Kyocera TASKalfa 420i 420i/520i Operation Guide - Page 281
Auto Sleep, Auto Error Clear, Sleep Timer, Auto Error Clear ON/OFF, Error Clear Timer
View all Kyocera TASKalfa 420i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
Default Setting (System Menu) 3 Press [+] or [-] to enter the time until Auto Panel Reset is turned on. You cannot use the numeric keys to enter this value. 4 Press [OK]. Auto Sleep If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to Sleep and Auto Sleep on page 2-9 for Sleep. Sleep Timer Set the amount of time to wait before Auto Sleep. Options are between 1 and 240 minutes (every one minute). Use the procedure below to set the Auto Sleep time. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Change] of Sleep Timer. 3 Press [+] and [-] or the numeric keys to enter the time until Auto Sleep is turned on. 4 Press [OK]. 8 Auto Error Clear If an error occurs during printing, the print job stops to wait for the next step to be taken by the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time elapses. The following errors are automatically cleared. Print overrun Memory is full Auto Error Clear ON/OFF Select whether to use Auto Error Clear or not. Use the procedure below to specify the auto error clear setting. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Change] of Auto Error Clear. 3 Press [Off] or [On]. 4 Press [OK]. Error Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options are between 5 and 495 seconds (every five seconds). NOTE: If you select [Off] for Auto Error Clear, the time display does not appear. OPERATION GUIDE 8-49