Kyocera TASKalfa 3050ci 3050ci/3550ci/4550ci/5550ci Operation Guide Rev-2.2011 - Page 188

Copying Functions Poster Original Copy To use this device to make copies larger than the maximum paper size, use Poster mode to separate and copy an enlarged image onto multiple pages. The completed copies have overlapping areas. A single large page can be created by pasting those areas together. Choose one of the following 3 enlargement settings: • Copy size - The output paper size is chosen from the following sizes. Copy is enlarged according to the selected paper size. Model Type Inch models Metric models Paper size 34 × 44", 22 × 34", 17 × 22" A0, A1, A2 • Zoom prioirty - Specify the output zoom size from 100 to 400%. Image will be output on the necessary number of copies for the specified zoom size. • Number of sheets - Select number of sheets to split the image from 2, 4, or 8 sheets. Copy is enlarged according to the selected number. NOTE: The available original sizes are A3, A4-R, Ledger and Letter-R. The available paper sizes are A3 and Ledger only. Follow the steps shown below to use poster enlargement. 1 Press the Copy key. 2 Place the originals on the platen. 3 Press [Layout/Edit] and then press [Poster]. 4 Select an enlargement method. Copies Poster Off Copy Size Original Zoom Paper : A4 : 100% : A4 Preview Status Add Shortcut Zoom Priority Number of Sheets Separate and copy an image suitable for the selected copy size. A0 A1 Cancel A2 OK 10/10/2010 10:10 If [Copy Size] is selected, set the output paper size. If [Zoom Priority] is selected, set the output zoom size. If [Number of Sheets] is selected, set the number of split pages. 5 Press [OK]. 6 Press the Start key. Copying begins. 4-28