Kyocera TASKalfa 420i 420i/520i Operation Guide - Page 299
NetWare Setup
View all Kyocera TASKalfa 420i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 299 highlights
Default Setting (System Menu) Item Description Default Setting Restarting the System* HTTPS Select whether or not to communicate On Y using HTTPS. SSL must be set to [On] in SSL Setup on page 8-69. IPP Select whether or not to communicate Off Y using IPP. When selecting [On], set the IPP default Port Number. Use the IPP Port:631 default port 631. IPP over SSL Select whether or not to use IPP over Off Y SSL. SSL must be set to [On] in SSL Setup on page 8-69. Raw Port Select whether or not to receive On Y documents using Raw Port. * Y: The machine must be restarted after the setting is changed. N: The machine does not need to be restarted after the setting is changed. Use the procedure below. 8 The following procedure is an example for specifying the SMTP (E-mail TX) settings. 1 Press the System Menu key. 2 Press [System] and then [Next] of Network to display the network settings screen. 3 Display the item you want to set and press [Change] for that item. In this example, press [Change] of SMTP (E-mail TX). 4 Press [On] or [Off]. 5 Press [OK]. 6 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-63. NetWare Setup Select the NetWare network connection. After that, select frame types for NetWare network from Auto, Ethernet-II, 802.3, 802.2, or SNAP. The default settings are "On, Frame Type: Auto". Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Change] of NetWare. 3 Press [On]. 4 Press the key for the frame type you want to use. OPERATION GUIDE 8-67