Kyocera TASKalfa 420i 420i/520i Operation Guide - Page 59

A B Preparation before Use NOTE: Paper sizes are indicated on the cassettes. To change between inch size and metric size (A, B sizes), follow the steps below to adjust the size switch. 1. Holding the paper width adjusting tab, move the 2 paper width guide to a position other than that of the paper. 2. Turn the size switch A 90°. > 3. Move the size lever B up (C) or down (I). C:metric size (centimeters) (A, B sizes) I:inch size 4. Turn the size switch 90°to lock it. > 4 Align the paper flush against the left side of the cassette. OPERATION GUIDE IMPORTANT: • Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause paper jams. • Ensure that the loaded paper does not exceed the level indicator (see illustration below). • When loading the paper, keep the side that was closest the package seal facing up. • The paper length and width guides must be adjusted to the paper size. Loading the paper without adjusting these guides may cause skewed feeding and paper jams. • Be sure that the paper length and width guides rest securely against the paper. If there is a gap, readjust the guides to fit the paper. 2-21