Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 166

Copying Functions Selecting How to Copy Originals Select whether you wish to create individual copies on different size paper matching the original sizes or to produce all copies on the same size paper. NOTE: This function is available regardless of whether originals have the same width or not. The table below shows the finished document sizes for the different original size options. Option Mixed Size Copies Same Size Copies Description Originals are detected individually for size and copied to the same size paper as originals. Originals are all copied to the same size paper. Use the procedure below to copy mixed size originals. 1 Press the Copy key. 2 Place originals on the document processor. Copies Mixed Size Originals Off Original Zoom Paper : A4 : 100% : A4 Preview Status Add Shortcut Mixed Size Copies Same Size Copies Original Width Same Width Top Page Direction Different Width Long Edge Left Short Edge Left Cancel OK 10/10/2010 10:10 IMPORTANT: When placing originals of different width, arrange the originals so that their left sides and top sides are aligned, and place the originals in alignment with the far width guide. If the originals are not aligned in this way, they may not be scanned correctly, and skewing or original jams may result. 3 Press [Org./Paper/Finishing] and then [Mixed Size Originals]. 4 Select [Mixed Size Copies] or [Same Size Copies] as finish size. 5 Select the combination of originals from [Same Width] and [Different Width]. When [Same Size Copies] is selected, select [Long Edge Left] or [Short Edge Left] as the first original orientation. 6 Press [OK]. 7 Press the Start key to start copying. 4-8