Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 316

Default Setting (System Menu) Border Erase to Back Page Select the Border Erase Method for Back Page of a sheet. The table below shows the available settings. Item Same as Front Page Do Not Erase Description Border Erase performed in the same setting as the front page No Border Erase performed on the back page NOTE: Refer to page 4-18 and page 6-26 for Border Erase. Use the procedure below to specify the border erase setting for the back side of the original page. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Border Erase to Back Page. 3 Press [Same as Front Page] or [Do Not Erase]. 4 Press [OK]. Margin Default Set the default margin. The table below shows the measurement ranges that can be set. Input units Inch Metric Range -0.75 to 0.75" (in 0.01" increments) -18 mm to 18 mm (in 1 mm increments) Use the procedure below to set the default margin width. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Margin Default. 3 Use the [+] or [-] to enter the margin widths for Left/Right and Top/Bottom. You can use the numeric keys to enter the number directly. 4 Press [OK]. Auto Image Rotation Select the default Auto Image Rotation setting. The table below shows the available settings. Item Off On Description No Auto Image Rotation performed. Auto Image Rotation performed. 9-22