Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 122

Basic Operation Data to be entered are as follows. NOTE: You will be unable to send the data if you forget your login user name or login password. Contact your administrator and check your login user name or login password. For send to folder (SMB) Item Data to be entered Max. characters Host Name* Path Login User Name Login Password Host name or IP address of the PC to receive the data. Up to 64 characters Path to the receiving folder such as follows. For example, User\ScanData. Up to 128 characters User name to access the PC For example, abcdnet\james.smith Up to 64 characters Password to access the PC Up to 64 characters * To specify a port number different from the default (139), enter using the format "host name: port number" (e.g., SMBhostname:140). To enter the IPv6 address, enclose the address in brackets [ ]. (e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140) For send to folder (FTP) Item Data to be entered Max. characters Host Name* Path Login User Name Login Password Host name or IP address of FTP server Up to 64 characters Path to the receiving folder. For example, User\ScanData. Otherwise the data will be saved in the home directory. Up to 128 characters FTP server login user name Up to 64 characters FTP server login password Up to 64 characters * To specify a port number different from the default (21), enter using the format "host name: port number" (e.g., FTPhostname:140). To enter the IPv6 address, enclose the address in brackets [ ]. (e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140) Enter Destination. Folder Path Entry SMB Host Name FTP Path Login User Name Login Password Add to Addr Book Status Search SMB Host Next Dest. Windows Network Cancel Destination Connection Test OK 10/10/2010 10:10 6 Upon completion of all entries, press [Connection Test] to check the connection. NOTE: Connected. appears when connection to the destination is correctly established. If Cannot connect. appears, review the entry. To specify another destination, go to step 7. To specify only one destination, go to step 8. 3-26