Kyocera KM-8030 Kyocera Command Center Operation Guide Rev 6.3 - Page 22

COMMAND CENTER Pages • AppleTalk Name Printer > System The table below provides a summary of the items displayed on the System page. Form Feed Timeout Adjusts the timeout between 5 and 495 seconds, after which a form feed will occur in the absence of data. The default setting is 30 seconds. Emulation Selects an emulation mode. Alternate Emulation Specifies which emulation mode should be used for processing at the time data other than KPDL is received, when AUTO is selected for emulation. JPEG/TIFF Print This determines the physical size of JPEG images when printing them from a USB flash device. Choices include Fit to Paper Size, Image Resolution, and Fit to Print Resolution. XPS Fit to Page This determines the page size for printing XPS data. Turn On to fit print data over the page size; and turn Off to print in the original size. Paper Feed Mode Determines the behavior of paper feed selection when the paper you requested of size and/or type is not available in the current paper source. Auto lets the machine to search for the matching paper including all the paper sources. Fixed does not perform searching in the other paper sources. Duplex Mode Selects the default duplex mode from Off, Long Edge and Short Edge. Available on machines with the duplex printing. Copies Sets the number of copies to print. Page Orientation Switches Portrait or Landscape page orientation. Tone Sets Tone mode to Normal or Fine. The default setting is Normal. Available for some color machines. Gloss Mode Sets Gloss Mode to High or Low. The default setting is Low. Available for some color machines which support Gloss Mode. Color Mode Sets Color Mode to Black & White (Monochrome) or Full Color. Available for some color machines. KIR Mode Switches KIR smoothing On or Off. Available for some machines. EcoPrint Mode 3-15 User Guide