Kyocera KM-6030 6030/8030 Operation Guide (Advanced Edition) Rev-3
Kyocera KM-6030 Manual
View all Kyocera KM-6030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-6030 manual content summary:
- Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 1
- Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 2
This Advanced Operation Guide is for models 6030 and 8030. In this guide, 6030 refers to the 60 cpm (copies per minute) model and 8030 to the 80 cpm model. NOTE: This Advanced Operation Guide contains information that corresponds to using both the inch and metric versions of these copiers. The inch - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 3
copying. 3 System Settings Covers general default settings. 4 Job Accounting Provides instructions on managing copier use among departments. Appendix Lists the copier specifications (mechanical and performance specifications and supported paper) and intercompatible functions. Includes a glossary - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 4
guides are included with this copier. Refer to the proper guide for your needs. Operation Guide Describes how to load paper, basic copier operations, and troubleshooting. Advanced Operation Guide (This Guide) Covers copying details in depth as well as default settings. Conventions in This Guide - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 5
Settings ...3-2 Weekly Timer ...3-36 Configuring MP Tray ...3-39 Registering Non-standard Sizes for Originals 3-40 Setting Document Management Defaults 3-42 Hard Disk Management ...3-49 Printing Reports ...3-50 Checking Total Copy Count ...3-53 Refreshing the Drum ...3-54 Entering Characters on - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 6
Copy Count per Department 4-14 Activating and Deactivating Job Accounting 4-18 Job Accounting Default Settings 4-19 Copying with Job Accounting ON 4-28 Appendix ...Appendix-1 Paper ...Appendix-2 Specifications ...Appendix-9 Intercompatible Functions Appendix-12 Glossary ...Appendix-16 Index ... - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 7
Copy Quantity...1-7 • Original Orientation...1-8 • Offset Mode...1-10 • Stapling...1-11 • Punching...1-13 • Combine Mode...1-15 • Booklets from Facing Pages...1-35 • Memo Mode...1-38 • Batch Scanning...1-40 • Proof Mode...1-41 • Repeat Copy...1-42 • Backing 60 • Programming Multi-Part Jobs...1-62 1-1 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 8
automatically. NOTE: You may override the automatic paper selection default. For details, refer to Selecting Paper on page 3-7. Ready User choice Auto % 100% Reduce /Enlarge Function Auto Exposure Exposure Mode Program Paper Size 11x8½ 100% Staple Off Staple Left Top Staple /Punch 2 To change - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 9
sizes which you enter and register as custom sizes. For instructions on registering original sizes, refer to Registering Non-standard Sizes sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 10
copy. Select Paper Exposure Mode Orig.Image Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program Paper Size 11x8½ 100% Up Down 1-4 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 11
(in 1/8" increments) 50 to 297 mm (in 1-mm increments) Shortcut (2 17) X " Paper Size 11x8½ 100% Back Set original on platen and scanning range. (Y side, X With metric models, you can enter the size directly using the numeric keys after pressing [#-Keys]. 6 Press [+] and [-] to specify the - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 12
.Size] ([Select Size Orig.]). Ready to copy. Select Paper Exposure Mode Orig.Image Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function 4 Select the registered custom size. y to copy - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 13
will restore the quantity to 1. APS MP tray Plain 11x8½" Plain User choice Auto % 100% Reduce /Enlarge Function Auto Exposure Exposure Mode Program Paper Size Set 11x8½" 100% 4 in 1 Staple Off Staple Left Top Staple /Punch Margin Left Sheet Erase 3 Press the Start key to start copying - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 14
mode • Page numbering • Booklets • Stapling (optional feature) • Punching (optional feature) When placing originals on the platen Originals Rear Left When placing originals in the document processor Originals Rear Left NOTE: You can change the default setting for the original orientation - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 15
Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100 you customarily tion use. User choice Function Shortcut "Select Original Image Direction." can be shown at right side of display. Follow the - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 16
orientations. The supported paper sizes are sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function 3 Press [On] ([1 set] or [Output each page]). Ready to copy. Sort/Offset Sort Offset Combine Batch Scanning 10 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 17
] and then [T Down]. 2 Press [Staple/Punch]. Ready to copy. Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100% Up Down Basic User choice Function Program 1-11 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 18
None 1 staple 2 staples Left side Right side Top side None 2 holes 3 holes Paper Size 11x8½ 100% Back Select Original Im Direction. Top Edge 5 Place the originals in the document processor or on the platen and press the Start key. If the original is placed on the platen, Scan next original - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 19
-hole punching. The metric model provides two-hole and four-hole punching. Follow the steps as below for punching. 1 Press [Function] and then [T Down]. 2 Press [Staple/Punch]. Ready to copy. Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 20
Original Im Direction. Top Edge 4 Select the hole punch position. Ready to copy. Staple/Punch Staple Punch None 1 staple 2 staples None 2 holes 3 holes Shortcut Position Left side Right side Top side Paper Size 11x8½ 100% Back Select Original Im Direction. Top Edge 5 Place the originals - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 21
Copying Functions Combine Mode Images from either two or four originals are reduced and combined onto a single copy. The page boundary of each original can be indicated by a solid or dotted line. NOTE: Combine mode is available for the copy paper sizes of A3, B4, A4, A4R, B5, B5R, 11 × 17", 11 × 8 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 22
Copying Functions 4-in-1 Mode For copying four originals onto a single sheet. This mode can be used with Duplex mode to copy eight originals onto one sheet. The orientations of the original and corresponding output are as follows. Originals Copies Orientation of Original Platen Document - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 23
Mode Orig.Image Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover original is placed on the platen, Scan next original(s) will be displayed. Place the next original and press the Start key. After - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 24
. Select Paper Exposure Mode Orig.Image Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program Paper Size 11x8½ 100% Up Down 4 Press - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 25
Copying Functions 7 Press [Auto] or [Front/Back margin]. [Auto] specifies the margin on the back side automatically based on the front margin. If you choose [Front/Back margin], use [S], [T], [W] and [X] to specify the margins. Ready to copy. Back page margin Auto - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 26
platen with the top edge facing either the rear or the left side of the copier. 2 Press [Function]. 3 Press [Margin/Centering] ([Margin/ sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 27
the widths individually to erase the borders around the edges and in the center of the book. Originals Copies • Separate Border Erase - Use this mode to specify border widths individually on all sides to erase. Originals Copies In each mode, the range for the widths are as follows. Width - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 28
sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning to erase the black borders around the edges of original such as a book. 1 Place the originals in the document processor or on the platen. - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 29
. Select Paper Exposure Mode Orig.Image Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program Paper Size 11x8½ 100% Up Down 4 Press - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 30
, you can enter the border width directly using the numeric keys after pressing [#-Keys]. Ready to copy. Border Erase None Sheet Erase Book Erase Individual BordrErase ¼ " Top ¼ " Left Ready to copy. Individual Border Erase (0 Top 2) " Shortcut ¼ " Bottom ¼ " Right Paper Size 11x8 100% Back - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 31
platen with the top edge facing either the rear or the left side of the copier. 2 Press [Function]. 3 Press [Page #] ([Page numbering]). sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 32
[Close]. Follow steps 12 to 14 when specifying the denominator for [1/n]. If not, go to step 15. Ready to copy. Select last page Auto Manual (0 -10) Page Paper Size 11x8 100% Back Select Original I Direction. Top Edge 12 To specify the total number of pages for the format [1/n], press [Select - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 33
the numeric keys after pressing [# keys] ([#-Keys]). Select denominator # (1 999) Auto Manual # keys Paper Size 11x8½ 100% Back Select Original Im Direction. Top Edge 15 original is placed on the platen, Scan next original(s) will be displayed. Place the next original and press the Start key - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 34
thick paper which is fed from a paper source other than the normal paper source. Front Cover Originals Back Cover Duplex Copy on front side Originals Duplex Copy on front side You can select not to print the first page and/or last page so that the cover is blank for both one - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 35
Orig.Image Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page sided copy No cover Add Cover Blank Front copy Back copy 2 sided copy 6 Press the Start key. If the original is placed on the platen, Scan - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 36
Image Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection scanned image as a form for copy after second original image On 4 Press [+] or [-] to adjust the exposure of the form. Choose from ten levels in 10 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 37
Copying Functions 7 Select the form from the list and press [Close]. Back Close Form Form003 dpi Up 8½x11" Form002 8½x11" Form001 8½x11 Down The arrow means direction of registered form. Set original and - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 38
booklet of two-sided copies with facing pages from one-sided or two-sided originals. A booklet staple the booklet in the center margin. If the copier is also equipped with a folding unit, you can combine a center margin with folding at the center. The following paper sizes are supported when stapling - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 39
. Select Paper Exposure Mode Orig.Image Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program Paper Size 11x8½ 100% Up Down 1-33 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 40
Booklet Edit one or two sided original pages and output a Book. Use Book Booklet for book original 4 Specify the binding direction of both the originals and finished copies. If the message It is impossible to copy in present setting mode. Change setting of original and finishing mode is displayed - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 41
with the optional document finisher, you can staple the booklet in the center margin. If the copier is also equipped with a folding unit, you can combine a center margin with folding at the center. The following paper sizes are supported when stapling the center margin or combining a center margin - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 42
Saddle Stitch Paper Size 11x17 100% Back Set the book or top side direct t 5 If the copier is equipped with the optional document finisher, [Saddle Stitch] ([Center Staple]) will be displayed and you can specify center margin stapling. If the copier is also equipped with a folding unit, you can - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 43
Copying Functions 9 Press the Start key to start scanning the original. Scan next original(s) is displayed. Place the next original and press the Start key. After scanning all originals, press [Scanning finished] to start copying. 1-37 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 44
Copying Functions Memo Mode Delivers copies with a space for adding notes. You can also copy two originals onto the same sheet with a space. NOTE: Memo mode is available for the copy paper sizes of A3, B4, A4, A4R, B5, B5R, 11 × 17", 11 × 8 1/2", 8 1/2 × 11", 8K and 16K. Layout A Reduces images - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 45
Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100% Up Down Basic User choice Ready to copy. Memo Pages original is placed on the platen, Scan next original(s) will be displayed. Place the next original and press the Start key. After - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 46
. Select Paper Exposure Mode Orig.Image Quality Sort/ Offset Basic 2 sided/ Separation Reduce /Enlarge Margin/ Centering Border Erase User choice Select Orig.Size Auto Selection Page # Cover Mode Function Combine Batch Scanning Form Overlay Booklet Program Paper Size 11x8½ 100% Up Down 3 Press - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 47
Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100% Up Down 3 Press [On]. Basic User "Start" key. The copier will remain in standby mode sided Sort Plain To change the copy quantity, press [Change Preset]. Output Left tray Change Preset Cancel If there is a problem - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 48
copier is equipped with the optional security kit. Depending on your needs, you can disable repeat copying or specify as the default Invert Staple / code. NOTE: Enter the pass code from 1 to 8 digits. If you forget the pass code, Repeat Copy will be unavailable. Take note if necessary. Basic User - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 49
jobs and review the list of registered jobs. You can view, print, and delete registered jobs. Re-Printing Jobs Follow the steps as below to output Repeat Copy jobs again. 1 Press the Repeat Copy key. 2 Select the job to repeat and press [Reprint]. Repeat Copy Job User Original Set Registration - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 50
. Use the numeric keys to enter the pass code and press [Enter]. e-print code. Clear (Enter by #key) Stop Enter 3 Check the job. Press [Print from 1st] ([Head Print]) to print the first page for reviewing. Check Details / Reprint Item User name Job name Orig. Page Set Print size Input Source - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 51
registered Repeat Copy jobs. 1 Press the Repeat Copy key. Copying Functions 2 Select the job to delete and press [Delete]. Repeat Copy Job User Original Set Registration Type Norm. Copy Norm. Copy Repeat Copy 3 Press [Yes] to delete the selected job. To delete other jobs, repeat steps - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 52
three transparencies are stacked on top of each other, static electricity may make them difficult to handle. This mode automatically inserts changed to [Transparency]. When installing the optional document finisher, you may need to specify the output destination for finished copies. For instructions - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 53
Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100% Up Down Basic User choice Ready to copy. OHP Backing Function Program Shortcut Paper Size 11x8½ 100% Back None - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 54
select Auto Rotation as the default mode. Refer to Selecting Auto be used in Auto Rotation mode. Inch models Metric models Supported Paper Sizes 11 × 8 1/2", 8 1/2 × 11" of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image specify automatic rotation. Basic User choice Ready to copy - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 55
finisher and multi-job tray. You can change the default destination for copies. Refer to Selecting Output Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi Select the output destination for finished copies. Basic User choice Function Ready to copy. Select of Output - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 56
Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100 On] to activate EcoPrint mode. to copy. User choice Function Shortcut EcoPrint mode saves toner. Output will be lighter. Program Paper Size - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 57
] and then [T Down]. 2 Press [Invert]. Ready to copy. Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100% Up Down 3 Press [On] to specify inverted copying. Basic - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 58
then [T Down]. 2 Press [Mirror Image]. Ready to copy. Auto Rotation EcoPrint Repeat Copy OHP Backing Orig. Set Direction Select of Output Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100% Up Down 3 Press [On] to specify mirror image copying. Basic - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 59
, scans originals of different sizes for automatic copying onto paper sizes matching each original. NOTE: In this mode, up to 30 originals of different sizes can be placed in the document processor at the same time. Originals of the Same Width Place all originals of the same width. The supported - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 60
is only available for metric models. The supported combinations of originals are as follows. • A3, B4, A4 and B5 • B4, A4R and B5 • Folio, A4R and B5R NOTE: Place originals flush against the document width guide toward the back of the copier. IMPORTANT: When placing the originals of different - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 61
Auto Selection Shortcut Paper Size 11x8½ 100% Back Off Auto selection Scan mixed sized originals using the Document Processor. Copy size is same as copied to same size as origina using the Document Processor See the Operation Guide for usable original sizes and procedu 5 Press the Start key to - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 62
forms, are scanned as a single original. NOTE: Place the original forms one by one in the document processor. Insert originals binding side first in Proof Copy Invert Staple /Punch Memo Pages Mirror Image Multi-Page Form Paper Size 11x8½ 100% Up Down 4 Press [On]. Basic User choice Ready to - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 63
and functions displayed on the operation panel as a single program. User choice Function Program Paper Size Set 11x8½" 100% Reg./Delete 4 in 1 Register Delete Margin Left Sheet Erase Change name and press [End]. NOTE: For instructions on entering characters, refer to Entering Characters - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 64
Paper Size 11x8½ 100% Reg./Delete Register Basic User choice Function Program Delete Change Name 3 Place the originals in the document processor or Change Name No registration 4 Enter the new program name and press [End] to register the program with the new name. NOTE: For instructions - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 65
. 3 Press the number (1 to 8) of the program to delete. User choice Function Program Delete registration Select the number of program to delete. Paper 100% Reg./Delete 4 in 1 Register Delete Margin Left Sheet Erase Change Name No registration 4 Press [Yes] to delete the program. Delete - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 66
Copying Functions Assigning Register Keys Assigns three frequently used functions listed on the [Function] screen to register keys. You can also assign functions on the [Basic] screen and the [User choice] screen. Assigning Register Keys Follow the steps as below to assign register keys. NOTE: - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 67
Deleting Register Keys Follow the steps as below to delete register keys. 1 Press a registered register key to display the assigned function. 2 Press [Shortcut] ([Register]) to display Create Shortcut (Register). Ready to copy. Combine Layout 3 Press [Delete]. None 2 in 1 4 in 1 Select item. - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 68
Copying Functions Programming Multi-Part Jobs Using job build, individual sets of originals are scanned in separate steps for a single copy job. In each step of the scanning process you can specify different settings (such as zooming and border erase) and you can specify different types of originals - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 69
[1 sided/2 sided] ([1-sided/2-sided]). Ready sided Original Type Auto % Reduce /Enlarge Quality 1 sided Copy 1 sided/ 2 sided Rear Orig. Set Direction Edit 3 Press [2 sided Copy] ([2-sided sided/2 sided Copy Finished 4 Press [Edit]. On the next screen, press [Repeat Copy]. 1 sided Copy 2 sided - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 70
setting. 10 Press [Select Paper]. Scan next original(s). Place the originals and press start key. Press "Scanning finished" key when starting copy. Job Build Step 11x8½" Select Paper Finished Basic 1 sided Original Type Auto % Reduce /Enlarge Quality 2 sided Copy 1 sided/ 2 sided Rear Orig - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 71
to the screen of step 10. Scan next original(s). Place the originals and press start key. Press "Scanning finished" key when starting copy MP tray Color 15 Place original C and press the Start key to start scanning. 2 sided copy-Left Finished page #: Next copy page: Front Back Step 5: Specify - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 72
copy. Select Paper 11x8½" Plain 11x8½" Recycled 11x17" Plain 8½x11" Plain 11x8½" Color 19 Place original D and press the Start key to start scanning. 2 sided copy-Left Finished page #: Next copy page: Front Back Step 7: Specify blank colored paper for the back cover. Specify the MP tray (for - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 73
All originals have been scanned. Press [Scanning finished] to start the job. 24 If there are no problems with the accomplished copies MP tray Color Types of Originals Select originals that are one-sided or two-sided, have facing pages like books or magazines, or are like multi-page business forms. - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 74
originals then press Start key. select the binding direction. 1 sided/2 sided Copy Follow the instructions on the right side Finished of the touch panel and confirm the orientation of the originals. 1 sided Copy Open from left 2 sided Copy Open from right NOTE: Failure to place originals - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 75
2 sided Copy 1 sided/ 2 sided Rear Orig. Set Direction Edit 1 sided copy-Left Finished page #: 2 For finishing, press [On] ([1 set] or [Output each page]) or [Off]. Refer to Offset Mode on page 1-10 for details. Ready to Job build. Place originals then press Start key. Finished Offset Staple - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 76
. Set Direction Edit 1 sided copy-Left Finished page #: 2 Select the desired magnification. Ready to Job build. For instructions on reducing/enlarging, Place originals then press Start key. refer to Reducing/Enlarging in Chapter 3 Reduce/Enlarge Back of the Operation Guide for details. Auto - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 77
4 Exposure Mode Text + Photo Orig.Image Quality Off EcoPrint 1 sided copy-Left Finished page #: Basic Quality Edit 2 For automatic exposure adjustment Job build. Place originals then press Start key. manually, press [Manual]. Next, press Exposure Mode B ack [Lighter] or [Darker - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 78
to Job build. Place originals then press Start key. Orig.Image Quality 1 sided copy-Left Finished page #: Back Text+Photo Photo Text Text+Photo:Set this Text: For copying text pages 3 Press [Close]. EcoPrint To economize toner, specify EcoPrint as follows. 1 Press [Quality]. On the next screen - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 79
Step Off Border Erase None Margin/ Centering Basic Auto Select Orig.Size None Page # Quality Off Repeat Copy Tray A Select of Output Edit 1 sided copy-Left Finished page #: 2 Select the original size. Refer to Original Size on page 1-3 for details. Ready to Job build. Place originals then - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 80
None Page # Quality Off Repeat Copy Tray A Select of Output Edit 1 sided copy-Left Finished page #: 2 Press [On] to activate Repeat Copy. Repeat Copy function, jobs can be recalled and output. Individual passwords can be set. 1 sided copy-Left Finished page #: B ack Reposition image to left/right - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 81
Off Repeat Copy Tray A Select of Output Edit 1 sided copy-Left Finished page #: 2 For instructions on page numbering, refer to Page Numbering on page : The option to select the output destination is displayed only if the copier is equipped with the optional document finisher or multi-job tray. The - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 82
Copying Functions 1-76 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 83
2 Document and Output Management Functions This chapter explains the functions used for managing original documents as well as jobs during and after copying. • Document Management Functions...2-2 • Output Management Functions...2-16 2-1 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 84
enable you to store documents (i.e., scanned images of originals) on the copier's hard disk for printing later. Documents are Document Printing Form Reg. B ox Editing 3 Press [Change Name] and enter the form name. For instructions on entering characters, refer to Entering Characters When Using - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 85
Functions on page 3-58. Item User name Document Name Size Orig. Set Direction Input Source Resolution Registration Date Details Form003 8½x11" Rear Copy 1200dpi 08/08/'04 02:29 Document Management - Form box - Box Editing Change form name Print Form 5 After reviewing the form, press [Close - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 86
Form box Document Printing Document Input Box Editing Document Printing Form Reg. B ox Editing 3 Select the form to delete and press [Delete]. NOTE: You can change the sort order of the forms. Press [Order of indication] and choose from [Sort by Date] ([New J Old] and [Old J New]) or [Sort by - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 87
Change Name] and enter the document name. For instructions Change Name Auto Select Orig.Size Auto size Select Regi. Size Basic Original 8½x11" 08/08 1 sided Original Type 100% Reduce /Enlarge Quality 4 Complete the scanning Check/Rev. Details]). Refer to Reviewing and Renaming Documents on page - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 88
58. Item User name Document Name Registration Size Orig. Set Direction page # Input Source Resolution Registration Date Details Doc003 8½x11" Rear 1 Copy 1200dpi 08/08/'04 05:41 Document Management - Shared Data Box - Box Editing Change doc. name Print from 1st 5 After reviewing the document - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 89
Input Box Editing Document Printing Form Reg. B ox Editing 3 Select the document to delete and press Box Editing [Delete]. Document Data Box NOTE: You can change the document sort order. Press [Order of indication] and choose from [Sort by Date] ([New J Old] and [Old J New]) or [Sort by Name - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 90
all documents in the Synergy Print Box as a single job. If the copier is equipped with the optional printer kit, you can also register printing data in the Synergy Print Box. For further details, refer to the Operation Guides of the printer. The Synergy Print Box holds 100 individual boxes (numbered - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 91
instructions on setting up passwords, refer to Specifying Box Passwords on page 2-14. Password Clear (Enter by #key) Stop Enter 4 Select the documents to print in the desired order and press [Finish Document Printing selecting]. You can choose up to 10 can change the scanned originals Reviewing - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 92
If a password has been set up for the box, a screen for password entry will be displayed. Use the numeric keys to enter the password and press [Enter]. NOTE: For instructions on setting up passwords, refer to Specifying Box Passwords on page 2-14. Password Clear (Enter by #key) Stop Enter 2-10 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 93
Reviewing and instructions on setting up passwords, refer to Specifying Box Passwords on page 2-14. Password Clear (Enter by #key) Stop Enter 4 Select the document to be checked and press [Document Properties] ([Check/Rev. Details]). Box Editing Doc005 1 SUN 05:46 NOTE: You can change - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 94
. Item User name Document Name Registration Size Orig. Set Direction page # Input Source Resolution Registration Date Details Doc001 8½x11" Rear 1 Copy 1200dpi 08/08/'04 05:45 Document Management - Synergy Print Box - Box Editing Change doc. name Print from 1st 6 After reviewing the document - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 95
]. NOTE: You can change the document sort order password has been set up for the box, a screen for password entry will be displayed. Use the numeric keys to enter the password and press [Enter]. NOTE: For instructions on setting up passwords, refer to Specifying Box Passwords on page 2-14. Password - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 96
touch panel will return to the Document Management screen. Specifying Box Passwords Specify passwords to maintain the confidentiality of documents stored in the Synergy Print Box. The passwords must be entered to review, print, or delete the documents. 1 Press the Document Management key. 2 Under - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 97
be from 1 to 8 digits long. If you prefer not to specify a password, press [Clear], and, without having entered any password, press [Enter]. New password Clear (Enter by #key) End Delete all Data/Box Box Password Stop Enter 6 Press [End]. The touch panel will return to the Document Management - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 98
status of these jobs just as you would from a computer using the copier's printer copy jobs, on the [Prt Status] ([Prnt Status]) screen. functions. Completed or canceled jobs are listed on the [Job History] screen. (In the list, copy jobs are indicated by , print jobs by .) You want to check - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 99
selected job from the list. 6 [Document Properties] ([Check/Rev. Details]): Displays the Check/Correct Details (Check/Revise Details) screen. From this screen, you can check the content of the selected job, change the print quantity, and so on. Check/Correct Details Item User name Job name Orig - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 100
the list, indicates copy jobs and indicates print jobs. NOTE: Jobs of which are canceled while copy operations are still in progress will not be displayed. 2 [Check Details]: Displays the Check Details screen. From this screen, you can check the content of the selected job. Check Details Item User - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 101
This chapter covers how to configure various settings of the copier using the menus on the operation panel. The main configurable settings are as follows. • Default Settings for Copying...3-2 • Common Default Settings...3-20 • Weekly Timer...3-36 • Configuring MP Tray...3-39 • Registering Non - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 102
customize the initial state of the copier to meet your needs. This section has two subsections of Default Settings for Copying and Common Default Settings. Default Settings for Copying The following settings are configured for changing the default for copying. • Exposure Mode...3-3 • Exposure Steps - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 103
optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for 60 cpm model and 80008000 for 80 cpm model. Proceed to the following sections to customize individual settings. Exposure Mode Exposure mode changes the default for how the copier adjust - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 104
Steps You can change the number of intermediate steps for manual adjustment of exposure. Selecting [1 step] provides 7 steps of slider positions. Selecting [0.5 step] provides 13 steps of slider position for finer adjustment of exposure. 1 Access the Copy Default screen. (For instructions, refer to - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 105
For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select EcoPrint and press [Change #]. System Menu / Counter Copy Default Default menu Exposure Mode Exposure Steps Original Image Quality EcoPrint Background exp. adj. System Menu Setting mode Manual - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 106
, you can lighten it. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Background exp. adj and press [Change #]. System Menu / Counter Copy Default Default menu Exposure Mode Exposure Steps Original Image - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 107
cassette is forcibly selected. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Select Paper and press [Change #]. System Menu / Counter Copy Default Default menu EcoPrint Background exp. adj. Thin Line - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 108
of the original document. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select APS Setting and press [Change #]. System Menu / Counter Copy Default Default menu Background exp. adj. Thin Line adjustment Correct - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 109
the copier is equipped with an optional side feeder. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Default drawer (Default cassette) and press [Change #]. System Menu / Counter Copy Default Default menu - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 110
to fit onto the copy paper. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Auto % Priority Setting and press [Change #]. System Menu / Counter Copy Default Default menu APS Setting Select paper type(APS - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 111
copier is equipped with the optional scanner kit. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Adjust auto exposure (OCR) and press [Change #]. System Menu / Counter Copy Default Default menu Default - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 112
and photo images. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Adj. Manual expo.(Mixed) and press [Change #]. System Menu / Counter Copy Default Default menu Default drawer Drawer for cover paper Auto - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 113
containing photo images. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Adj. Manual expo.(Photo) and press [Change #]. System Menu / Counter Copy Default Default menu Auto % Priority Setting Adjust auto - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 114
the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Sort/Offset (Sort/Group) and press [Change #]. System Menu / Counter Copy Default Default menu Adj. Manual expo.(Mixed) Adj. Manual expo.(Text) Adj. Manual expo.(Photo - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 115
for copying. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Default margin width and press [Change #]. System Menu / Counter Copy Default Default menu Adj. Manual expo.(Photo) Reduce/Enlarge Sort/Offset - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 116
and stored in the copier. You can enable or disable repeat copy and set it as the default. NOTE: This menu is not available when the copier is equipped with the optional security kit. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 3-16 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 117
the copier. For details, refer to Output Management Functions on page 2-16. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Job Queue Report and press [Change #]. System Menu / Counter Copy Default Default - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 118
]) key so that it is displayed while various operations are made on the touch panel. You can assign up to three frequently used functions listed on the [Function], [Basic] and [User choice] screens to the preset keys. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 119
preference. 1 Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on page 3-3.) 2 Press [S] or [T] to select Customize (User Choice) (Customize (Add function)) and press [Change #]. System Menu / Counter Copy Default Default menu Repeat Copy Job Queue - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 120
are the settings configured for changing the defaults of the copier. • Enabling Auto Changing Management Code...3-32 • Activating Auto Sleep...3-33 • Activating Auto Clear...3-34 • Prioritizing Copying Over Printing...3-34 • Overwriting Hard Disk Contents...3-35 Accessing the Machine Default - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 121
. System Settings NOTE: For security, it is recommended to change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 122
support the following paper types. Plain, Recycled, Preprinted, Bond, Color (Colour), Letterhead, Thick paper, High Quality and Custom 1-8 NOTE: 5th drawer (5th cassette) is available when the copier is equipped with the optional side feeder. 1 Access the Machine Default screen. (For instructions - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 123
screen when the MP tray is selected for copying. This allows to quickly configure the MP tray settings by changing paper size, etc. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Check MP tray sizing - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 124
paper types are configurable. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Select paper type(2sided) and press [Change #]. System Menu / Counter Machine Default Default menu Paper type (3rd - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 125
switching [Adj(usting). Print Direction] on, the copier correctly prints the original onto the letterhead paper when side facing up. Copying with [Adj. Print Direction] activated may be slightly slower. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 126
for metric models. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Org. Auto Detect Setting and press [Change #]. System Menu / Counter Machine Default Default menu Check MP tray sizing Paper Type - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 127
by telling the copier the direction to which the top side of the original faces. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Orig. Set Direction and press [Change #]. System Menu / Counter - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 128
specify the period after copying before the copier automatically clears the previous settings. The auto clear timeout can be set from 10 to 270 seconds in 10-second increments. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 3-28 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 129
or [-] to decrease the auto clear timeout from 10 to 270 seconds. Auto Clear Time Setting Possible to set time to automatically return to default status after Copy is done or last operation 90 Seconds Change # Back System Menu - Machine Default 4 Press [Close]. The touch panel will return to - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 130
the copier deactivate the ventilating fans for quieter operation. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Silent Mode and press [Change #]. System Menu / Counter Machine Default Default menu - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 131
Time Zone) on page 3-32. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Date/Time and press [Change #]. System Menu / Counter Machine Default Default menu Auto Clear Time Setting Select Copy output - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 132
T +09:00 System Menu - Machine Default 4 Press [Close]. The touch panel will return to the Machine Default screen. Changing Management Code You can change the management code. IMPORTANT: Be sure to make a note of the management code when it is changed. NOTE: The default management code is 6000 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 133
Machine Default Default menu Silent Mode Date/Time Time difference Management code change Auto sleep System Menu Setting mode Off 08/08/'04 07:02 GMT+09:00 On Change # 3 Select [On] to activate or [Off] to deactivate the Sleep mode. Auto sleep Back Autom. turns into sleep mode if no oper - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 134
printer kit. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Copy Job Priority and press [Change #]. System Menu / Counter Machine Default Default menu Time difference Management code change Auto - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 135
kit Operation Guide. This setting is available only if the copier is equipped with the optional security kit. 1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default Screen on page 3-20.) 2 Press [S] or [T] to select Hard Disk Overwrite and press [Change - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 136
and frees you from the task of turning it off at night. NOTE: When using the Weekly Timer, leave the copier change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 137
00-ON 17:00-OFF 08:00-ON 17:00-OFF 08:00-ON 17:00-OFF 08:00-ON 17:00-OFF 08:00-ON 17:00-OFF Change # Up Down 3 To turn on and off the copier the following day. 1 Access the Weekly timer (Week timer) screen. (For instructions, refer to Accessing the Weekly timer (Week timer) Screen on page 3-36.) - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 138
. (For instructions, refer to Accessing the Weekly timer (Week timer) Screen on page 3-36.) 2 Select [On] to activate or [Off] to deactivate the Weekly Timer. y timer week Setting mode 08:00-ON 17:00-OFF 08:00-ON 17:00-OFF 08:00-ON 17:00-OFF 08:00-ON 17:00-OFF 08:00-ON 17:00-OFF Change # Up - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 139
and the paper sizes for the MP tray. For instructions on specifying paper size, refer to Chapter 2 of the Operation Guide. Menu Unit Auto Detect Inch Centimeter Other Standard Sizes Input Size Paper Sizes Supported 11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11" and 5 1/2 × 8 1/2" A3, B4, A4 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 140
Management Print Report 3 Select one of the four custom sizes available (1 to 4). Press [Change #]. 4 Press [On] to start entering the non-standard size. System Menu / Counter Register Orig. Size Default menu Original size (custom 1) Original size (custom 2) Original size (custom 3) Original size - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 141
7 Press [Close]. 8 Press [Close]. The touch panel will return to the System Menu screen. System Settings 3-41 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 142
will be displayed. NOTE: For security, it is recommended to change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 143
System Settings Print Document List You can print a list of documents in the Form Box, Shared Data Box and Synergy Print Box. Document List, Form Box Document List, Shared Data Box 3-43 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 144
with 11 × 8 1/2" (or A4) paper. 1 Access the Document Management screen. (For instructions, refer to Accessing the Document Management Screen on page 3-42.) 2 Press [Print the list] under the specific data box. The list for the data box is printed. Document Management Document Management Shared - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 145
Print the list Reset Box System Menu Synergy Print Box Print the list Reset Box Box Editing Document save term Form box Print the list Reset Box Print Box prompts you to enter the password. 1 Access the Document Management screen. (For instructions, refer to Accessing the Document Management - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 146
Change #]. Box 001 Default menu Box name Password Setting mode (No register) System Menu - Document Management - Box Editing Change # 5 Enter the box name and press [End]. For instructions Shared Data Box Print the list Reset Box System Menu Synergy Print Box Print the list Reset B ox Box - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 147
register) Close Reset Box - Document Management - Box Editing Change # 5 Press [Yes]. All documents in the box will 1 Access the Document Management screen. (For instructions, refer to Accessing the Document Management Screen the list Reset Box System Menu Synergy Print Box Print the list Reset - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 148
System Settings 3 Press [Set saving term] ([Set save Document data saving term B ack period]). Use [+] or [-] to specify the Set saving term for documents in synergy print box. period to store the documents from 1 to 7 days. Set saving Days term To indefinitely store the documents, No - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 149
to change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for the 80 cpm model. 4 To check the free space on the hard - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 150
System Settings Printing Reports You can print the following reports using the operation panel. Copy status report Machine status report 3-50 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 151
toner coverage reports will not match the guaranteed volume given on toner containers exactly. The actual copying volume supported Press [Print Report]. System Menu / Counter System Menu Copy Default Machine Default Document Management Language MP tray Setting Register Orig. Size Job Accounting - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 152
will be displayed. NOTE: For security, it is recommended to change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 153
Total Copy Count You can read the total copy count on the operation panel. You can also print this information as a counter report. Report End Weekly timer Counter Check User Adjustment 3 The touch panel will display the total count for copying and scanning. Copy Printer To print the total - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 154
Print Report End Weekly timer Counter Check User Adjustment 4 Press [Drum refresh]. System Menu / Counter User adjustment Drum refresh System Menu 5 Press [On] to start refreshing the drum. Close Please wait approx. one minute until this e drum when image blur or white dots appear - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 155
(for job accounting) or copying programs, etc., use the following procedures. Input Screen Inch Models Keyboard 1 Name to display 6 79 10 Stop Limit:32 letters including # AllDel. End Del. prev 8 Capital Letter Num./Sym. Space 2 3 4 5 1 Character display: Displays the characters - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 156
Capital Letter Num./Sym. Space Metric Models Keyboard 1 Name to display 7 8 10 11 Stop Limit: 32 letters inc. # key AllDel. End Del. prev 9 Press this key to delete the character to the left of the cursor. 10 [Stop]: Press this key to return to the previous screen. 11 [End]: Press this - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 157
Capital keyboard Name to display System Settings Stop Limit: 32 letters inc. # key AllDel. End Del. prev Capital Letter Symbol 1 Symbol 2 Space Symbol 1 keyboard Name to display Stop Limit: 32 letters inc. # key AllDel. End Del. prev Capital Letter Symbol 1 Symbol 2 Space Symbol 2 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 158
System Settings 3 Press [b], [c], [d] and [e] in order. Name to display Abcde| Stop Limit:32 letters including # AllDel. Capital Letter Num./Sym. Space 4 When entering all characters are complete, press the [End] key. Entering Characters When Using Document Management Functions Enter text as - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 159
2 Press the [a], [b], [c], [d] and [e] keys in this order. The character display field will show abcde. Enter name. Shift 3 Press the [End] key. System Settings Limit:16 letters including # Space 3-59 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 160
System Settings 3-60 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 161
how to manage job accounting on copier use shared among various departments. • Overview of Job Accounting...4-2 • Managing Accounts...4-4 • Copy Count per Department...4-14 • Activating and Deactivating Job Accounting...4-18 • Job Accounting Default Settings...4-19 • Copying with Job Accounting - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 162
entering the management code. IMPORTANT: To restrict the number of copies, printouts or scanned images using job accounting, you must switch the Copy Job Accounting from [Off] to [On] as the default. If the copier is equipped with the optional printer kit or scanner kit, also activate Printer - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 163
be displayed. NOTE: For security, it is recommended to change the management code. Refer to Changing Management Code on page 3-32. When installing the optional security kit, enter the eight-digit management code. By default, the management code is 60006000 for the 60 cpm model and 80008000 for - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 164
ID code (of up to eight digits), account name, and restrictions on usage as desired. Access the Job Accounting screen. (For instructions, refer Edit ID-Code 11111111 22222222 -------- 1st sales division 2st sales division ETC System Menu - Job 4 Select Account ID and press [Change #]. New - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 165
screen. Use a different ID code or name. ng Item ay - Job Value Account ID 3st sales division - Management Edit Space Convert Cancel Change # Next 10 Specify restrictions on copying as desired. New register 33333333 3st sales division For instructions on restricting copier usage, refer to - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 166
the job accounting default settings (specifically, depending on whether you select [All] or [Each] for Copy/Printer Output Management). Refer to Copy/Printer Output Management on page 4-23 for details. Restricting a copier function includes the following configurations. Restricting copying: [All - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 167
the copier is equipped with the option printer kit. NOTE: Turn Printer Job Accounting [On] in the job accounting default settings Change #]. New register 33333333 3st sales division Setting Item Copy Printer Output limitation Scanner transmission Permitted Permitted No limit No limit Value Change - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 168
Image You can prohibit or restrict the number of scanned pages to transfer or e-mail to PC. This function is available when the copier is equipped with the optional scanner kit. NOTE: Turn Scanner Job Accounting [On] in the job accounting default settings to use this function. 1 Refer to steps 1 to - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 169
for Scanner transmission B ack scanning, Turn Copy Job Accounting [On] in the job accounting default settings to use this function. 1 Refer to steps Change #]. New register 33333333 3st sales division Setting Item Copy Printer Scanner transmission No limit No limit No limit Value Change - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 170
copier when it is equipped with the optional printer kit. NOTE: Turn Printer Job Accounting [On] in the job accounting default Change #]. New register 33333333 3st sales division Setting Item Copy Printer Scanner transmission No limit No limit No limit Value Change For instructions, 1st sales - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 171
1st sales division Are you sure you want to delete this Account ID? Yes No 5 Press [Close]. The touch panel will return to the Job Accounting screen. Editing Department Information Changes the name and ID code registered for the department. 1 Access the Job Accounting screen. (For instructions - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 172
on page 4-19 for details. If the copier is equipped with the optional printer kit and/or the scanner kit, activate Printer Job Accounting and Scanner Job Accounting in the job accounting default settings. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 173
code to change and press [Limit in use]. it 1 1st sales division 2 2st sales copier usage, refer to Restricting Usage Copier on page 4-6. Limit in use 11111111 1st sales division Setting Item Copy Printer Output limitation Scanner transmission Permitted Permitted No limit No limit Value Change - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 174
as necessary. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen on page 4-3.) scanner Total Counter clear Print Report Press [Report by Size] in the total count - Job Accounting by size setting of the job accounting default settings for a list - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 175
Copy/Printer Output Management of the job accounting default settings. 4 To reset the copy volume, press [Counter clear]. otal Copy Printer Total Close 5 Press [Yes]. scanner - Job Accounting Counter clear Print Report The counted number for this ID-code will be deleted Are you sure? Yes - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 176
Reports for printing errors - Printouts from computers of which the department ID-codes are not specified (if Printing from Unregistered Sources (Printer) is authorized in the job accounting default settings.) You can change the department sort order. Press [Order of indication] and choose either of - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 177
6 Press [Yes]. Job Accounting The count value of this ID-code will be deleted Are you sure? Yes No 7 Press [Close]. 8 Press [Close]. The touch panel will return to the Job Accounting screen. 4-17 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 178
activated. Job accounting is deactivated. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen on page 4-3.) 2 Select [On] [On], the screen for the department ID-code entry is displayed. When you select [Off], the [Basic] screen is displayed. 4-18 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 179
on Printing Errors...4-21 • Printing from Unregistered Sources (Printer)...4-22 • Copy/Printer Output Management...4-23 • Scanner Job Accounting...4-23 • Response to Unauthorized Requests...4-24 • Default of Copy Limitation...4-25 • Total Count by Size, 1-5...4-26 Copy Job Accounting Activate or - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 180
only if the copier is equipped with the optional printer kit. 1 Access the Job Accounting screen. (For instructions, refer to Change #]. Job Accounting Def set. Setting Item Copy Job Accounting Print. Job Accounting Printer error report Others Mgt. Reg. (print) Copy/Printer output mgt. Scanner - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 181
in case that users attempt to print using incorrect department codes. Setting On instructions, refer to Accessing the Job Accounting Screen on page 4-3.) 2 Press [Job Accntg Def. Set.]. Job Accounting Job Accountg T Register/Sett. J 3 Select Reports for Printer error report and press [Change - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 182
from computers with printer drivers that do not support job accounting. Users cannot print unless their printer driver supports job accounting. NOTE: This setting is displayed only if Printer Job Accounting is [On]. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 183
Scanner Job Accounting Activate or deactivate job accounting when the copier is used for scanning. Setting On Off Description Scanner Job Accounting is activated. Scanner Job Accounting is deactivated. NOTE: This setting is displayed only if the copier is equipped with the optional scanner kit - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 184
1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen on page 4-3.) 2 Press [Job Accntg Def. Set.]. Job Accounting Job Accountg T Register/Sett. J 3 Select Scanner Job Accounting and press [Change #]. 4 Select [On] or [Off]. Management T otal - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 185
Default of Copy Limitation Specify the default of copy limitation when registering a new department. 1 Access the Job Accounting screen. (For instructions set. [Change #]. Setting Item Print. Job Accounting Printer error report Others Mgt. Reg. (print) Copy/Printer output mgt. Scanner Job - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 186
the second entry. 1 Access the Job Accounting screen. (For instructions, refer to Accessing the Job Accounting Screen on page 4-3.) 2 specif. No specif. No specif. System Menu - Job Accounting - Job Accounting Def set. Change # 4 Press [On]. Total size 1 Can set totals of paper size and type. - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 187
Select a paper size and press [Close]. Select size Job Accounting Back A3 B4 11x17" A4 B5 8½x14" A5 Folio 8½x11" 5½x8½" Job Accounting - Job Accounting Def set. - Total size 1 6 To specify a paper type, press [Select Paper Type]. tals of paper size and type. Paper Size 11x17" - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 188
When job accounting is activated, users must enter their department ID-code on the numeric keys to use the copier. IMPORTANT: After copying, be sure to press the Job Accounting key to display the initial screen so that the next user can enter his or her department ID-code. 1 Use the numeric keys to - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 189
Appendix The appendix covers the following topics. • Paper...Appendix-2 • Specifications...Appendix-9 • Intercompatible Functions...Appendix-12 • Glossary...Appendix-16 Appendix-1 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 190
for problems that occur from the use of paper that does not conform to our specifications. Supported Paper Use standard copy paper for regular copiers or laser Specifications The following table lists the specifications of paper that is supported with this copier. Refer to the subsequent - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 191
sizes is supported by the cassettes and MP tray. Measurements in the table take into account a ±0.7-mm dimensional accuracy for length and width. Corner angles must be 90° ±0.2°. MP Tray B6R (128 × 182 mm) Postcard (100 × 148 mm) Return postcard (148 × 200 mm) Executive (7 1/4 × 10 1/2") Envelope - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 192
be supplied incorrectly or cause paper jams, which may cause excessive wear to the copier. Mixed paper weight (i.e., thickness) may cause several sheets to be supplied at once accidentally and may also cause blurring or other copying problems if the toner fails to adhere correctly. The recommended - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 193
electricity: During copying, paper is electrostatically charged so that the toner adheres. Choose paper that can be discharged quickly so that copies do not cling together. Whiteness: Paper whiteness affects copy contrast. Use whiter paper for sharper, brighter copies. Quality: Copier problems - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 194
we are not responsible for any harm to the user or damage to the copier caused by moisture or specifications of special paper. ±0.2° To avoid problems, use the MP tray for transparencies and load transparencies with the long side facing the copier. If transparencies jam frequently, try pulling - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 195
with an open or film-covered window. If paper jams occur, load fewer envelopes at once. To prevent paper jams when copying onto multiple envelopes, do paper may still have rough edges caused by a paper cutter on the back side. Remove any such rough edges just as with Postcards by placing the paper - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 196
200 °C or 392 °F). Preprinted Paper Preprinted paper must conform to the specifications listed on the page 2 of the Appendix. The colored ink must be able for calendars. Recycled Paper Recycled paper must conform to the specifications listed on the page 2 of the Appendix; however, its whiteness may - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 197
change without notice. Appendix Copier Copying System Indirect electrostatic system Originals Supported Sheets, books °F/23 °C, 50 % RH) Memory Bitmap Image Storage 128 MB 40 GB Operating Environment Temperature Humidity Altitude 10 to 32.5 °C 15 to 80 % 2,000 m maximum Power Source 120 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 198
Performance the platen) 2.9 sec or less (1:1, 11 × 8 1/2"/A4, from the platen) Scanning: 600 × 600 dpi Copying: Equivalent to 1,800 × 600 dpi 1 to 9,999 to 200 % Includes preset zoom levels Optional Side Feeder Paper Supply Method Paper Size Supported Paper Dimensions (W) × (D) × (H) Weight -10 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 199
(default) 60 cpm model 10 min 80 cpm model 15 min Time until Sleep mode (default) 60 cpm model 60 min 80 cpm model 90 min During the Plugged-In mode 0.4 wh Duplexing Standard Paper Supply Capability Supports recycled paper made from 100 % recycled pulp NOTE: Consult your Dealer or Service - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 200
mode: 2-sided J 2-sided Duplex mode: Book J 2-sided Split mode: 2-sided J 1-sided Split mode: Book J 1-sided Original size selection: Standard sizes Original size selection: Input size Original size selection: Auto detect Original size selection: Custom sizes Combine mode Auto Exposure mode Manual - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 201
selection Stapling Punching Multi-page forms Interrupt mode Primary Function YYYYYYYYYYYYYYYY YYYYYYYYYYYYYYYY Y Y Y Y Y Y Y Y Y 10 10 Y 11 Y Y Y Y Y Y Y Y Y Y Y Y 10 10 Y 11 Y Y Y Y Y 35 Y Y Y Y Y Y 10 10 Y 11 Y 15 Y Y Y Y Y Y Y Y Y Y 10 10 Y Y Y Y Y Y Y 35 Y Y Y Y Y Y 10 10 Y 16 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 202
mode: 2-sided J 2-sided Duplex mode: Book J 2-sided Split mode: 2-sided J 1-sided Split mode: Book J 1-sided Original size selection: Standard sizes Original size selection: Input size Original size selection: Auto detect Original size selection: Custom sizes Combine mode Auto Exposure mode Manual - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 203
mode is not available when the original size is selected via user entry. 33 Not available with batch scanning. 34 Not available with Interrupt mode. 35 Not available with form overlay. 36 Multi-page forms will be made into single-sided copies. 37 Not available with Offset mode. 38 Auto Selection - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 204
Power mode, the copier consumes less power than in standby mode. Auto Sleep Mode A mode designed for electrical power saving, activated when the copier is left unused conserve toner. Copies made in this mode are thus lighter than normal. MP Tray The paper supply tray on the right side of the copier. - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 205
3-20 Accessing the Machine Default screen 3-20 Activating auto clear 3-34 Activating Auto Sleep 3-33 Activating operation panel sound 3-30 Adjusting date and time 3-31 Allowing duplex copying to custom paper type 3-24 Auto detect originals 3-26 Changing management code 3-32 Enabling auto cassette - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 206
functions screen 3-18 D Default margin 3-15 Default settings 3-2 Default settings for copying 3-2 Accessing the Copy Default screen 3-3 Adjusting auto exposure 3-11 Adjusting automatic exposure for scanning text documents 3-11 Adjusting background intensity 3-6 Adjusting manual exposure: Photo mode - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 207
3-50 Toner coverage report 3-51 Restricting copying ([All]) 4-6 Restricting copying ([Each]) 4-9 Restricting number of copies to copy and print 4-7 Restricting printing ([All]) 4-7 Restricting printing ([Each]) 4-10 Restricting transferring scanned image 4-8 Restricting Usage Copier 4-6 Index - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 208
defaults 3-42 Accessing the Document Management screen 3-42 Box names 3-45 Box passwords 3-45 Deleting all documents in Box 3-46 Print document list Reviewing documents 2-6 Sheet border erase 1-21, 1-22 Side feeder Appendix-10 Specifications Copier Appendix-9 Copying performance Appendix-10 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 209
For best results and machine performance, we recommend that you use only our original supplies for your products. A1 - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 210
- Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 211
©2005 is a trademark of Kyocera Corporation - Kyocera KM-6030 | 6030/8030 Operation Guide (Advanced Edition) Rev-3 - Page 212
Rev.3.0 2007.3 Printed in China 302FB80042