Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 317
System Menu, Reset, EcoPrint, Toner SaveLevelEcoPrint, IMPORTANT, Description
View all Kyocera TASKalfa 4500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 317 highlights
Default Setting (System Menu) NOTE: Refer to page 4-38 for Auto Image Rotation. Use the procedure below to set the default Auto Image Rotation settings. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Auto Image Rotation. 3 Select the default for [Off] or [On]. 4 Press [OK]. EcoPrint Select the EcoPrint default. The table below shows the available settings. Item Off On No EcoPrint performed. EcoPrint performed. Description NOTE: Refer to page 4-14 for EcoPrint. Use the procedure below to set the default EcoPrint setting. 1 Press the System Menu key. 9 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] twice, and then [Change] of EcoPrint. 3 Select [Off] or [On] for the default. 4 Press [OK]. Toner SaveLevel(EcoPrint) Select the default Toner SaveLevel(EcoPrint). One of five levels [1] - [5] can be set. NOTE: Raising the level reduces toner consumption, but image quality falls. IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press the Reset key. Use the procedure below to select the default Toner SaveLevel(EcoPrint). 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] twice, and then [Change] of Toner SaveLevel(EcoPrint). 3 Select from [1] to [5] for the default Toner SaveLevel(EcoPrint). 4 Press [OK]. 9-23