Kyocera TASKalfa 3050ci 3050ci/3550ci/4550ci/5550ci Operation Guide Rev-2.2011 - Page 348
Send, Quick Setup Registration, Dest. Check before Send, System Menu, Start
View all Kyocera TASKalfa 3050ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
Default Setting (System Menu) Send The sending settings allow you to specify the following sending function options. • Quick Setup Registration ...9-44 • Dest. Check before Send ...9-44 • Color Type ...9-45 • Entry Check for New Dest. ...9-45 • Default Screen ...9-46 • Send and Forward ...9-46 NOTE: If user login administration is enabled, you can only change the settings by logging in with administrator privileges. Quick Setup Registration Select the sending functions to be registered for Quick Setup. Six keys of the Quick Setup screen are allocated to typical functions but can be changed as necessary. Six items in the following options are available. Original Size, 2-sided/Book Original, Sending Size, Original Orientation, File Format, Density, Original Image, Scan Resolution, FAX TX Resolution, Color Selection, Zoom, Continuous Scan, Background Density Adj. Use the procedure below to register the Quick Setup functions. 1 Press the System Menu key. 2 Press [Send] and [Next] of Quick Setup Registration. 3 Press [Change] of the function to be registered in Quick Setup. 4 Select a key (1-6) allocated on the Quick Setup Registration screen. Press [Off] to delete a key from the Quick Setup. 5 Press [OK]. If you overwrite the setting, a confirmation screen appears. Press [Yes]. Dest. Check before Send When performing sending jobs, display the confirmation screen of destinations after pressing the Start key. The table below shows the available settings. Item Off On Description Do not display the confirmation screen of destinations. Display the confirmation screen of destinations. NOTE: Refer to Confirmation Screen of Destinations on page 3-29 for the Quick Setup steps. Use the procedure below to set the destination check before send. 1 Press the System Menu key. 2 Press [Send] and then [Change] of Dest. Check before Send. 3 Select [Off] or [On]. 4 Press [OK]. 9-44