Kyocera TASKalfa 420i 420i/520i Operation Guide - Page 246

Default Setting (System Menu) Paper Output Select output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The options are as follows. Output Tray Descriptions Top Tray Tray A, Tray B*, Tray C* Delivery on Top Tray of the machine. Delivery to trays A to C in the optional 3,000 sheet document finisher. Finisher Tray* Job Separator Delivery on Tray set to the optional built-in finisher or document finisher. Delivery on the optional job separator. Tray 1 to 7* Delivery to trays 1 to 7 in the optional mailbox (tray 1 is the top tray). * Select [Face Up] (print surface up) or [Face Down] (print surface down) for paper orientation at output. NOTE: The optional job separator, built-in finisher, document finisher, or 3,000 sheet document finisher are required. FAX RX data output can be specified when the optional fax kit is installed. Use the procedure below to select the output tray. 1 Press the System Menu key. 2 Press [Common Settings] and then [Next] of Paper Output. 3 Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2. NOTE: FAX Port 1 appears when the optional fax kit is installed. If you have 2 optional fax kits installed, Fax Port 2 appears. You can specify the output tray for the second kit (Dual FAX). 4 Select Output Tray. For [Finisher Tray], [Tray B], [Tray C] or [Tray 1] to [Tray 7], select [Face Up] (print surface up) or [Face Down] (print surface down) as the paper orientation at output. 5 Press [OK]. 6 When changing the output tray of Copy/Custom Box, move to the copy or document box screen and press the Reset key. 8-14 OPERATION GUIDE