Kyocera TASKalfa 3050ci 3050ci/3550ci/4550ci/5550ci Operation Guide Rev-2.2011 - Page 280

Document Box Repeat Copy Repeat Copy Job Retention To maintain free space on the hard disk, you can set the maximum number of stored jobs. Use the procedure below to specify the maximum number of stored jobs. 1 Press the System Menu key. 2 Press [Document Box/Removable Memory], [Next] of Job Box, [Change] of Repeat Copy Job Retention. Document Box/Removable Memory - Repeat Copy Job Retention Set the maximum number of repeat copy jobs to retain. Use [-]/[+] or the numeric keys to enter a number. *Set this number to 0 to not retain any jobs. 3 Use the [+] and [-] keys or the numeric keys to enter the maximum number of stored jobs. You can enter any number between 0 and 50. (0 - 50) 32 job(s) NOTE: If you enter a value of 0 (zero), no jobs are stored. Cancel OK 4 Press [OK]. The maximum number of stored jobs is set. Status 10/10/2010 10:10 Printing a Document You can print the documents stored in the Repeat Copy box. Use the procedure below to print a document. 1 Press the Document Box key. 2 Press [Job Box]. 3 Select [Repeat Copy] box, and press [Open]. 4 Select the document to print and press [Print]. Repeat Copy Name 2008101000101002 Date and Time 10/10/2010 10:10 Size 21 MB 001/001 Detail Print Delete Status Close 10/10/2010 10:10 5 If the document is protected by a password, enter the password using the numeric keys. 6 Press [Start Print] to start printing. The Repeat Copy box job will be deleted when the main power switch is turned off. 7-18