members. 2-24 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 55
external address book and store the fax number and E-mail address of the destination. Enable LDAP parameters in COMMAND CENTER. The procedure for using an external address book is explained below. 1 Register an address book on the LDAP server. Refer to the Windows Help menu for details. OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 56
before Use 2 In COMMAND CENTER, click Advanced -> Management > LDAP. 3 Enter the correct settings in each field. The settings to be specified in the LDAP settings screen are shown below. Item LDAP LDAP Server Name LDAP Port Number Search Timeout Login User Name Login Password Max Search Results - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 57
a login user name and password, and press [Login]. By default, the login user name and password are 5050 respectively. NOTE: The login user name and password are for default users with administrator rights. 3 Press [Next] of User Login Setting and then [Change] of User Login. OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 58
and password to use the machine. Login 1 If the screen shown appears during operations, press [Login User Name]. Enter login user name and password. Login User Name Login Password abcdef ******** 2-28 Status 2 Enter the login user name and press [OK]. Login 10/5/2006 10:10 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 59
For details on character entry, refer to Character Entry Method on page 2 of the Appendix. 3 Press [Login Password]. 4 Enter the password and press [OK]. 5 Check the login user name and password are correct, and press [Login]. Logout To logout from the machine, press the Logout key to return to the - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 60
if you want to use the printer function of this machine or perform TWAIN / WIA transmission or FAX transmission from your PC. NOTE: Installation on Windows XP, Windows NT 4.0/2000, Server 2003 and Windows Vista must be done by a user logged on with administrator privileges. Plug and Play is disabled - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 61
Box Default screen for Document Box (screen to appear when the Document Box key is pressed) Program Default screen for program (screen to appear when the Program key is pressed) Application Default in the Copy screen) Accessibility Send Default screen for Accessibility Send (screen to appear - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 62
the desired default screen. Common Settings - Default Screen Set the default screen to be displayed when main power switch is turned on. Copy Application Accessibility Copy SEenngdlish Accessibility Send Status Document Box Program Status 4 Press [OK]. Cancel OK 10/5/2006 10:10 5 When - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 63
10:10 5 A message instructing you to turn the power off and on appears. Press [OK]. 6 Press the Power key on the operation panel. Check that the Power key and the memory indicator are off. After this, turn on the main power switch again. The touch panel language will be changed. OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 64
stapled, turn the stack in the cassette upside down. Avoid exposing opened paper to high temperatures and high humidity as dampness can be a cause of problems. Seal any remaining paper after loading in the Multi Purpose Tray or cassettes back in the paper storage bag. If the machine will not be - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 65
prints like logo or company name, refer to the Advanced Operation Guide. Loading Paper in the Cassettes Up to 500 sheets of may be loaded in each of the two standard cassettes. The following paper sizes are supported: Ledger, Legal, Oficio II, 8.5×13.5", Letter, Letter-R, Statement-R, A3, B4, - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 66
and metric size (A, B sizes), follow the steps below to A adjust the size switch. 1. Holding the paper width adjusting tab, move the B paper width guide to a position other than that of the paper. 2. Turn the size switch A 90°. > 3. Move the size lever B up (C) or down (I). C:metric size - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 67
below). • When loading the paper, keep the side that was closest the package seal facing up. • The paper length and width guides must be adjusted to the paper size. Loading the paper without adjusting these guides may cause skewed feeding and paper jams. • Be sure that the paper length and width - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 68
m2): 50 sheets • Hagaki: 80 sheets • OHP film: 25 sheets • Envelope DL, Envelope C5, Comm. #10, Monarch, Youkei 4, Youkei 2 : 20 sheets NOTE: When you load custom size paper, enter the paper size by the Multi Purpose Tray. 2 Adjust the paper width guides to the width of the paper. 2-38 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 69
3 Insert the paper along the paper width guides into the tray until it stops. Preparation before in the Multi Purpose Tray. Acceptable envelope sizes are as follows. Acceptable Envelope Monarch Comm. #10 Envelope DL Envelope C5 Executive Comm. #9 Comm. #6-3/4 ISO B5 Envelope C4 Oufuku Hagaki Youkei - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 70
printing side face-up and with the flap closed. For portrait form envelopes, open the flap. Insert the envelope all the way along the width guides, keeping the printing side face-up and with the flap positioned opposite to the entrance. 2-40 IMPORTANT: How to load envelopes (orientation and facing - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 71
Original/Paper Setup, [Next] of Cassette setting. 3 In Cassette Settings, select one of [Cassette 1] to [Cassette 4] and press [Next]. Then press Paper Size -> [Change]. OPERATION GUIDE 2-41 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 72
detection of the paper size, press [Auto] and select [Metric] or [Inch] as the unit. Common Settings - Paper Size Set cassette paper size. Auto Standard Sizes 1 Standard Sizes 2 3 Custom 8 Status Vellum Custom 4 Color High Quality Custom 5 Cancel OK 10/5/2006 10:10 2-42 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 73
special standard sizes and custom sizes. Selectable paper sizes are as follows. ISO B5, Envelope #10, Envelope #9, Envelope #6, Envelope Monarch, Envelope DL, Envelope C5, Envelope C4, Hagaki, Oufuku , Cardstock, Color, Prepunched, Envelope, Thick, High Quality and Custom 1~8 OPERATION GUIDE 2-43 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 74
, press [Auto] and select [Metric] or [Inch] as the unit. To select the paper size, press any of [Standard Sizes 1], is remaining in Document Processor. Cancel OK 10/5/2006 10:10 If you have chosen [Size Entry], press 10/5/2006 10:10 4 Press [OK]. The previous screen reappears. 2-44 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 75
Rough Recycled Preprinted Bond Prepunched Letterhead Envelope Custom 1 Custom 2 Custom 3 Custom 6 Custom 7 Custom 8 Status Vellum Cardstock Thick Custom 4 Labels Color High Quality Custom 5 Cancel OK 10/5/2006 10:10 OPERATION GUIDE 2-45 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 76
the scanning side facedown and align it flush against the original size indicator plates with the back left corner as the reference point. 2-46 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 77
edges and in the middle of open-faced originals. CAUTION: Do not leave the document processor open as there is a danger of personal injury. OPERATION GUIDE 2-47 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 78
(1) (4) 2-48 (3) (1) Original table (2) Original width guides (3) Opening handle (4) Original eject table (5) Top cover (6) Original placement indicator Originals Supported by the Document Processor The document processor supports the following types of originals. Weight Size Capacity 45 g/m2 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 79
originals left on the original eject table. Originals left on the original eject table may cause the new originals to jam. 1 Adjust the original width guides to fit the originals. 2 Place the originals. Put the side to be scanned (or the first side of two-sided originals) face-up. Slide the - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 80
is not placed properly. Remove and place again. • Red (lower indicator) blinking : Original is jammed. Remove the jammed original and place it properly. 2-50 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 81
1 Part Names This chapter identifies the machine parts and operation panel keys. • Machine 1-2 • Operation Panel 1-5 OPERATION GUIDE 1-1 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 82
) 2 Original Size Indicator Plates 3 Clip Holder 4 Receive Indicator ... Blinks while data is received 5 Error Indicator... Blinks when an error occurs and a job is stopped 6 Left Cover 1 7 Left Cover 1 Lever 8 Left Cover 2 9 Platen 10 Operation Panel 11 Cassette 1 12 Cassette 2 1-2 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 83
14 13 15 16 17 13 Toner Container Stopper 14 Toner Container 15 Waste Toner Box 16 Green Knob (A1) 17 Paper Feed Unit (A2) 18 Paper Feed Unit Cover (A3) Part Names 18 OPERATION GUIDE 1-3 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 84
22 Length Adjustment Plate 23 Top Tray 24 Main Power Switch 25 Paper Width Guides 26 Multi Purpose (MP) Tray 27 Memory Card Cover Holder 28 Handles 29 Card Slot 32 USB Interface Connector 33 Network Interface Connector 34 Parallel Interface Connector 35 Option Interface Slot (OPT1) 36 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 85
Panel 15 9 10 11 12 13 Collate/ Offset Layout/Edit Advanced Setup 10/5/2006 10:10 87 6 19 20 21 22 8 Document Box Key/Indicator 9 Accessibility Display Key/Indicator 10 Print Indicator USB memory (general-purpose item) 14 Error Indicator ... Blinks when an error occurs and a job is stopped 15 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 86
Part Names 1-6 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 87
Angle 3-5 • Touch Panel Display 3-6 • Copying 3-7 • Printing - Printing from Applications 3-22 • Sending 3-24 • Specifying Destination 3-40 • Using Document Box 3-43 • Printing Documents Stored in Removable USB Memory .... 3-54 • Canceling/Viewing/Changing Jobs 3-56 • Checking Remaining - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 88
one by one. Unlit: This function is ready. Lit: This function is selected. Copy is selected as the default so that the Copy key/indicator lights on first. NOTE: A key whose indicator is unlit can be used even key to off may cause damage to the standard internal hard disk. 3-2 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 89
main power switch off when the optional fax kit is installed. If you turn the main power switch off, you cannot receive fax messages. OPERATION GUIDE 3-3 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 90
will be ready to operate within 15 seconds. Auto Sleep Auto Sleep automatically switches the machine into Sleep if left idle for a preset time. The default preset time is 8 minutes. 3-4 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 91
Basic Operation Adjusting the Operation Panel Angle Adjust the angle of the operation panel in two as shown by releasing the operation panel lock lever. OPERATION GUIDE 3-5 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 92
Layout/Edit Copies 1 Mirror Image Multi-page Form Advanced Setup 10/5/2006 10:10 Stand-by Display When System Menu Operation Is Completed When the / Finishing Original Image Image Quality Collate/ Offset Layout/Edit Copies 1 Interrupt Advanced Setup 10/5/2006 10:10 3-6 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 93
on the platen or in the optional document processor. NOTE: For loading instructions, refer to Loading Originals on page 2-46. 3 Check that [Auto] Plain Letter Plain MP Tray Setting Cancel OK 10/5/200 6 10:10 NOTE: Select paper size manually, if necessary, instead of using automatic paper - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 94
a preview image of the scanned document on the panel. NOTE: To view a preview of an image stored in a Custom Box, refer to the Advanced Operation Guide. The procedure for previewing scanned originals is explained below. The procedure described here is for copying a single-page original. 1 Place - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 95
Layout/Edit Advanced Setup 10/5/2006 10:10 3 The machine starts Copies 1 Interrupt Advanced Setup 10/5/2006 10:10 4 To change the mode when a preview image is displayed, press Reset key and then change the mode. For booklet Density Adjustment Option Description Manual Adjust density using 7 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 96
- - Preview Quick Setup Status Org./Paper/ Finishing Image Quality Layout/Edit Advanced Setup 10/5/2006 10:10 2 Adjust density manually pressing [-3] (Lighter) to [+3] (Darker). You can change the density level [-3] ( selecting the quality of copies is explained below. 3-10 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 97
Photo Status 3 Press [OK]. Press the Start key. Copying begins. Add Shortcut Cancel OK 10/5/2006 10:10 Zoom Copying Adjust the magnification to reduce or enlarge the original image. The following zoom options Letter-R A4 Ledger: 129 % A3: 141 % Statement-R: 64 % A5: 70 % OPERATION GUIDE 3-11 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 98
Basic Operation Manual Zoom Manually reduces or enlarges the original image in 1% increments between 25% and 400%. 25 % 400 % Preset Zoom Reduces or enlarges at preset , B5 -> A4), 86% (A3 -> B4, A4 -> B5), 81%(B4 -> A4, B5 -> A5), 70% (A3 -> A4, B4 -> B5), 50%, 25% (Min.) 3-12 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 99
1 Combine Duplex Margin/ Centering Cover Memo Page Border Erase Form Overlay Image Quality Layout/Edit Advanced Setup 10/5/2006 10:10 2 Press [Standard Zoom] 64% Ledger >>Letter 50% Ledger >>STMT 25% Min. OK 10/5/2006 10:10 (horizontal) and Y (vertical). You can also enter the - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 100
- 400) % # Keys (25 - 400) % # Keys Cancel Top Edge Top Original Orientation OK 10/5/2006 10:10 Duplex Copying Produce two-sided copies. The following duplex options are available. One-sided to Two-sided Produces two edge, facing the same orientation when turning the pages. 3-14 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 101
Two-sided Produces two-sided copies from two-sided originals. The optional document processor is required. 5 3 1 5 3 1 Original Copy NOTE: The paper sizes supported in Two-sided to Two-sided are Ledger, Legal, Letter, Executive Statement-R, Oficio II, 8.5×13.5", A3, B4, A4, B5, A5-R and Folio - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 102
from right to left. NOTE: The following sizes of originals and paper are supported in Two- sided to One-sided and Book to One-sided. Original: 12 3 21 0 3 4 2 Original Copy NOTE: The sizes of originals and paper supported in Book to Two-sided are Letter, A4, B5, and 16K. The procedure for using - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 103
# Org./Paper/ Finishing Copies 1 Combine Duplex Margin/ Centering Cover Memo Page Border Erase Form Overlay Image Quality Layout/Edit Advanced Setup 10/5/2006 10:10 2 Select the desired Duplex option. Ready to copy. copy function for tasks such as those shown below. OPERATION GUIDE 3-17 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 104
different orientation in the paper source other than the selected paper source. The paper sizes supported in Offset are A4, B5, Letter and 16K. The procedure for using collate/offset Original Orientation Output Tray Image Quality Layout/Edit Advanced Setup 10/5/200 6 10:10 3-18 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 105
OK] to display Off the image. Offset Off Cancel OK 10/5/2006 10:10 Copies 1 On Each Page Status 4 Press [OK]. Add press the Start key. Copying begins. OK 10/5/2006 10:10 Reserve Copy This function allows you to reserve default screen appears on the touch panel during printing. OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 106
Advanced Setup 10/5/2006 10:10 2 Press the User Name: ----- The default screen for copying appears. Scanner Setting Original Pages 2 Printer Setting Copies 2/ 24 Letter 100% 2-sided Top Edge Top Status Interrupt Letter 2-sided Collate Plain Top Tray Cancel Reserve Next 10/5/200 6 10:10 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 107
GUIDE automatically reset and returns to the default setting. Scanner Setting Original Pages 2 Job Name: doc20060505113414 User Name: ----Printer Setting Copies 2/ 24 Letter 100% 2-sided Top Edge Top Status Interrupt Letter 2-sided Collate Plain Top Tray Cancel Reserve Next 10/5/200 6 10:10 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 108
the printer driver on your computer from the supplied CD-ROM (Product Library). 1 Create a document using an application. 2 Click File and select Print in the application. The Print dialog box the Number of copies box. Enter any number up box appears. 6 Select the Basic tab and click - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 109
, to match the orientation of the document. Selecting Rotate 180° will print the document rotated 180°. 9 Click OK button to return to the Print dialog box. 10 Click OK button to start printing. OPERATION GUIDE 3-23 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 110
a scanned image, you can also print the image or send it to the Document Box. To use the Scanning Function perform the following steps: • Program the settings, including the E-mail setting on the machine. • Use COMMAND CENTER (the internal HTML web page) to register the IP address, the host name of - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 111
and SMTP server host name in COMMAND CENTER beforehand. For details, see Accessing COMMAND CENTER (Settings for Network and Transmission) on page 2-12. 1 Place the originals on the platen or in the optional document processor. NOTE: For loading instructions, refer to Loading Originals on page - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 112
also be set. Destination 0 Add to Addr Book Status Next Dest. Cancel OK 10/5/2006 10:10 5 Press [To:], [Cc:] or [Bcc:] to change the recipient status as DDD EEE 006 007 008 FFF GGG HHH III 009 010 1/10 JJJ Destination Status Quick Setup Type of Original/ Transmission Color/Image - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 113
10 Press the Start key. The scanned original is sent to the specified • Be sure that SMB Protocol of COMMAND CENTER is On. Refer to SMB Settings on page 2-18. 1 Place the originals on the platen or in the optional document processor. NOTE: For loading instructions, refer to Loading Originals on page - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 114
User Name Login Password Add to Addr Book Status Next Dest. 5 Enter the destination Host Name data and press [OK]. Use the keyboard to enter. Destination 1 Cancel Connection Test OK 10/5/2006 10:10 Limit:126 characters Input: 0characters Backspace Upper-case Lower-case No./Symbol Status - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 115
Name connection. FTP Path Login User Name Login Password Destination 1 Add to Addr Book Status Next Dest. Cancel Connection Test OK 10/5/2006 10:10 NOTE: Connected appears when connection to the destination is correctly established. If Cannot connect appears, review the entry. To specify - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 116
original image in a folder of an FTP server. NOTE: Be sure that FTP of COMMAND CENTER is On. Refer to FTP Settings on page 2-19. 1 Place the originals on the platen or in the optional document processor. NOTE: For loading instructions, refer to Loading Originals on page 2-46. 3-30 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 117
User Name Login Password Add to Addr Book Status Executing TX job **. Next Dest. 5 Enter the destination Host Name data and press [OK]. Use the keyboard to enter. Destination 1 Cancel Connection Test OK 10/5/2006 10:10 Limit: 62characters Input:0 characters Backspace Upper-case Lower - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 118
. FTP Path Login User Name Login Password Destination 1 Add to Addr Book Status Executing TX job **. Next Dest. Cancel Connection Test OK 10/5/2006 10:10 NOTE: Connected. appears when connection to the destination is correctly established. If Cannot connect. appears, review the entry - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 119
Library). Image data scanning using WIA Driver is supported in Windows Vista only. Setting TWAIN Driver Register this machine to the TWAIN Driver to select the machine's Custom Box. 1 Select Start button of the Windows display, All Programs, Kyocera and then TWAIN Driver Setting. NOTE: You can also - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 120
and select this machine from the list. 5 Enter the machine's IP address or host name in the Scanner Address. NOTE: When the machine's IP address is unknown, contact Administrator. 6 Click User Authentication Settings button. If user login administration is invalid, go to Step 8. OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 121
the checkbox beside Authentication, enter Login User Name (up to 64 characters) and Password (up to 64 characters) and then click the OK button. 8 Click the OK button. 9 The machine is registered to the PC and the machine name and model name are displayed in the Scanner List field. NOTE: Click the - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 122
If Windows Security and User Account Control are displayed, no trouble should be found with operation after installing the driver and software we have provided. Continue installation. 3 Click the Settings tab and enter the machine's IP address or host name in the Scanner Address field. If user login - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 123
Basic Operation NOTE: When the machine's IP address is unknown, contact Administrator. 4 Select the checkbox beside Authentication, enter Login User Name (up to 64 characters) and Password (up to 64 characters) and then click the OK button. 5 Click the Close button. The machine is registered to the - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 124
Description Change the display in the Document List field to List or Thumbnails. After scanning the document data, delete the data from the Custom Box. Invert the document data color to start scanning. 5 Click the OK button. 6 Select the document data to be scanned from Document List. 3-38 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 125
the checkbox beside the pages you want to scan. The selected pages will be scanned. 8 Click the Acquire button. The document data is scanned. OPERATION GUIDE 3-39 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 126
PQRS TUV WXYZ 0-9 checkmark in the E-mail Folder Group check box. To use Cancel OK an address book on Status Executing TX job **. 10/5/2006 10:10 the LDAP server, select [Ext Address Book] of [Address Book in the list, select the destination and press [Delete]. 3-40 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 127
E-mail Folder Search(Name) 0001 / 0002 Search(No.) Edit Address Book Detail Group Status Executing TX job **. Cancel OK 10/5/2006 10:10 OPERATION GUIDE Keys used Search type 1 Search by name 2 Search by address number 3 Advanced search by initial letter 4 Advanced search by - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 128
200 6 10:10 NOTE: If the One-touch Keys for the desired destination is hidden on the touch panel, press [T] or [S] to scroll and view next or previous Onetouch Keys. This procedure assumes that One-touch Keys have already been registered. Refer to the Advanced Operation Guide for more information - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 129
Custom Box. which the file is to be No. Box Name Owner stored. 001 SALES Anonymous Use(%) - - - - Edit Box 001/001 Custom Box Status Store File Detail Job Box Removable Memory Open 10/5/2006 10:10 NOTE: The Custom Box to store a file needs to be created in advance. OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 130
Basic Operation 4 Press [Store File]. Custom Box. No. Box Name 001 SALES Owner Anonymous Use(%) - - - - Edit Box 001/001 Custom Box Status Store File Detail Job Box Removable Memory Open 10/5/2006 10:10 NOTE: If a password is set for the Custom Box in advance, enter the correct - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 131
Box Removable Memory Open Custom Box. No. Box Name 001 SALES Owner Anonymous Use(%) - - - - 10/5/2006 10:10 Edit Box 001/001 Custom Box Status Store File Detail Job Box Removable Memory Open 10/5/2006 10:10 NOTE: If a password File Status Close 10/5/2006 10:10 NOTE: To cancel - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 132
Box key. 3-46 2 Press [Custom Box] and select the box Custom Box. containing the No. Box Name Owner document you want 001 SALES Anonymous to be sent. Use(%) - - - - Edit Box 001/001 Custom Box Status Store File Detail Job Box Removable Memory Open 10/5/2006 10:10 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 133
Box 001/001 Custom Box Status Store File Detail Job Box Removable Memory Open 10/5/2006 10:10 NOTE: If a password is set for the Custom Box in advance, enter the correct password H M S On Status Cancel OK 10/5/2006 10:10 NOTE: Refer to Specifying Destination on page 3-40 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 134
Box key. 2 Press [Custom Box] and select the box Custom Box containing the No. Box Name Owner document to be 001 Box 001 User 1 moved. Use(%) 20% 001/001 Edit Box Custom Box Status Store File Detail Job Box Removable Memory Open FAX Box 10/5/2006 10:10 3-48 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 135
[Open]. Custom Box No. Box Name 001 Box 001 Owner User 1 Basic Operation Use(%) 20% 001/001 Edit Box Custom Box Status Store File Detail Job Box Removable Memory Open FAX Box 10/5/2006 10:10 NOTE: If a password is set for the Custom Box in advance, enter the correct password. 4 From - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 136
Box No. Box Name 001 Box 001 Owner User 1 Use(%) 20% 10/5/2006 10:10 001/001 Edit Box Custom Box Status Store File Detail Job Box Removable Memory Open FAX Box 10/5/2006 10:10 NOTE: If a password is set for the Custom Box in advance, enter the correct password. 3-50 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 137
11:11 1 MB joined. Up to 10 0002 Document 2 05/05/2006 11:12 checkbox. Close Status 10/5/2006 10:10 NOTE: To cancel 2 Date and Time 05/05/2006 10:10 05/05/2006 10:15 Size 1 MB 1 MB 001/001 . Cancel Next 10/5/2006 10:10 File Name Status Cancel Back Join 10/5/2006 10:10 9 Enter a - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 138
/5/2006 10:10 NOTE: Original documents before joining are retained. Delete them if they are unnecessary. Printing Documents Stored in the Job Box Print documents stored in the job box. The following boxes and documents are contained in the job box. Type of box contained Documents stored Private - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 139
/5/2006 10:10 NOTE: If a password is set for the Custom Box in advance, enter the correct password. 5 Use the [+] or [-] key Document 1 or the keys on the number pad to enter the number of copies and then Copy(s) press [Start Print]. Printing begins. Cancel Start Print OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 140
compression PDF files and encrypted PDF files are not supported. • PDF files you wish to print should error free if a USB hub is used. Printing Print documents stored in the removable USB memory. 1 Press the Document Box instructions on the screen. 3 Press [Removable Memory]. 3-54 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 141
10/05/2006 09:50 10/05/2006 10:00 10/05/2006 10:05 1 MB 1 MB 1 MB 1 MB Delete Detail 001/999 Memory Detail Remove Memory Custom Box Status Job Box Removable Memory FAX Box 10/5/2006 10:10 4 Remove the USB memory after Removable Memory can be safely removed is displayed. OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 142
follows. [Printing Jobs]: 8 types: Copy job, Printer job, FAX reception, i-FAX reception, E-mail reception, Job from Document Box, Report/List, Data from Removable Memory [Sending Jobs Pause All Print Jobs Cancel Priority Override User Name Status Waiting Waiting Waiting Waiting Waiting Move - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 143
Setting is set to On Printing jobs The Copy function default screen appears on the touch panel during printing. 1 Press Paper Selection Collate Collate/ Offset Layout/Edit Advanced Setup 10/5/2006 10:10 2 To cancel printing, select [Cancel], and then press [Close]. OPERATION GUIDE 3-57 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 144
Job Name: doc20060505113414 User Name: ----- The current print job is cancelled. Scanner Setting Original Pages 2 Printer Setting Copies 2/ 24 Letter 100% 2-sided Top Edge Top Status Interrupt Letter 2-sided Collate Plain Top Tray Cancel Reserve Next 10/5/200 6 10:10 Checking the Job - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 145
000082 02/25 14:21 doc00100043520060225142110 000083 02/25 14:13 doc20060225141358 000084 02/25 14:10 doc20060225141034 User Name Result OK OK OK NG OK Detail 001/001 4 Details of the selected job a more urgent queued job. This is referred to as Priority Override. OPERATION GUIDE 3-59 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 146
:46 doc20060225144511 doc20060225144527 doc20060225144633 doc20060225144644 User Name Status Waiting Waiting Waiting Storing Jobs Device/ Communication Paper/Supplies 10/5/2006 10:10 4 The suspended print job will Print Jobs Cancel Priority Override User Name Status Waiting Waiting Waiting - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 147
Status 30% 30% 30% 30% 0% Others Type Staple A Staple B Punch waste Status OK No Staples OK Printing Jobs Status Sending Jobs Storing Jobs Device/ Communication Paper/Supplies 10/5/2006 10:10 3 Check the remaining toner of Toner Information and the remaining paper of each paper source of - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 148
registrations and the functions available for registration are as follows. Function Copying Sending Default Registration 1: Zoom 2: Density 3: Staple/Punch 4: Duplex 5: Original Image Image • Color Selection • Original Size • Sending Size • File Format • Original Orientation 3-62 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 149
Default Registration Functions Available for Registration Document Box Document Storage 1: Zoom 2: Density 3: Scan Resolution 4: 2-sided/Book Original 5: Original Image 6: Color Selection Sending From Box Printing From Box Layout/Edit Advanced Setup 10/5/2006 10:10 1 Press the System Menu - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 150
set replacement location. Copy - Original Image Register Original Image function on the Quick Setup screen. Off Key 1 Key 4 Key 2 Key 5 Key 3 Key 6 Status Cancel OK 10/5/2006 10:10 4 Press [OK]. The Original Image Quality function will be newly registered. 3-64 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 151
Paper Feeder 4-4 • 3000 Sheet Paper Feeder 4-5 • Built-in Finisher 4-5 • Document Finisher 4-9 • 3000 Sheet Document Finisher 4-9 • Job Separator 4-10 • Document Table 4-10 • Key Counter 4-11 • FAX Kit 4-11 • Data Backup Kit 4-11 • Security Kit (USB Key 4-12 • Serial Interface 4-12 • PDF - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 152
following optional equipment is available for the machine. Mailbox Document Processor Document Table Built-in Finisher Job Separator Document Finisher 3000 Sheet Document Finisher Folding Unit 4-2 Paper Feeder 3000 Sheet Paper Feeder OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 153
Key Counter Data Backup Kit Optional Equipment Security Kit PDF Upgrade Kit Fax Kit OPERATION GUIDE Serial Interface 4-3 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 154
's double cassettes can be installed in the printer. Paper capacity and loading method are the same as Cassettes 1 and 2. Refer to Loading Paper in the Cassettes on page 235. NOTE: Left cover 3 is located on the left side of the paper feeder for use in clearing paper jams. 4-4 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 155
a large quantity of finished prints. The finisher offers a convenient means of sorting. Sorted finished prints may also be stapled. 1 Finisher tray 2 Finisher process tray 1 2 OPERATION GUIDE 4-5 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 156
-R, A3, B4, A4, A4-R, B5, Folio, 8K or 16K prints. Adding Staples 1 Pull to open the stapler front cover. 2 Pull out the staple holder. 4-6 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 157
as it will go. Pull to remove the paper tape wound on the staple case. 6 Insert the staple holder into the slot of the staple unit again. When fully inserted, the staple holder locks with a clicking sound. OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 158
of the staple holder. 5 Insert the face plate back in place. When fully inserted, the face plate locks with a clicking sound. 6 After lifting the staple unit slightly, lower it and insert it again into its place. 7 Close the stapler front cover. 4-8 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 159
may also be stapled. For further details, refer to the document finisher Operation Guide. 3000 Sheet Document Finisher The document finisher holds a large quantity of finished the 3000 sheet document finisher Operation Guide. Other options include the mailbox and folding unit. OPERATION GUIDE 4-9 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 160
to output tray for easier sorting. Specify as the output tray for copy or print jobs. Or, specify as the default output tray for printing from the copy or Document Box screen, printing from the PC, and printing of the received fax data. Document Table For laying originals or other documents - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 161
it as a network fax, by using it with a computer. When two FAX kits are installed, the units can be Guide. A microchip card for storing fax reception data and job accounting data. Installation and removal of the card is performed by our service representative. Refer to Fax Kit Operation Guide - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 162
because no data cannot be decoded by ordinary output or operations. Serial Interface Install for connecting to PCs with serial port interfaces. Supports the RS232C serial interface. PDF Upgrade Kit (USB Key) When saving scanned originals as PDF files, enables the creation of high compression - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 163
5 Maintenance This chapter describes cleaning and toner replacement. • Cleaning 5-2 • Toner Container and Waste Toner Box Replacement .. 5-7 OPERATION GUIDE 5-1 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 164
or other organic solvents. Original Cover Document Processor 1 Open the top cover of the document processor. Holding the green grip near you, lift the reverse unit out. 2 Clean the white roller at the inside of the bottom. 5-2 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 165
surface of the slit glass located on the left side and the reading guide on the document processor with the supplied dry cloth. 3.Close the document sheet may cause black streaks to appear in the output. Hold End 10/5/2006 10:10 IMPORTANT: Lightly wipe the slit glass with a dry cloth. To remove - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 166
open left cover 1. 4 As shown in the figure, clean dirt from the separator by moving the brush from side to side along the separator. 5-4 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 167
5 Put away the cleaning brush, press the specified position of the front cover and left cover 1 to close. Transfer Roller 1 Open the front cover. 2 Remove the cleaning brush (blue colored). 3 Pull up and open left cover 1. Maintenance OPERATION GUIDE 5-5 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 168
the left end of the roller. 5 Put away the cleaning brush, press the specified position of the front cover and left cover 1 to close. 5-6 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 169
without delay even if several more copies are still possible. When replacing the toner container, replace the waste toner box as well. Every time you replace the toner container, be sure to clean the parts as instructed below. Dirty parts may deteriorate output quality. CAUTION: Do not attempt to - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 170
stopper up, hold the toner container handle and take out slowly. 4 Unwrap a new toner container and tap its top 5-6 times. 5 Shake the toner container at least 10 times horizontally to distribute the toner evenly. 6 Insert the toner container slowly while holding its handle. 5-8 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 171
7 Using both hands, push in the toner container until it is locked. 8 Remove the waste toner box. 9 Peel the sticker off the waste toner box and remove the cap. 10 Put the cap on the opening in the waste toner box and attach the sticker to the cap. Maintenance OPERATION GUIDE 5-9 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 172
container or the waste toner box. Dangerous sparks may cause burns. CAUTION: Do not attempt to force open or destroy the toner container or the waste toner box. 12 Install a new waste toner box. 13 Remove the cleaning brush (blue colored). 14 Pull up and open left cover 1. 5-10 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 173
front cover and left cover 1 by pressing specified part. 18 Open the Multi Purpose Tray and remove the filters F1 and F2. F1 F2 OPERATION GUIDE 5-11 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 174
back in place and close the Multi Purpose Tray. NOTE: Return the exhausted toner container and waste toner box to your dealer or service representative. The collected toner container and waste toner box will be recycled or disposed in accordance with the relevant regulations. 5-12 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 175
6 Troubleshooting This chapter explains how to solve problems with the machine. • Solving Malfunctions 6-2 • Responding to Error Messages 6-5 • Clearing Paper Jams 6-12 OPERATION GUIDE 6-1 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 176
Use [Image Quality] to set the correct density level. When changing the default density level, adjust the density manually and choose the desired level. Shake the toner container from side to side about 10 times. Replace the toner container. Replace the paper with new paper. Set the correct density - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 177
screen? Press the Status/Job Cancel key, - [Printing jobs], and then [Resume All Print Jobs] to restart printing. Are the application software Check that the printer driver and - settings at the PC set application software settings are properly? set properly. OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 178
Troubleshooting Symptom Checkpoints While the operation panel was being used, the or 200×400dpi Super Fine for the scan resolution? Corrective Actions Check the panel lock setting in COMMAND CENTER and change the setting if necessary. Select a file format other than high compression PDF. Format - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 179
center toner container. 5-7 An error has occurred. - Box limit exceeded. - Internal error has occurred. - Turn the main power switch off and on. If error occurs repeatedly, make a note of the error code displayed on the touch panel, and contact your Service Representative. Document box - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 180
Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Cannot connect to - Authentication Server. Press [End] and check the following - items: • Registration to Authentication Serve • Password and computer address for Authentication Server • Connection of Network Guides. - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 181
Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Empty the punch - waste box. The punch waste box of the - document finisher or 3,000-sheet capacity document finisher is full. Follow the instruction on the touch panel to empty the punch waste box. Failed to - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 182
memory - error. Removable Memory is - removed. Replace all originals - and press [Continue]. Replace the waste - toner box. Corrective touch panel. Leave the machine on and follow the instruction to remove the jammed paper. 6-12 Warning. Low printer memory. The - job is paused. Press [Continue - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 183
scan data to an FTP server. Use COMMAND CENTER and register the SMTP server name and the host name correctly. 1102: The login user name is incorrect or the domain name has not been entered. Enter login user name, domain name and password correctly. 1103: The network path name is incorrect or you do - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 184
- document finisher or 3,000-sheet capacity document finisher is not installed correctly. Follow the instruction on the touch panel to set the punch waste box correctly. Set the waste toner - box. The waste toner box is not installed 5-7 correctly. Set it correctly. 6-10 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 185
Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Staple error. - If a staple error occurs, the machine - will stop and the corrective action will be indicated on the touch panel. Leave the machine on and follow the instruction printing job. OPERATION GUIDE 6-11 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 186
. Clearing instructions will also be displayed. Job No.: 0001 Paper jam. Job Name: JAM*** JOB001 User Name: ABCDEF 1.Open left cover 1 of the machine. 2.Remove the paper. 3.Hold the handle to lift the duplex unit. 4.Remove the paper. 5.Close the cover. Status 02/05 Hold 10/5/2006 10:10 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 187
Troubleshooting Paper Jam Location Indicator Paper Jam Location H Document processor (Option) I Document finisher (Option) Reference Page 6-24 6-26 After you remove the jam, the machine will warm up again and the error shock. CAUTION: The fixing unit is extremely hot. Take sufficient - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 188
Troubleshooting 2 Remove the jammed paper. 3 Pull out cassette 1. 4 Remove the jammed paper. If the paper tears, remove every loose scrap from inside the machine. 5 Push cassette 1 back in place securely. 6 Press the specified position to close left cover 1. 6-14 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 189
Troubleshooting Cassette 2 Follow the steps below to clear paper jams in cassette 2. 1 Open left cover 2. 2 Remove the jammed paper. 3 Pull out cassette paper. If the paper tears, remove every loose scrap from inside the machine. 5 Push cassette 2 back in place securely. OPERATION GUIDE 6-15 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 190
Troubleshooting 6 Close left cover 2. Optional Cassettes 3 and 4 Follow the steps below to clear paper jams in cassettes 3 or 4 when using the optional paper the jammed paper. If the paper tears, remove every loose scrap from inside the machine. 3 Pull out the cassette in use. 6-16 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 191
4 Remove the jammed paper. Troubleshooting 5 Push the cassette back in place securely. 6 Close left cover 3. Multi Purpose Tray Follow the steps below to clear paper jams inside left cover 1, 2 or 3 when using the optional paper feeder or 3,000-sheet capacity paper feeder. OPERATION GUIDE 6-17 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 192
Troubleshooting 1 Open the left cover where the paper is jammed inside. 2 Remove the jammed paper. If the paper tears, remove every loose scrap from inside the machine. 3 Close the left cover. Duplex Unit 1 Follow the steps below to clear paper jams in the duplex unit. Pull up left cover 1 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 193
remove the jammed paper. Troubleshooting 4 Press the specified position to close left cover 1. Duplex Unit and Cassette 1 Follow the steps below to clear paper jams in duplex unit and cassette 1. 1 Pull up left cover 1 handle and open left cover. 2 Remove the jammed paper. OPERATION GUIDE 6-19 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 194
Troubleshooting 3 Lift duplex unit and remove the jammed paper. 4 Pull out cassette 1 and remove the jammed paper. If the paper tears, remove every loose scrap from inside the machine. 5 Push cassette 1 back in place securely. 6 Press the specified position to close left cover 1. Paper Feed Unit - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 195
2 Remove the jammed paper. If the paper tears, remove every loose scrap from inside the machine. 3 Open front cover. Troubleshooting 4 Turn the lower green knob (A1) clockwise. 5 Remove the jammed paper. If you cannot remove the paper, proceed with the next step. OPERATION GUIDE 6-21 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 196
Troubleshooting 6 Pull out paper feed unit (A2). 7 Open paper feed unit cover (A3) and remove the jammed paper. 8 If the paper is torn, pull paper feed unit (A2) all the way out and lift it slightly to remove the paper. 9 Remove the jammed paper. If you cannot remove the paper, proceed with - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 197
11 Press the specified position to close left cover 1. Troubleshooting Built-in Finisher (optional) If paper is jammed in the optional built-in finisher, use the procedure tray. (3) (1) (2) 3 Lift up the handle on left cover 1 and open left cover 1. 4 Remove any paper. OPERATION GUIDE 6-23 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 198
Troubleshooting 5 Close left cover 1. 6 Re-attach the output tray. 7 Lower the finisher process tray. 8 Remove any paper from the tray. 9 Raise finisher process tray. Optional Document Processor Follow the steps below to clear paper jams in the optional document processor. 6-24 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 199
. If it is difficult to remove the original, turn the feed dial. The original will be pushed to a place where it is easier to remove. Troubleshooting OPERATION GUIDE 6-25 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 200
Troubleshooting 4 Lift the reverse unit. 5 Remove the jammed original. If the original tears, remove every loose scrap from inside the machine. 6 Replace the reverse unit, and close the document processor top cover. 7 Reload the originals on the document processor tray. Optional Document Finisher - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 201
Appendix • Character Entry Method Appendix-2 • Specifications Appendix-6 OPERATION GUIDE Appendix-1 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 202
Backspace 4 5 6 Upper-case Lower-case No./Symbol Space Cancel OK 7 8 9 10 11 No. Display/Key Description 1 Display Displays entered characters. 2 Limit Display Displays maximum Press to enter numbers and symbols. 9 [Space] Press to insert a space. Appendix-2 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 203
Appendix No. Display/Key Description 10 [Cancel] Press to cancel entered characters and return to the screen before the entry. 11 [OK] Press to finalize entry in the keyboard, press the cursor key and scroll the screen to view other numbers or symbols to enter. OPERATION GUIDE Appendix-3 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 204
Lower-case No./Symbol Space Cancel OK 5 Press [Upper-case]. 6 Press [A]. 7 Press [No./Symbol]. 8 Press [S] or [T] repeatedly to view the keyboard containing [-] and [1]. Appendix-4 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 205
9 Press [-] and [1]. Path Use the keyboard to enter. List A-1 Appendix Limit:126 characters Input:8 characters Backspace 1/4 Upper-case Lower-case No./Symbol Space Cancel OK 10 Check that the entry is correct. Press [OK]. OPERATION GUIDE Appendix-5 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 206
Copying System Indirect Electrostatic System Originals Supported Sheets, Books, 3-dimensional objects ( RH) Memory 512 MB standard Hard Disk 80 GB Operating Environment Temperature 10 to 32.5ºC/50 to 90.5ºF Humidity 15 to 80% Altitude 2,500 Purpose Tray) Appendix-6 OPERATION GUIDE - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 207
Appendix Copier Copying Speed (Platen) 30 ppm model 40 ppm model 50 ppm model First Copy Time Resolution Continuous Copying Zoom Level A3/ to 999 sheets Any level from 25 to 400% in 1% increments (with the document processor: 25 to 200%) Includes preset zoom levels OPERATION GUIDE Appendix-7 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 208
Windows 95 (OSR2), Windows 98 (Second Edition), Windows NT 4.0 (Service Pack 5 or later), Windows 2000 (Service Pack 2 or later), Windows Me, Windows XP, Windows Server 2003, Windows Vista, Apple Macintosh OS 9.x/OS X 10.x Parallel interface: 1 (based on IEEE1284) Network (printer MIB supported) ON - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 209
error diffusion) (c) Text/Photo mode: Binary/dot 256 gradations (error diffusion) (d) OCR mode: Binary/dot 2 gradations Color: RGB 256 values/dot Zoom Level Same as Copier System : Windows 2000 (Service Pack 2 or later), Windows XP, Windows Vista *3 Available Operating System : Windows Vista *4 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 210
Supported or less Paper Feeder (option) Paper Supply Method Paper Size Supported Paper Dimensions (W) × (D) × (H) Weight Friction Feed (No 26 kg 3000 Sheet Paper Feeder (option) Paper Supply Method Paper Size Supported Paper Dimensions (W) × (D) × (H) Weight Friction retard method (No. - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 211
3000 Sheet Document Finisher (option) Number of Trays Paper Size Tray A (Non-stapling) Tray B Tray C Supported Paper Weight Maximum Sheets for Stapling Dimensions (W) × (D) × (H) Weight 3 tray Ledger, Legal, Oficio II, . 105.6 lbs. or less / Approx. 48 kg or less OPERATION GUIDE Appendix-11 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 212
or less Built-in Finisher Number of Trays Paper Size (Non-Stapling) Supported Paper Maximum Sheets for Stapling Dimensions (W) × (D) × (H) Weight 1 tray or less Environmental Specifications Time to Sleep mode (default setting) Duplexing Paper supply capability 8 minutes Standard 100% recycled - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 213
Entry Method Appendix-2 Checking Remaining Paper 3-61 Toner 3-61 Cleaning Document Processor 5-2 Glass Platen 5-3 Original Cover 5-2 Separator 5-4 Slit Glass 5-3 Transfer Roller 5-5 Clip Holder 1-2 COMMAND CENTER 2-12 Configuring a Network 2-10 Connecting LAN Cable 2-5 Parallel Cable 2-6 OPERATION - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 214
Index Send as E-mail 3-25 Enabling/Disabling User Login Administration 2-27 Energy Star Program viii Error Indicator 1-2 Error Messages 6-5 F First Copy Time Appendix-7 First Print Time Appendix-8 Front Cover 1-4 FTP Settings 2-19 G Glass Platen Cleaning 5-3 GPL iv Green Knob 1-3 Grounding the - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 215
5-7 Waste Toner Box 5-7 Reserve Copy 3-19 Resolution Appendix-7, Appendix-8 S Safety Conventions ix Safety Instructions Regarding the Disconnection of Power xix SAFETY OF LASER BEAM (USA) xvii Sending Send as E-mail 3-25 Send to Folder (FTP) 3-30 Send to Folder (SMB) 3-27 OPERATION GUIDE Index - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 216
10 Printer Appendix-8 Scanner Appendix-9 Storing Information in the Address Book 220 Symbols ix T TCP/IP Settings 2-13 Toner Checking Remaining 3-61 Toner Container 1-3 Replacement 5-7 Toner Memory Slot 1-4 W Waste Toner Box 1-3 Replacement 5-7 Z Zoom Copying Auto Zoom 3-11 Manual Zoom 3-12 Preset - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 217
We recommend the use of our own brand supplies. We will not be liable for any damage caused by the use of third party supplies in this machine. A1 - Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 218
- Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 219
- Kyocera KM-5050 | 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 220
Rev.3.0 2007.11 Printed in China 302GN56014