Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 303

Default Setting (System Menu) For Custom 1-8, settings for duplex printing and media type name can be changed. Duplex Name Item Prohibit Permit Description Duplex printing not allowed. Duplex printing allowed. Change names for Custom 1-8. Names should be not more than 15 characters. Selecting media type at multi purpose tray, the name after change will be displayed. Use the procedure below to set the paper weight. 1 Press the System Menu key. 2 Press [Common Settings], [Next] of Original / Paper Settings and then [Next] of Media Type Setting. 3 Press [Next] for the media type whose weight you want to change. 4 Press [Change] of Paper Weight. 5 Select the weight and press [OK]. The previous screen reappears. 6 Press [Close]. 7 To change the duplex printing settings for Custom 1 (-8), press [Next] of Custom 1(-8) and then [Change] 9 of Duplex. Select [Prohibit] or [Permit] and press [OK]. The previous screen reappears. 8 Press [Close]. 9 To change the name for Custom 1(-8), press [Next] of Custom 1(-8) and then [Change] of Name. Enter the name and press [OK]. NOTE: Refer to the Character Entry Method on page Appendix-9 for details on entering characters. Default Paper Source Select the default paper source from Cassette 1-5 and Multi Purpose Tray. NOTE: [Cassette 3] to [Cassette 5] are displayed when the following options are installed. [Cassette 3]: When a paper feeder (500-sheet x 2) or large capacity paper feeder (1500-sheet x 2) is installed [Cassette 4]: When a paper feeder (500-sheet x 2) or large capacity paper feeder (1,500-sheet x 2) is installed [Cassette 5]: When a side feeder (3,000-sheet) is installed 9-9