Kyocera TASKalfa 3050ci 3050ci/3550ci/4550ci/5550ci Operation Guide Rev-2.2011 - Page 338

Default Setting (System Menu) Sending Jobs Configure stamp settings for sending documents. After configuring the setting, return to the Sending Functions or Document Box (Sending Documents) screen from the system menu, and press the Reset key. Text Stamp Select whether or not a text stamp is used. Use the procedure below to set a Text Stamp. 1 Press the System Menu key. 2 Press [Common Settings] > [ ] > [Next] in System Stamp > [Next] in Sending Jobs > [Change] in Text Stamp. 3 Select [Off] or [On]. 4 Press [OK]. NOTE: When [On] is selected, the Text Stamp settings cannot be changed when sending. Edit Text Stamp Set the default text stamp. Use the procedure below to Edit a Text Stamp. 1 Press the System Menu key. 2 Press [Common Settings] > [ ] > [Next] in System Stamp > [Next] in Sending Jobs > [Change] in Edit Text Stamp. 3 Press [Keyboard] and enter a maximum of 32 characters for the text string, or select the text stamp to be printed from the displayed templates. 4 Press [Position] and set the position of the printed text stamp. Positions that can be selected are [Top Left], [Top Middle], [Top Right], [Middle Left], [Center], [Middle Right], [Bottom Left], [Bottom Middle], and [Bottom Right]. 5 Press [Font] and set font and display settings for the printed text stamp. The following settings can be selected. Size Style Font Item Color Density Display Pattern 6 Press [OK]. Description Set the font size of the printed text stamp. Set the font style of the printed text stamp. [Bold] or [Italic] can be set. Set the font of the printed text stamp. [Courier] or [Letter Gothic] can be set. Set the color of the printed text stamp. [Black], [Cyan], [Magenta], [Yellow], [Red], [Green], or [Blue] can be set. Set the density of the color of the printed text stamp. Set the display method of the printed text stamp. [Transparent], [Clipping], or [Overwrite] can be selected. 9-34