Kyocera KM-8030 PRESCRIBE Commands Technical Reference Manual - Rev. 4.7 - Page 106

Chapter 6 Permanent Parameters Table 6.2. Interface-independent Parameters (Sheet 2 of 7) Environment Parameter Value Factory setting 4: ETX/ACK 5: XON/XOFF recognized only as protocol Buffer nearly-full H6 threshold Percentage of the received data buffer size. 90 Buffer nearly-empty H7 threshold Percentage of the received data buffer size. 70 Total host buffer size H8 0 to 99 in units of the size defined by FRPO S5 5 (monochrome model), 10 (monochrome model with network Interface), or 12 (color model) Form feed time-out H9 Value in units of 5 seconds (0 to 99). 6 value Memory card partition I0 reading at power-upb Partition name on a memory card to be read - automatically at power-up. Maximum of 15 printable ASCII characters (20H through 7EH), enclosed in single or double quotation marks. Event log panel menu I1 0: Off 0 1: On Character width I2 0: Normal 0 1: HP LaserJet compatible Sleep timer I5 0: Off 1 1: On End-of-job I7 interpretation for option interface OPT2 Interprets EOJ given by NIC to the following: 0 0: None 1: ^L (0CH) 2: ^D (04H) 3: ^L and ^D 7: ^D and ^L End-of-job I8 interpretation for print server interface Interprets EOJ issued by print server to the 0 following: 0: None 1: ^L (0CH) 2: ^D (04H) 3: ^L and ^D 7: ^D and ^L Reduce/enlarge ratio J0 0: 100% 0 (Models supporting A3 size only) 5: 70% 6: 81% 7: 86% 8: 94% 9: 98% Status send controlc M1 0: Off 0 1: Send printer status. Default interface M2 1: Default Serial or Option Serial 2 or 3 2: Parallel 3: Default Network or Option Network 4: Option Network or Option2 Network 5: USB Host buffer moded M3 0: Automatic 0 1: Fixed First buffer size M4 Second (First)e buffer M5 size Size of the first buffer Size of the second (first) buffer 3 (model with network interface) or 5 (other) 10 (model with network interface) or 5 (other) Third (Second) buffer M6 Size of the third (second) buffer 1 size Forth (Third) buffer size M7 Size of the forth (third) buffer number 5 Fifth (Forth) buffer size M8 Size of the fifth (forth) buffer number 5 KIR mode N0 0: Off 2 2: On Duplex binding N4 0: Off 0 1: Long edge 2: Short edge Sleep timer time-out N5 time Value in units of 5 minutes: 1 to 48 [5 to 240 min.] 6 6-6