Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 110

Basic Operation Duplex Original Zoom Paper : A4 : 100% : A4 Preview 1-sided >>1-sided 1-sided >>2-sided 2-sided >>1-sided 2-sided >>2-sided Book >>1-sided Book >>2-sided Status Add Shortcut Original Binding Left/Right Binding Top Cancel Copies Top Edge on Top Original Orientation OK 10/10/2010 10:10 6 If you choose [2-sided>>1-sided], [2-sided>>2-sided], [Book>>1-sided] or [Book>>2-sided], select the binding edge of the originals of Original. 7 Press [Original Orientation] to select orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then press [OK]. 8 Press [OK]. 9 Press the Start key. Once an original placed on the platen is scanned, replace it with the next one. Then, press the Start key. After scanning all originals, press [Finish Scan] to start copying. Collate/Offset The machine can collate and offset at the same time as it copies. You can use the Collate/Offset copy function for tasks such as those shown below. Collate 3 2 1 3 2 1 3 2 1 3 2 1 Scan multiple originals and deliver complete sets of copies as required according to page number. Original Copy Offset Without Document Finisher 3 2 1 3 2 1 3 2 1 3 2 1 Original Copy (each set) If the optional document finisher is not installed, when you use offsetting, printed copies are produced after rotating each set (or page) by 90º. NOTE: To use sorting, the same size of paper as the selected paper tray must be loaded in a different orientation in a different paper tray. The paper sizes supported in Offset are A4, B5, Letter and 16K. 3-14