Kyocera KM-C2230 Fiery X3e 22C-KM Job Managment Guide for KM-C2230
Kyocera KM-C2230 Manual
View all Kyocera KM-C2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-C2230 manual content summary:
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 1
Fiery X3e 31C-M Color Server JOB MANAGEMENT GUIDE - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 2
of the Fiery X3e 31C-M Color Server for the supported platforms and network environments. It also includes guidelines for setting up UNIX, Windows NT 4.0/ 2000/Server 2003, and Novell NetWare servers to provide printing services to users. • The Printing Guide describes the printing and scanning - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 3
, ColorWise, EDOX, EFI, Fiery, the Fiery logo, Fiery Driven, RIP-While-Print and Spot-On are registered trademarks of Electronics for Imaging, Inc. in the U.S. or otherwise), will be limited to $50. PANTONE® Colors displayed in the software application or in the user documentation may not match - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 4
purposes in support of your use of the Software as permitted hereunder. You may not copy the Documentation. You may not attempt to localize, translate, disassemble, decompile, decrypt, reverse engineer, discover the source code of, modify, create derivative works of, or in any way change any part of - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 5
regulations, including the U.S. Export Administration Regulations, (2) you transfer to the person or entity all of the Software and Documentation (including all copies, updates, upgrades, prior versions, component parts, the media and printed materials, and this Agreement); (3) you retain no copies - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 6
Rights: Use, duplication, or disclosure of the Software by the United States Government is subject to restrictions as set forth modified or superceded, the subsequent or equivalent regulation shall apply. The name of the Contractor is Electronics for Imaging. General The rights and obligations of the - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 7
-controlled environment 1-2 Understanding job flow 1-2 Spooling, processing, and printing 1-3 Visualizing job flow 1-4 Communicating with users 1-5 What the operator should check 1-7 Overview of the job management utilities 1-8 Command WorkStation 1-8 Command WorkStation LE 1-9 Fiery - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 8
to work with Command WorkStation or Command WorkStation LE 2-22 Connecting to the Fiery X3e 2-22 Printing Fiery X3e information pages 2-24 Setting preferences 2-27 Correcting tray alignment* 2-30 Managing Fiery X3e fonts 2-32 Chapter 3: Using Command WorkStation or Command WorkStation LE - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 9
Contents Defining Mixed Media settings* 3-22 Printing FreeForm variable data documents* 3-24 Creating and monitoring and Manipulating Jobs Previewing jobs 4-1 Displaying thumbnail previews 4-1 Preview window controls 4-2 Displaying full-screen previews 4-4 Editing and merging jobs 4-6 - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 10
6-11 Finishing settings 6-14 Modifying the layout manually 6-18 Reordering pages in Layout mode 6-18 Fiery Spooler 7-1 About the Fiery Spooler window 7-3 Manipulating job options and job flow 7-4 Overriding job option settings 7-7 Job icons 7-8 Spool area 7-8 RIP area 7-9 Print - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 11
C: Troubleshooting Error messages C-1 Troubleshooting C-2 Command WorkStation or Command WorkStation LE does not respond C-2 Unexpected printing results C-3 Clearing the server C-4 Users are unable to connect to the Fiery X3e C-4 Setup error messages C-5 AutoCal error messages - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 12
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 13
, and troubleshoot problems that may arise. It describes the functions and features of the Fiery® job management utilities-Command WorkStation, Command WorkStation LE and Fiery Spooler-for the purposes of job management and quality control. NOTE: The term "Fiery X3e" is used in this manual to refer - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 14
fically used to refer to PDF data or jobs. • Printer Control Language (PCL)-A computer language designed as a page description language. The Fiery X3e uses this language to image the page, and communicate with applications and the copier/printer. • Job-A file consisting of PostScript or PCL commands - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 15
of toner deposited on a page by the copier/printer. • Process-The term "process" is used interchangeably with the term "RIP" in this manual to refer to raster image processing. • Print-The task of rendering, or imaging, a page or job on a print device. These concepts explain how the Fiery X3e and - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 16
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 17
explains the basic principles of job management in an operator-controlled print environment and provides an overview of the Fiery X3e job management utilities. Job environments The Fiery X3e supports several control levels of printing, job management, and Setup, and gives you the flexibility to - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 18
for operator access and administrator access to the Fiery X3e. For instructions on setting up passwords, see the Configuration Guide. Publish the Hold queue only-The administrator must enable only the Hold queue, not the Direct connection or the Print queue, in Setup. (For more information, see the - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 19
data tells the copier/printer whether or not to apply toner to each position on the page. Printing-After processing, the job typically moves on to the printing stage. During this stage, the raster image associated with the job is transferred from the Fiery X3e to the copier/printer at a high speed - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 20
, solid boxes indicate the types of job status flags you may see in the Command WorkStation or Command WorkStation LE Active Jobs window. Boldface items represent commands you can issue from a job management utility to release held jobs. Spooling PostScript and PCL data Spooled/Held Print Process - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 21
jobs by supplying the following information: Fiery X3e device information • The name of the Fiery X3e on the network and the names of the network servers sharing it • The IP address or DNS name of the Fiery X3e, to allow users access to Fiery WebTools™ • List of default copier/printer settings and - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 22
for the copier/printer • Available media, alternative choices, and standard tray/media configurations Printing information • Duration for jobs to be held on the Fiery X3e before deletion • Instructions for setting up the printer on client computers • Sources of PostScript printer drivers, PPDs, color - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 23
print options with jobs they send to the printer. They can also use the Instructions and Notes fields to communicate special print user-defined print options, choose Properties in Command WorkStation or Command WorkStation LE (see page 3-15), or Override Print Settings in Fiery Spooler (see page - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 24
Fiery X3e and controlling job flow • Viewing and overriding user-defined print option settings • Editing and merging job files • Tracking job activity through the Job Log Command WorkStation The most powerful of the job management utilities, Command WorkStation can be installed on a Microsoft Windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 25
11-9 Overview of the job management utilities Command WorkStation LE Command WorkStation LE allows operators and users to manage jobs from a Mac OS X computer with a network connection to the Fiery X3e. The features of Command WorkStation LE are similar to those of Command WorkStation. For - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 26
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 27
have some jobs in the Active Jobs window (jobs in the Hold queue), and can send more jobs from a nearby computer. The chapter also describes Setup functions such as printing Fiery X3e information pages, setting application preferences, and managing Fiery X3e fonts. NOTE: Unless otherwise specified - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 28
WorkStation and Command WorkStation LE. Command WorkStation 1 4 2 3 6 5 1 Menu bar (see page 2-14) 2 Job status indicators (see page 2-10) 3 Action buttons (see page 2-11) 4 Active Jobs window (see page 2-4) 5 Jobs window (see page 2-5) 6 Activity Monitor (see page 2-8) - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 29
22-3 The graphical interface Command WorkStation LE 1 2 4 3 1 Action buttons (see page 2-11) 2 Active Jobs window (see page 2-4) 3 Jobs window (see page 2-5) 4 Activity Monitor (see page 2-8) The following sections describe each component in Command WorkStation and Command WorkStation LE. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 30
WorkStation LE Server selection menu Job ticket information Active Jobs window The Active Jobs window dynamically displays the status and job ticket information of jobs that are currently being held, processed, or printed on the Fiery X3e. The title bar displays the total number of jobs and - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 31
job ticket information (see page 3-9) • Monitor jobs on multiple Fiery X3e servers* (see page 2-12) Jobs window The Jobs window displays information about jobs that have printed successfully through a connected Fiery X3e. The window is divided into four layered panels. Click the selection tabs at - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 32
Introduction to Command WorkStation and Command WorkStation LE Printed Jobs panel The Printed Jobs panel lists all jobs that have been printed from the Fiery X3e. Newly printed jobs are added to the top of the list. The Printed Jobs panel lists all printed jobs until the job limit (determined by - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 33
panel The FreeForm panel lists the names of all master files used for FreeForm variable data printing. Jobs listed in the FreeForm panel represent master files that have already been RIPped and stored on the Fiery X3e. The FreeForm panel is not available if you logged in as Guest. For information on - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 34
, processing, or printing). If the Command Workstation for the Fiery X3e is connected to more than one copier/printer, the copier/printer handling the job is listed under the job name. When no activity occurs on the Fiery X3e, the status boxes read Idle. • Error conditions-When an error occurs, the - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 35
LE, the Activity Monitor always displays the current activity on the connected Fiery X3e. Animated images provide visual indications of the job activity. Jobs being held, waiting to process, or waiting to print are not displayed. Command WorkStation Command WorkStation LE Four sections appear - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 36
total and available memory of the Fiery X3e. This section also provides the Fiery X3e name, system software version, technical support number, and copier/printer name. Job status indicators Job status indicators define the color in the Active Jobs window and Activity Monitor to indicate the current - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 37
, see the table on page 2-14. Command WorkStation Command WorkStation LE TO ISSUE AN ACTION BUTTON COMMAND 1. Select a job in the Active Jobs window or the Jobs window. 2. Click the desired Action button. When a command is unavailable in the current context, its Action button appears dimmed. Preview - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 38
the Active Jobs window, Jobs window, or Activity Monitor. A menu appears, listing the names of all connected Fiery X3e servers. 2. To display jobs for an individual Fiery X3e, choose the Fiery X3e from the list. To monitor jobs for all connected Fiery X3e servers, choose All Servers. Print jobs on - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 39
13 Customizing the graphical interface TO SELECT A LAYOUT STYLE • Choose Layouts from the Window menu, and then choose a layout style from the submenu that appears. You can choose one of three preset layouts (Default, Style 1, or Style 2) and three custom layouts. For a description of the components - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 40
in the component's title bar. TO SAVE THE CURRENT DISPLAY CONFIGURATION AS A LAYOUT STYLE IN COMMAND WORKSTATION* 1. Choose Save Layout from the Window menu. 2. In the dialog box that appears, choose the style you want to update, and, if desired, rename the style. 3. Click OK to save the new layout - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 41
the Command WorkStation LE application. Imports a job file into the Direct, Hold, or Print queue of the Fiery X3e. Imports an archived job file into the Hold queue of the Fiery X3e. Exports the contents of the Active Jobs window to a tab-delimited text file. Exports the contents of the current panel of - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 42
the current Job Log on a local printer. Prints the contents of the current window on a local printer. Closes the Command WorkStation application window. Closes the Command WorkStation LE application window. Allows you to search selected Fiery X3e servers for jobs that match certain search criteria - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 43
as well as jobs that reside in the Printed Jobs panel, FreeForm panel, or Archive panel. Archives the selected held job in the Active Jobs window, moving it to the Archive panel. Sends the selected held job in the Active Jobs window to another Fiery X3e. Cancels processing of the selected job in the - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 44
more information, see the Color Guide. Allows you to view and print a list of fonts on the Fiery X3e. In Command WorkStation, it also allows you to download fonts to the Fiery X3e, as well as delete fonts that you have downloaded. Allows you to adjust placement of the printed image on the page to - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 45
Log • Control Panel Map • Color Charts • PS Font List • PCL Font List • E-mail Log • FTP Log Command WorkStation also allows you to print the following information pages about the Fiery X3e to the local printer: • Archive Log • Queues Suspends or pauses printing on the Fiery X3e. Resumes printing on - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 46
22-20 Introduction to Command WorkStation and Command WorkStation LE Menu Window Command Layouts* Save Layout* Jobs Window Activity Monitor Submenu command Default* Style 1* Style 2* Custom 1, Custom 2, or Custom 3* Description Displays the following Command WorkStation components: • Menu bar - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 47
A CONTEXT-SENSITIVE MENU 1. Select one or more jobs in the Active Jobs or Jobs window. For details on how to select jobs, see page 3-8. 2. Right-click the selected job (Command WorkStation) or Control-click the selected job (Command WorkStation LE). When multiple jobs are selected, you can right - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 48
Choose Log in/Log out from the Server menu. The server list is displayed. 2. Select the Fiery X3e from the list of Fiery X3e servers you have connected to before. The server list displays the Fiery X3e servers you can monitor and manage from Command WorkStation or Command WorkStation LE. You can add - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 49
displays the name of a Fiery X3e, the name of the copier/ printer associated with that Fiery X3e, and a Login button. 3. Click the Login button next to the Fiery X3e name to establish the connection. 4. Select the Administrator, Operator, or Guest option, enter your password, and then click Log In - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 50
the Fiery X3e. TO PRINT FIERY X3E INFORMATION PAGES 1. In the Active Jobs window, select the Fiery X3e for which you want to print information pages. NOTE: To print information pages, you must be logged in to the Fiery X3e as Administrator. 2. Choose Print Pages from the Server menu. A dialog box - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 51
LE Local Printer options 3. For Command WorkStation, in the Select Printer area, specify where you want to print the pages. Server-The pages you specify are printed to the Fiery X3e. Local Printer-Allows you to print the Archive Log and Queues to any printer installed on your Windows computer. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 52
about the Fiery X3e. You can print the following pages from the Fiery X3e: PS Test Page/PCL Test Page-Allows you to confirm that the Fiery X3e is properly connected to the copier/printer, and provides color and grayscale samples to troubleshoot problems with the copier/printer or the Fiery X3e. The - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 53
Jobs window. 5. Click Print (Command WorkStation) or OK (Command WorkStation LE). Fiery X3e information pages printed with the Print Pages command appear in the Fiery X3e Job Log with the user name Operator, even if you logged in as Administrator. Setting preferences The Preferences dialog box - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 54
of the Activity Monitor (see page 2-9). Autologin-Instructs Command WorkStation to remember the last access level and password used to log in to each Fiery X3e. When you log in to the Fiery X3e again, Command WorkStation automatically populates the Login dialog box with the previous access level and - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 55
you to specify the destination queue (Hold or Print) for each job imported into Command WorkStation LE. Units-Specifies the units of measurement used by Command WorkStation LE to display values that you enter manually in the Job Properties dialog box. Show Animations-Enables the display of animated - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 56
IMAGES FOR PRINTING* 1. In the Active Jobs window of Command WorkStation, select the connected Fiery X3e for which you want to perform Tray alignment. If the Active Jobs window is hidden, choose Active Jobs from the Window menu to display it. 2. Choose Align Trays from the Server menu. A dialog box - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 57
: If you enter different values in A and C, the image will rotate, leading to uneven areas on printed output. If this occurs, enter the same value in A click Check Alignment to print the new alignment page. 10. To remove the alignments, select a tray and click Defaults in the Enter alignment values section - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 58
the Adobe PS printer driver, click the Fonts tab and set up the Font Substitution Table, as necessary. To print a list of fonts currently resident on the Fiery X3e, use the Print Pages command (see page 2-24). TO MANAGE FONTS 1. In the Active Jobs window, select the connected Fiery X3e for which you - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 59
Fonts from the Server menu. Command WorkStation Locked fonts Downloaded fonts Click to update the Font List display Click to download additional fonts Click to delete font(s) Click to print the Font List Command WorkStation LE Click to print the Font List 3. Select the PostScript or PCL option - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 60
printer fonts included with the Fiery X3e Print (Command WorkStation) or Print List (Command WorkStation LE). TO ADD FONTS IN COMMAND WORKSTATION* 1. In the Select Files to Import dialog box, choose the file types to display from the File of type menu. All Known Formats lists all files in supported - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 61
the name of the selected file. 3. Select the font name and click Add. You can navigate to different drives and folders to select fonts to download. To select multiple sequential fonts, select the first font and Shift-click the last font. Ctrl-click to select multiple non-sequential fonts. To remove - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 62
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 63
>Fiery (Windows XP/Server 2003 only), and then choose Command WorkStation 4. When you start Command WorkStation for the first time, the Login Server list does not display any Fiery X3e servers. For instructions on configuring and adding Fiery X3e servers to the Login Server list, see the User Software - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 64
first time, the server list does not display any Fiery X3e servers. For instructions on configuring and adding Fiery X3e servers to the server list, see the User Software Installation Guide. Logging in to the Fiery X3e To establish a connection to the Fiery X3e listed in the server list, log in to the - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 65
33-3 Starting up and logging in TO LOG IN TO THE FIERY X3E 1. From the Server menu, choose Log in/Log out (Command WorkStation) or Login/ Logout (Command WorkStation LE). The server list appears. The Fiery X3e must appear in the server list before you can log in to it. Command WorkStation Login - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 66
-4 Using Command WorkStation or Command WorkStation LE 2. Click the Login button for the desired Fiery X3e. The Login dialog box appears. Command WorkStation Command WorkStation LE A white key icon indicates the Fiery X3e has never been connected to Command WorkStation or Command WorkStation LE. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 67
access. 3. Select the Administrator, Operator, or Guest option, enter your password, and then click Log In (Command WorkStation) or Login (Command WorkStation LE). This manual assumes you are logged into the Fiery X3e as Operator. The following section discusses the three different access levels in - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 68
, the levels of access are dependent either on the Fiery X3e currently selected in the Active Jobs window or on the Fiery X3e that holds the currently selected job. By default, no passwords are set on the Fiery X3e-in this default state, anyone can perform Setup and use all Command WorkStation - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 69
a single Fiery X3e or multiple Fiery X3e servers (see page 2-12). You can also sort job lists and customize the job ticket information that is displayed. The Active Jobs window displays jobs as they pass through the various stages of spooling, holding, processing, and printing. Flag colors indicate - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 70
a job allows you to apply job management commands (from the Actions menu) to it. TO SELECT A JOB • In the Active Jobs window or in any panel of the Jobs window, click a job to select it. To select additional jobs in Command WorkStation, hold down Ctrl and click the desired jobs; to select - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 71
Fiery X3e location of individual jobs. In Command WorkStation, the information in the Date/Time column is based on the date and time settings of the Regional Settings control panel. You can access the Regional Settings control panel from the Start>Settings>Control (Active Jobs window only), Job - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 72
JOB TICKET INFORMATION FOR THE ACTIVE JOBS OR JOBS WINDOWS IN COMMAND WORKSTATION LE† 1. Control-click the heading of a job ticket column. 2. Choose Edit Visible Columns from the menu that appears. 3. In the List Editor dialog box, specify - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 73
box appears Guide). If you choose Hold, the job is imported into the Active Jobs window and held for future action. If you choose Print, the job is imported into the Active Jobs window and released for immediate printing. If you choose Direct, the job is sent directly to the Fiery X3e for printing - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 74
File menu, and then choose Job or Archived Job. 2. Locate and select the job file to import and click Open. 3. If the Import Options dialog box appears, specify the desired destination queue, and then click OK. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 75
guration Guide). If you choose Hold, the job is imported into the Active Jobs window and held for future action. If you choose Print, the job is imported into the Active Jobs window and released for immediate printing. If you choose Direct, the job is sent directly to the Fiery X3e for printing. The - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 76
, and holds a copy of the job. The copied job is marked with the processed/ held flag. Held on the Fiery X3e hard disk drive indefinitely Prints the selected job in the Active Jobs window, Printed Jobs panel, or Archive panel, and holds a copy of the job. The copied job is marked with the processed - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 77
the jobs in the Active Jobs window or Printed Jobs panel. 2. Choose Properties from the Actions menu. The Job Properties dialog box appears. This dialog box displays all the job settings encoded by the PostScript printer driver that can be decoded by the Fiery X3e. If you, as the operator, have - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 78
33-16 Using Command WorkStation or Command WorkStation LE In Command WorkStation LE, the print settings of a selected job appear in two columns. Command WorkStation Command WorkStation LE - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 79
as the user sent them. NOTE: Some print options available in the printer driver are not displayed in the Job Properties dialog box. For information about specific print options and settings, and where you set them, see Appendix A of the Printing Guide. 3. To override a setting, expand the blue bar - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 80
WorkStation LE Command WorkStation LE Indicates reRIPping is required 4. In Command WorkStation, to print the current list of print settings on a local printer, click Print Properties. 5. To apply the print setting overrides to the selected job, click OK. Reordering jobs* If you are logged - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 81
only reorder jobs that are waiting to process. 3. Select the desired job in the list, and use the buttons on the right of the dialog box to reorder the job's priority. 4. Click Done when you are finished reordering the job priority. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 82
12. • With servers that support the feature, use the "Send to" command to transfer jobs between servers. For example, by viewing print jobs on all connected servers in the Active Jobs window, you can monitor the print load on each Fiery X3e in your printing environment. If one Fiery X3e has received - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 83
may include pages with one or more missing color plates, or pages that are completely blank. • Pausing all jobs on the Fiery X3e-Choose Suspend Printing from the Server menu to suspend the printing of all jobs on the Fiery X3e. To continue printing jobs, choose Resume Printing from the Server menu. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 84
the Printing Guide. NOTE: Inserted blank media between pages are not charged as printed pages. TO DEFINE MIXED MEDIA SPECIFICATIONS* 1. In Command WorkStation, select a spooled/held job in the Active Jobs window, and choose Mixed Media Setup from the Actions menu. The Mixed Media dialog box appears - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 85
specifications as needed. Page ranges not specified as mixed media will print on the media defined by the Paper Source settings. 7. In the dimensions (for example: all Letter, all Tabloid, or all A4). 8. Click OK. The Job Properties dialog box appears. 9. Click OK to close the Job Properties dialog box - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 86
is especially important for variable data printing with FreeForm. Although the Fiery X3e can store up to 100 FreeForm masters, users are limited to a range of 1 to 15 values that they can specify for the Create Master and Use Master print settings from the printer driver. To make use of all 100 - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 87
master numbers 1 through 15 to avoid any overwriting problems. Only the Operator can assign numbers from 16 to 100, enabling a high level of control over the FreeForm master numbers in use. TO CREATE A FREEFORM MASTER 1. In the Active Jobs window, select the held job comprising the master elements - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 88
the operator can specify master numbers between 16 and 100, with job overrides from the Job Properties dialog box. TO OVERRIDE THE USE MASTER PRINT SETTING 1. In the Active Jobs window, select the held job comprising the variable elements of the document, and choose Properties from the Actions menu - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 89
jobs sent to the Fiery X3e, users should specify information (such as the desired FreeForm master number) to the operator using the Notes and Instructions fields in the Printer Job Notes dialog box. NOTE: When specifying additional print settings for FreeForm jobs, certain print option settings must - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 90
Delete • Rename • Hold • Process and Hold • Print and Hold • Remove Raster Data • Properties TO ARCHIVE A JOB 1. In the Active Jobs window, select any held job. 2. Choose Archive from the Actions menu. 3. To archive the job internally to the Fiery X3e hard disk drive, click OK. The job is archived - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 91
Workstation LE). The Archive Options dialog box displays external devices as available archive volumes rasters in the Archive Options dialog box. The Archive rasters option is not on the Archive rasters option so that the merged job prints correctly after you archive and restore it. NOTE: Large - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 92
Job Log helps improve the performance of the Fiery X3e. The administrator can also choose the Job Log page size. For more information, see the Configuration Guide. NOTE: If a job was saved from the Imposition window of DocBuilder Pro with a new name and then printed, it appears in the Job Log with - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 93
box appears. 2. Specify your local printer settings and click OK. NOTE: For information on how to print the job log from Command WorkStation LE, see "Printing Fiery X3e information pages" on page 2-24. TO EXPORT THE JOB LOG 1. If it is not already displayed, click the Job Log tab on the Jobs window - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 94
job file names or dates of creation. Use the Find command to search for jobs that appear in the Active Jobs window and in the Printed Jobs, Archive, FreeForm, and Job Log panels of the Jobs window. In Command WorkStation, you can also perform advanced searches based on the file sizes and speci - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 95
WorkStation LE 2. In Command WorkStation, choose a specific Fiery X3e, or all Fiery X3e servers from the Search Server list. 3. Select one or more areas where you want to search for jobs. You can search for jobs in the Active Jobs window and in the Printed Jobs, Archive, FreeForm, and Job Log panels - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 96
dialog box (Command WorkStation LE) lists found jobs. In Command WorkStation, you can customize the appearance of the Search Results window in the same manner as the Active Jobs and Jobs windows. For example, you can display jobs on all connected Fiery X3e servers or on a selected Fiery X3e (see - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 97
menu. The Find dialog box appears. 2. Choose an option from the Search Server menu to search for jobs on a specific Fiery X3e, or all connected Fiery X3e servers. 3. Select one or more areas to search for jobs. Search for jobs in the Active Jobs window and in the Printed Jobs, Archive, FreeForm, and - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 98
jobs that have certain print options, click the selection box for each desired print option in the list. punching specified. NOTE: To clear all fields in the Find dialog box at any time, click New Search. 5. Click Search to find the jobs that meet the specified search criteria. The Search Results window - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 99
33-37 Searching for jobs TO REUSE A FIND TEMPLATE 1. In the Find dialog box, choose the desired template from the Queries menu. The dialog box is automatically populated by the search parameters associated with the template. 2. Click Search (Command WorkStation) or Find (Command WorkStation LE) to - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 100
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 101
and merging features of the Preview windows are not available for PCL files or any job sent with the PCL printer driver. NOTE: DocBuilder Pro allows you job and choose Preview from the Actions menu, a preview window opens, displaying thumbnail images of the selected job. TO VIEW THUMBNAILS OF A JOB - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 102
44-2 Previewing and Manipulating Jobs Preview window controls The following illustrations show the various controls (represented by icons) that are available in the Preview window. Each control is described in more detail elsewhere in this chapter. Command WorkStation Full-screen Preview Save - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 103
PDF file, the phrase " appears at the end of its filename and a lock icon appears in the upper right corner of the Preview window. You can not edit locked PDF files. Lock icon - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 104
as a full-screen image for a more detailed inspection. NOTE: Full-screen previews are not supported for FreeForm jobs. TO VIEW A FULL-SCREEN PREVIEW OF A JOB • Select a page in the Preview window and click the Full-Screen Preview control (see page 4-2). NOTE: The full-screen preview may take a few - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 105
WorkStation LE Thumbnail Zoom In Zoom Out Rotate (90, 180, or 270 degrees) Scroll bar (to view other pages) Next Page Previous Page Use the controls (represented by icons) in the full-screen preview to change the zoom level, rotate the page, display other pages, or return to the thumbnail preview - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 106
select multiple, non-sequential pages. 4. Apply the desired edits. To apply edits to the selected page, click any of the controls that appear under the title bar of the Preview window (for an illustration, see page 4-2): Full-Screen Preview-Opens a full-screen preview of the selected page (see page - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 107
and merging jobs 5. To move pages within the Preview window, click to select the pages, and hold down the after last page Move multiple pages after last page 6. When you finish making edits, click the Save control (see page 4-2) to save the job. 7. Enter a new name for the editing job and click - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 108
print settings desired for final output. For example, to create a merged job that prints window. NOTE: To merge pages, both jobs must reside on the same Fiery X3e. NOTE: In Command WorkStation LE, choose Cascade Preview Windows or Tile Preview Windows from the Windows menu to display preview windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 109
44-9 Editing and merging jobs 3. In the source document Preview window, click to select the pages, and hold down the mouse button as you drag the selected pages to the new location in the destination document Preview window. Command WorkStation Source document preview Destination document preview - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 110
pages. • To add pages, drag the pages to a new position between pages, before the first page, or after the last page in the first Preview window. Moving the selection to the left or right of a page places the selection in that location and renumbers the pages. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 111
preview pages on top of pages in the first Preview window. Moving the selection over an existing page replaces the existing To replace pages in Command WorkStation LE, you must manually delete the unwanted pages. • In Command WorkStation, the control to undo all the way back to your first edit. There - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 112
additional pages from another source job, open a new job (resident on the same Fiery X3e) in a Preview window. Repeat step 3 to merge pages from the new source job. 5. When you have finished merging pages, click the Save control (see page 4-2). 6. Enter a new name for the merged job, and click Yes - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 113
to apply imposition layouts to jobs for special printing and binding needs. DocBuilder Pro also provides service/support technician. NOTE: DocBuilder Pro is not supported for Command WorkStation LE. Previewing, editing, and merging jobs With the DocBuilder Pro option, you can use the Preview windows - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 114
the full-screen preview for a spooled/held PostScript or PDF job, you have access to three additional preview controls, as shown in the following illustration. Move preview around in window Magnify preview (hold down Ctrl to zoom out) Click to edit page content Editing page content-Edit the contents - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 115
a dongle on your workstation. If the dongle is not attached, an error message appears. For more information, contact your authorized service/support technician. To impose a processed/held job, select the job in the Active Jobs window and choose Remove Raster Data from the Actions menu to put the job - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 116
appears while the job is imaged for the Imposition window. When it opens, the Imposition window displays the job. No layout is applied unless the job has been previously imposed. Templates for common layouts are provided and can be invoked from the Imposition window, as described in "Using templates - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 117
order they are intended to be read. Note that the Preview windows in Command WorkStation image jobs as reader's spreads. Printer's spread Reader's spread The paper used to print a printer's spread is known as a sheet. In duplex printing, each sheet has two imageable surfaces-one on the front side - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 118
the icons and menus at the top and bottom of the Imposition window to perform the following: • Switch from Preview mode (thumbnails of actual content) to Layout mode (page numbers only). • Switch between Mixed Page mode (document with - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 119
grouped in the Sheet, Layout, Scale, and Finishing panes at the left of the window. To expand or collapse a pane of settings, click the bar for that pane. The Surface menu, View menu, and scroll bar appear at the bottom of the window. These menus and controls affect the display in the Imposition - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 120
view of the job. • Preview mode-approximates the appearance of the final printed output very closely; for this reason, it is sometimes called a WYSIWYG ("what a layout view. Different viewing modes may display different sets of printer's marks; for more information, see the following table. NOTE: - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 121
to 800%. You can also choose to make the current preview fit in the window. In addition to preset zoom percents, you can specify a custom zoom value. TO down to a minimum of 12%. 4. Right-click the page in the Imposition window. Select Zoom In or Zoom Out from the menu that appears. Zoom In doubles - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 122
, change the Scale area settings. TO SPECIFY A CUSTOM ZOOM VALUE 1. Click the View menu at the bottom of the Imposition window. The current zoom value appears in the Zoom dialog box. 2. Specify a new zoom value. Enter a new zoom value or select a value from the menu. 3. Click OK or press Enter to - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 123
to make a particular portion of the preview visible. TO USE THE SURFACE MENU 1. Click the Surface menu at the bottom of the window. When the Go To Surface dialog box appears, the Surface field indicates the number of the sheet surface currently displayed. 2. Enter the number of the sheet surface to - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 124
layout and printing settings quickly and efficiently. DocBuilder Pro supplies built-in templates that define settings for commonly used layouts, such as 2-Up Saddle, 3-Up Trifold Brochure, 4-Up left corner of the Imposition window. The new settings take effect immediately. Save template Delete template - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 125
of the original spooled source file appears with a new extension (.dbp). If you mistakenly close the Imposition window when you intend to keep working, click Cancel in the Save As dialog box. The original PostScript or PDF file remains intact, even after the converted file has been edited and saved - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 126
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 127
that are all the same size. Mixed Page mode-allows you to impose documents that contain pages of different sizes. When you open the Imposition window for a document that contains different page sizes, Mixed Page mode is selected automatically; you cannot switch to Fixed Page mode. When you open the - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 128
66-2 Advanced Features of DocBuilder Pro Settings panel Layout Scale Finishing Setting Rows/Columns Printer's Marks Printer's Marks: Pull into Page Edge Bleeds Apply To Scale Mode Alignment/Offsets Binding Gang Up Available in Fixed Page mode Yes Yes No Yes Not - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 129
on the left side of the main window. To view or hide a settings pane, click the bar for that settings group. Click to view or hide the settings panel NOTE: You can change the default unit of measurement for all input fields in the Command WorkStation Preferences dialog box. You can also specify any - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 130
the currently selected copier/printer's PostScript printer description (PPD) file. To choose a custom size, enter the width and height of the custom page. If you do not specify units for your custom size values, DocBuilder Pro uses the default units specified in the Edit >Preferences dialog box. When - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 131
, or the equivalent in another measurement unit) to specify window, as described in "Rotating pages" on page 6-22. Duplex Use the Duplex menu to specify the relationship of content areas on opposing sides of a sheet. Specify On for duplex (two-sided) printing or Off for simplex (one-sided) printing - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 132
, ordering, and rotation of page images on the sheet. DocBuilder Pro supports layouts of up to 25 pages columns allow gang printing; however, only Gang Up layouts in the 5x5 matrix support imposition. NOTE: If value are reflected immediately in the main window, whether you are in Layout or Preview - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 133
value are reflected immediately in the main window, whether you are in Layout or Preview mode are canceled. Printer's Marks Select Printer's Marks to add trim, fold, and background information on printer's marks, see page A-4. NOTE: Not all layouts display all of the Printer's Marks. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 134
according to the job, DocBuilder Pro allows you to define the set of printer's marks displayed. For example, ganged-up business cards do not require fold marks, Define and choose options in the Define Marks dialog box. The Define Marks dialog box allows you to enable or disable trim marks, fold marks, - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 135
(dotted or solid), width (from 1 to 3 points), and color. NOTE: The Printer's Marks option enables marks globally throughout a job. To disable or enable an individual mark, press the Ctrl key and click the mark directly in the imposition window. Disabled marks are indicated by an "X". Ctrl-click to - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 136
66-10 Advanced Features of DocBuilder Pro Non-imageable area Trim marks Image Bleeds The Bleeds option moves the trim marks into the image by the amount you specify to ensure that the printed area extends beyond the edge of the trimmed sheet. To specify horizontal and vertical bleed amounts for a - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 137
fic slots on sheets. The number of slots on a sheet depends on the Rows and Columns values. The slot size is determined by dividing the maximum imageable area of the sheet by the number of slots. Current Slot-Applies scaling to the currently selected page. Row on All Surfaces-Applies scaling to - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 138
-Scales page(s) to best fill the slot without printing past its edge. Scale to fit is the default mode. Custom-Enables the Scale Factor and Finished Height you supply scaling values that would cause the page to print past the edge of the sheet, DocBuilder Pro provides a visual warning. When the window - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 139
you can align the page to the upper-left corner of the slot by clicking the Alignment control corresponding to that position. Click to specify upper-left alignment Page is aligned in slot You are calculated in reference to the alignment position, and reset to zero when you specify a new alignment. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 140
can specify binding and gang printing settings. Binding To enable binding settings and disable gang printing, select Binding. When binding the booklet. The booklet reads from left to right. Right Edge-Specifies binding across the right edge of the booklet. The booklet reads from right to left. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 141
more prevalent (see page A-8). DocBuilder Pro shifts images on the page to compensate automatically for creep, according printed on a single sheet; thus, gang printing is commonly used as a means of saving paper when printing small jobs on copier/printers that use large sheets, and when printing - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 142
Repeat option enables what is commonly known as "step-and-repeat" printing. Step and repeat is most often used when printing multiple copies of a single document; for example, when printing business cards, you print multiple copies of the same image to fill a larger sheet. Unique-Places pages in an - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 143
the correct order when the sheets are stacked and cut. This option minimizes the need for collating by hand and is most appropriate for printing single copies of a document. 12-page document 1 2 3 4 5 6 7 8 9 10 11 12 2 x 2 Unique-Collate Cut, Duplex off 14 25 36 Collate sheets 7 10 8 11 9 12 - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 144
from the source document that DocBuilder Pro images in a designated position on the finished sheet. However, to reorder individual pages manually, arrange them in the main window. To assign a different page to cover page by typing 0 (zero) for any page number. Page 0 will be printed as a blank page. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 145
66-19 Modifying the layout manually NOTE: When you use this procedure to reorder pages, the page number you enter overwrites the original. For example, if you typed page 3 in place - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 146
OK. TO DELETE SHEETS 1. Right-click a sheet in Preview or Layout mode and choose Delete Sheet(s) from the menu that appears. The Delete Sheet(s) dialog box appears. 2. To delete a single sheet, select Delete Sheet and specify the number of the sheet you want to delete. To delete a range of sheets - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 147
66-21 Modifying the layout manually Editing page content You can use the Enfocus PitStop software (installation instructions included with the DocBuilder Pro option) to edit the content of pages in a job. PitStop functions as a plug-in that adds enhanced PDF editing tools - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 148
. You are prompted to save the changes. 5. Click Yes. 6. Click the Command WorkStation window to bring it to the foreground. The edited file appears in the full-screen preview window. Rotating pages To manually rotate individual pages or sets of pages in a job, display the job in Layout mode and - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 149
66-23 Modifying the layout manually TO ROTATE PAGES 1. To rotate a single page, click the Rotate icon on that page. 2. To rotate all pages in the job, press the Shift and - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 150
the margin (the area between the outside edge of a group of imposed pages and the edge of the sheet) is a function of the particular copier/printer associated with the job. You cannot define custom margins. Managing templates You can name and save the current combination of Sheet, Layout, Scale, and - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 151
Save template icon. Name of current template Save template Delete template 2. Type a name for the settings file in the Save Template As dialog box. When saving a template, choose a descriptive name, such as "4-Up Nested Saddle." If you plan to use the same template for a particular document, name - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 152
it is saved to the Fiery X3e under the name you specify in the Save As dialog box. The default name that appears in the Save As dialog box is that of the original and saved in the Imposition window. • If imposition data has changed, the data is saved to the Fiery X3e and associated with the new - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 153
66-27 Tips for using the Imposition feature of DocBuilder Pro TO SAVE AN IMPOSED JOB 1. Click the Close Window icon in the upper right corner of the DocBuilder Pro window. 2. Enter a name for the imposed job in the Save As dialog box. 3. Click Yes. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 154
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 155
over the Internet or an intranet. Fiery Spooler is installed from the User Software CD, and is available for Mac OS computers only. To use Fiery Spooler, users need only a network connection to the Fiery X3e. Tracking and managing jobs with Fiery Spooler Use Fiery Spooler to perform the following - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 156
Double-click the Fiery Spooler icon. 2. Select the Fiery X3e in the Chooser window. For information on setting up the connection to the server, see the User Software Installation Guide. 3. Click OK. 4. Log in to the Fiery X3e. • To log in as Administrator, enter the Administrator password and click - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 157
you to view Fiery X3e and copier/printer functions, and acts as an interface from which you can control those functions. The Fiery Spooler window is divided into three areas by Spool, RIP, and Print status bars. When the Fiery X3e receives print jobs, the Fiery Spooler window becomes a dynamic - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 158
-click the job. Note that you cannot check the job properties or hold a job with an error. NOTE: If your job does not appear anywhere in the Fiery Spooler window, it may have already printed; if so, it appears in the Job Log. To view the Job Log, choose Show Job Log from the - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 159
commands has on a job, you must understand the way the Fiery X3e handles PostScript, PCL, and raster data, and how jobs are data). Keep the printed job in the Print area until the job limit is reached. Temporarily held on the server until the job has completed printing Print the job in its - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 160
as the processor and copier/printer are free, before other waiting jobs. Remove the raster from a job that has raster data; leave the PostScript or PCL job in place. Change the print options for the job (see page 7-7). Open the selected held raster data job in the Thumbnail A window, where you can - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 161
77-7 Tracking and managing jobs with Fiery Spooler Overriding job option settings To change the job options of a job, select the job and choose Override Print Settings from the Job menu. Click the tabs in the Override Print Settings dialog box to see all the job options. NOTE: If an icon appears to - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 162
77-8 Fiery Spooler Job icons Three types of icons are used for both active jobs and jobs on hold. Icon Printer icons Raster icon Active jobs (white icons and rows) PostScript, PCL, or raster data headed for printing (top) or after printing (bottom) PostScript, PCL, and raster data after printing, - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 163
hold defined How long you see the job Until it is deleted, moved to the Archive window, or stripped of its raster data and sent to the Spool area Until copier/printer is free to print the job After a job is rasterized, it goes into the RIP area. The RIP area holds only - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 164
that have already been printed. These jobs were assigned the Print destination (white printer icon in the Spool or RIP areas) without any Hold instructions; therefore, they all have white icons. NOTE: A job row that appears in light red indicates that an error occurred while printing the job. To see - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 165
and merging jobs Previewing, editing, and merging jobs Fiery Spooler includes two thumbnail windows that allow you to preview and edit raster data. You can use the thumbnail windows in the following ways: • In Thumbnail A, you can view the currently printing job as it is RIPping, or any raster data - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 166
tab at the right of the Fiery Spooler window. 2. Click the RIP preview icon at the left side of the Thumbnail A window. In this mode, Thumbnail A Click to close the thumbnail window 3. Choose a PostScript file in the Spool or Print area and select RIP and Hold, Print, or Print and Hold. As pages are - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 167
many pages, it may take some time for the entire job to be displayed. Click to open a full-screen preview Click to close the thumbnail window 3. When you have finished viewing, click the Thumbnail A or Thumbnail B tab to close the thumbnail - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 168
77-14 Fiery Spooler Displaying full-screen previews You can open a full-screen preview of any page in the Thumbnail A window. The full-screen preview page in Thumbnail A. NOTE: If you have edited a job using the thumbnail windows, you must save the edited file before you can view full-screen previews - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 169
the merged file, which has references to the original PostScript files. Before editing or merging raster files with the thumbnail windows, make sure the source files were RIPped using the print option settings you want for the final output. TO VIEW AND EDIT RASTER DATA JOBS 1. Select a raster data job in - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 170
77-16 Fiery Spooler Delete-Deletes the currently selected pages. Duplicate-Duplicates the currently selected pages. Preview- must be the same. Before editing or merging raster files with the thumbnail windows, make sure the source files were RIPped using the print option settings for the final output. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 171
77-17 Previewing, editing, and merging jobs 3. In Thumbnail B, click to select the pages and hold down the mouse button as you drag the selected pages to the new location in Thumbnail A. Shift-click to select multiple, sequential pages; Ctrl-click to select multiple, non-sequential pages. To scroll - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 172
thumbnail window results in a message indicating zero pages, close and restart Command WorkStation, Command WorkStation LE, or Fiery Spooler. Using the Job Log From Fiery Spooler, you can view and print a log of all jobs printed by the Fiery X3e, including jobs downloaded with Fiery Downloader. NOTE - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 173
, editing, and merging jobs TO DISPLAY, UPDATE, PRINT, DELETE, AND SAVE/EXPORT THE JOB LOG 1. Choose Show Job Log from the Fiery Spooler Window menu. 2. Select All or specify a date range. 3. Click OK. The Job Log appears in a new browser window. NOTE: The Delete button appears only if you - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 174
print the Job Log, choose Print Job Log from the File menu or click the Print button. The information displayed in the Job Log window prints to the current Fiery X3e. When you print the Job Log, totals are printed Log window reappears. You can view the information in any application that can read a - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 175
to a different Fiery X3e using the following procedure. TO CONNECT TO A DIFFERENT FIERY X3E 1. Choose Open Fiery from the File menu. 2. Select the Fiery X3e in the Chooser window. For information on setting up the connection to the server, see the User Software Installation Guide. 3. Click OK - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 176
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 177
its pages in the correct order and orientation for printing and a variety of binding styles. You might have used a service bureau to access high-volume, high-resolution color printers. However, DocBuilder Pro, teamed with digital color copier/printers, now makes it cost-effective to produce short - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 178
supports are digital color copiers, rather than traditional printing presses. In this manual, the paper on which a job is imaged is referred to as the sheet. The printed positioning on the sheet must differ from the normal book-reading order. You can demonstrate this for yourself using an ordinary - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 179
the fold). 4. Page through the booklet as if you were reading it, and number each page sequentially. Number the front and printing. Not all copiers support duplex printing; and of those that do, variations in implementation exist. DocBuilder Pro supports duplex printing that corresponds to the print - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 180
in planning a print job. The folding the tedious and error-prone process of image on a sheet. DocBuilder Pro simplifies this process even further by providing predefined layouts for common impositions such as booklets and brochures. You can also save your own custom layouts for easy reuse. Printer - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 181
and bleeds (extensions of content beyond a trim mark; used to ensure that the printed area extends to the very edge of a trimmed page). DocBuilder Pro makes it easy to set up gutters and specify a set of printer's marks to image on the finished sheet, as shown in the following illustration. Job label - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 182
the job. For example, a book is often composed of more pages than can be printed on a single sheet. When the number of pages in the book is a multiple or between chapters. To insert blank pages, open the job in the Thumbnail A window, right-click the page you want to add the blank to (or pull down - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 183
ficient, but is more suitable for small booklets than for large jobs. (A rule of thumb is that saddle stitch binding works best for booklets or brochures with a maximum of 88 pages.) Conversely, perfect binding is more expensive but more suitable for larger jobs. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 184
Pro, it takes only moments. Shingling and creep All books and brochures use a sheet that is folded to create separate page areas. Because the bound pages resolves only half of the problem, however-as the edges of pages move, so do the content areas imaged on them. The apparent shift of content area - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 185
, for example, how you might approach the task of printing business cards. It is slow, wasteful, and expensive to print a single business card per sheet, when you can repeat the image of the business card until the entire sheet is filled. This printing technique is known as Gang Up Repeat because the - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 186
if the jobs do not fit easily into a simple multiple of sheets. A more efficient approach is to print several jobs on a single sheet, and then print that sheet as many times as required. The technique of printing multiple jobs on the same sheet is known as Gang Up Unique. DocBuilder Pro provides both - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 187
-in templates provided with DocBuilder Pro. 1-Up Full Bleed The 1-Up Full Bleed layout is used to print one page per sheet. The printer's marks indicate where to cut the paper so that the color content extends to the edge of the paper. The following settings are applied for this layout: • Bleeds - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 188
and stacked on top of one another. For more information on binding methods, see page A-7. The following settings are applied for this layout: • Duplex • Bleeds • Printer's Marks (fold marks, trim marks, and job label) • Scale to Fit • Binding Perfect - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 189
BB-3 Templates The 2-Up Perfect layout should be used with jobs that have multiples of four pages, but it can be used with jobs that have any number of pages. Additional blank pages will be added if necessary. Pages will be ordered in groups of four so that when folded each sheet has four - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 190
are folded together, one inside the other. For more information on binding methods, see page A-7. The following settings are applied for this layout: • Duplex • Bleeds • Printer's Marks (fold marks, trim marks, and job label) • Scale to Fit • Binding Saddle - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 191
BB-5 Templates The 2-Up Saddle layout should be used with jobs that have multiples of four pages, but it can be used with jobs that have any number of pages. Additional blank pages will be added if necessary. Pages will be ordered so that when sheets are folded and stitched together, the pages will - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 192
Brochure layout consists of a single sheet folded into three sections. Although the three sections are the same width, the space between each section varies so that the leftmost panel can be folded over the other two panels. The following settings are applied for this layout: • Duplex • Printer - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 193
can be used only with jobs that have six pages. If the job contains more or less than six pages, an error message appears. The pages will be ordered as follows: 361 245 Sheet 1, front side Sheet 1, back side The 3-Up Trifold Brochure is usually folded as shown in the following illustration. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 194
Up Gate Fold layout is used most often in the case of a four-panel brochure. The finished brochure unfolds to double, then four times the original size. The following settings are applied for this layout: • Duplex • Printer's Marks (fold marks, trim marks and job label only) • Scale to Fit • Gang Up - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 195
4-Up Gate Fold layout can be used only with jobs that have eight pages. If the job contains more or less than eight pages, an error message appears. The pages will be ordered as follows: 3812 4567 Sheet 1, front side Sheet 1, back side The 4-Up Gate Fold is usually folded as - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 196
is used to create booklets from a layout of four pages on each side of the printed sheet. By rotating the two topmost pages, the signature can be folded both horizontally and applied for this layout: • Duplex • Bleeds • Printer's Marks (fold marks, trim marks, and job label) • Scale to Fit • - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 197
BB-11 Templates The 4-Up Head to Head layout should be used with jobs that have multiples of eight pages, but it can be used with jobs that have any number of pages. Additional blank pages will be added if necessary. Pages will be ordered so that when sheets are folded with two folds at 90 degrees, - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 198
top of one another without stressing the folded spine. The most common example is a road map. The following settings are applied for this layout: • Duplex • Printer's Marks (fold marks, trim marks and job label only) • Scale to Fit • Gang Up Unique - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 199
Templates The 4-Up Z-Fold layout is used only for jobs that have eight pages. If the job contains more or less than eight pages, an error message appears. The pages will be ordered as follows: 2345 6781 Sheet 1, front side Sheet 1, back side The 4-Up Z-Fold is usually folded as shown - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 200
- Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 201
to this chapter, contact your authorized service/support center. Error messages Error messages can result from problems with the job, the Fiery X3e, Command WorkStation, Command WorkStation LE, Fiery Spooler, or the copier/printer. When an error interferes with printing, you will see a message in - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 202
section. If you are unable to resolve the problem, make a note of the error condition and contact your authorized service/support center. Command WorkStation or Command WorkStation LE does not respond If the Command WorkStation or Command WorkStation LE windows do not update, log off and then quit - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 203
light red job row. Double-click anywhere in the row to see the error message. There are font errors. If user-specified fonts that are not resident on the Fiery X3e are not printing correctly in PostScript files that are downloaded by users, request that they embed the fonts in the PostScript file or - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 204
or enter new settings in IPX (Novell) Setup to reflect the new configuration. If users cannot connect to the Fiery X3e with Fiery Downloader from a Windows client computer, you may need to reconfigure the utility's connection to the server. For details, see the User Software Installation Guide. - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 205
copier/printer has warmed up. Make a copy. If you can make a copy, restart the Fiery X3e, and when you see Idle on the status line of the Fiery X3e display, try printing a Test Page again. If the Test Page still fails to print, contact your authorized service/support center. Setup error messages - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 206
-6 Troubleshooting AutoCal error messages AutoCal™ error messages can result from problems during the AutoCal procedure. If you encounter one of the errors listed in the following table, correct the condition associated with the error, and then retry the AutoCal procedure. Fiery X3e message Error - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 207
window job ticket information 3-9 monitoring jobs 3-7 overview 2-4 printing job list 2-27 Activity monitor All Servers view 2-8 overview 2-8 Selected Server view 2-9 activity states, defined 2-10 Administrator password 14, A-7 bleeds printer's marks A-5 setting 6-10 C Cancel Printing command 7-5 from - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 208
2-3 windows 2-3 communicating print requirements 1-5 Configuration page 2-26 context-sensitive menus 2-21 Control Panel map 2-26 copiers/printers and duplex printing A-3 Create Master option 3-24 to 3-25 creep, see binder's creep custom template limitations 6-24 D date 6-8 Define Marks dialog box - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 209
printing enabling 6-15, 6-16 Repeat option 6-16 suggested uses 6-15 Unique option 6-16 Unique-Collate Cut option 6-17 Gang Up Repeat A-9 Gang Up Unique A-10 Go To Surface dialog box Template Path preference 2-28 imposition window clipping indicator 6-12 controls 6-3 Finishing settings 6-14 Fixed - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 210
to a file 3-31 panel 2-7, 3-30 printing 2-26, 3-31 using 7-18 viewing printed jobs 7-4 Job menu commands 7-4 job name 6-8 Job Properties dialog box 3-25 Job status indicators 2-10 job ticket customizing 3-9 defined 1-7 sorting by 3-8 Jobs window job ticket information 3-9 overview 2-5 L layout bleeds - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 211
Bleeds 6-10 Columns 6-7 Printer's Marks 6-7 rows Server window logging in 2-22 M Manage Fonts command 2-32 margins 6-24, A-5 measurement, setting units of password 3-5, 7-1 operator-controlled environment, setting up 1-2 orientation, setting 6-5 Override Print Settings command 7-6 overriding print - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 212
A-5 job label 6-8, A-5 job name 6-8 margins A-5 overview A-5 properties 6-9 sheet information 6-8 time 6-8 Trim Marks 6-8, A-5 printer's spread 5-5 printing Active Jobs list 2-27 archive log 2-27 Color Charts 2-26 Configuration page 2-26 Control Panel map 2-26 defined xv Email Log 2-26 error 7-10 - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 213
Job Log 2-26 queues list 2-27 test page 2-26 printing duplex 6-5, A-3 problems, see troubleshooting Process and Hold command 1-5, 3-14 Process Next command 7-6 creep 6-5 defined A-7 groups A-7 gutters 6-23 Save As dialog box 5-13 Save Template icon 6-25 Scale settings 6-11 Alignment and Offsets - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 214
from Command WorkStation LE 3-4 logging out from Command WorkStation 3-6 logging out from Command WorkStation LE 3-6 managing multiple servers 3-20 monitoring 2-12 printing information pages 2-24 RAM requirements 3-2 selecting 2-12 working with more than one 3-20 server fonts, see fonts sheet defined - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 215
troubleshooting Command WorkStation hangs C-2 Command WorkStation LE hangs C-2 general guidelines C-2 slow redraw 5-8 unexpected printing results C-3 users are unable to connect to the printer C-4 U Undo command 4-6, 7-16 undo, in editing thumbnail views 4-11, 7-17 Units preference 2-28, 2-29 units - Kyocera KM-C2230 | Fiery X3e 22C-KM Job Managment Guide for KM-C2230 - Page 216
JOB MANAGEMENT GUIDE
Fiery X3e 31C-M Color Server