Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 298

Default Setting (System Menu) Sound Set options for buzzer sound during the machine operations. The table below lists the buzzer types and their settings and details. Item Value Description Volume Key Confirmation Job Finish Ready Warning 0 (Mute), 1 (Minimum) to 5 (Maximum) Off, On Off, On, FAX Reception Only* Off, On Off, On Set the buzzer volume level. Emit a sound when the control panel and touch panel keys are pressed. Emit a sound when a print job is normally completed. Emit a sound when the warm-up is completed. Emit a sound when errors occur. USB Keyboard Off, On Emit a sound when a USB keyboard is operated. * This is displayed when the optional fax kit is installed. Use the procedure below to set the sound options. 1 Press the System Menu key. 2 Press [Common Settings], [Next] of Sound and then [Next] of Buzzer. 3 Press [Change] of Volume, Key Confirmation, Job Finish, Ready, Warning, or USB Keyboard. 4 Select the buzzer volume level, or other sound options. Original/Paper Settings Register additional types and sizes of originals and paper. Custom Original Size Set up frequently-used custom original sizes. The custom size options are displayed on the screen to select original size. The dimensions available are as follows. The table below lists the sizes that can be registered. Input units Inch models Metric models Dimensions X: 2.00 to 17.00" (in 0.01" increments) Y: 2.00 to 11.69" (in 0.01" increments) X: 50 to 432 mm (in 1 mm increments) Y: 50 to 297 mm (in 1 mm increments) 9-4