Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 250

Sending Functions Use the procedure below to specify the Bates Stamp settings. 1 Press the Send key. 2 Place the originals on the platen. 3 Press [Advanced Setup] and then press [Bates Stamp]. Copies Bates Stamp Off On Stamp [Date] Date Numbering User Name Text 1 Serial Number Text 2 Delete Text 1 Change Text 2 Each Print Page Numbering Default Top Left Position Status Add Shortcut Change 9 pt Black Font Cancel Date Format Top Edge on Top Original Orientation OK 10/10/2010 10:10 4 Press [On]. 5 Press [Date], [User Name], [Serial Number], [Numbering], [Text 1], or [Text 2], and set additional information to be displayed with the stamp. If you selected [Text 1] or [Text 2], press [Change] below it and enter the text string to be displayed. If you selected [Date], press [Date Format] and select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/ MM/DD] to set the date format. If you selected [Numbering], press [Numbering Default] and set the starting sequence number (1 to 9999999). 6 Press [Position] and select the position of the text stamp. 7 Press [Font] and select font and display settings for the text stamp. 8 Press [Original Orientation] to choose the orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then press [OK]. 9 Press [OK]. 10 Specify the destination, and press the Start key to start sending. 6-40