Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 322
Repeat Copy, DP Read Action, Description, Default Setting System Menu, for Repeat Copy.
View all Kyocera TASKalfa 4500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
Default Setting (System Menu) Repeat Copy Select the Repeat Copy default. The options are as follows. The table below shows the available settings. Item Off On Description No Repeat Copy is performed. Repeat Copy is performed. NOTE: This setting is not displayed when the optional Data Security Kit is installed or the Repeat Copy job is set to 0. Refer to page 4-43 for Repeat Copy. Use the procedure below to set the default Repeat Copy setting. 1 Press the System Menu key. 2 Press [Common Settings], [ ] and [Next] of Function Defaults. Press [ ] three times and [Change] of Repeat Copy. 3 Select the default for [Off] or [On]. 4 Press [OK]. DP Read Action Set the operation when a document is scanned from the document processor. The table below shows the available settings. Item Speed Priority Quality Priority Description Priority given to scanning speed. Priority given to image quality. NOTE: The optional document processor is required. Cannot be used when set to [On] in Document Guard on page 9-103. Use the procedure below to set a DP Read Action. 1 Press the System Menu key. 2 Press [Common Settings], [ ] and [Next] of Function Defaults. Press [ ] three times and [Change] of DP Read Action. 3 Select [Speed Priority] or [Quality Priority]. 4 Press [OK]. 9-28