Kyocera TASKalfa 420i 420i/520i Operation Guide - Page 142
Press [Layout/Edit] and then [Booklet
View all Kyocera TASKalfa 420i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Copying Functions The procedure for using Booklet copying is explained below. 1 Press the Copy key. Ready to copy. Booklet Off Place original. Original Zoom Paper : --- : 100% : --- Preview 1-sided >>Booklet 2-sided >>Booklet Book >>Booklet Status Add Shortcut Original Finishing Binding Left/Right Binding Top Binding Left Binding Right Binding Top Cancel Copies Off Cover Off Saddle Stitch Top Edge Top Original Orientation OK 08/08/2009 10:10 2 Place the originals on the platen. 3 Press [Layout/Edit] and then [Booklet]. 4 Press [1-sided>>Booklet] to produce a booklet from single-sided originals. Press [2-sided>>Booklet] to produce a booklet from two-sided originals. Press [Book>>Booklet] to produce a booklet from an open book original. 5 If you selected [2-sided>>Booklet] or [Book>>Booklet], choose the binding orientation in Finishing. If you selected [1-sided>>Booklet], choose the binding orientation in Finishing. 6 If you choose [1-sided>>Booklet], [2-sided>>Booklet], or [Book>>Booklet] you can add the cover. Press [Cover], select [Cover] and press [OK]. 7 Press [Original Orientation] to choose orientation of the originals, either [Top Edge Top] or [Top Edge Left]. Then press [OK]. 8 If the optional 3,000 sheet document finisher and folding unit are installed, the [Saddle Stitch] option is displayed. To use saddle stitching, press [Saddle Stitch] and then press [Bind and Fold]. You can saddle stitch up to 16 sheets (64 pages). 9 Press [OK]. 10 Platen and press the Start key. Copying begins. NOTE: When using the platen, be sure to place the originals in page order. 4-20 If the originals are placed on the platen, consecutively replace each original after pressing the Start key. After scanning all originals, press [Finish Scan] to start copying. OPERATION GUIDE