Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 368
Low Power Timer, Auto Sleep, Panel Reset Timer
View all Kyocera TASKalfa 4500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 368 highlights
Default Setting (System Menu) Panel Reset Timer If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset. Options are between 5 and 495 seconds (every five seconds). NOTE: If you select [Off] for Auto Panel Reset, the time display does not appear. Use the procedure below to set the reset time. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Change] of Panel Reset Timer. 3 Press [+] or [-] to enter the time until Auto Panel Reset is turned on. You cannot use the numeric keys to enter this value. 4 Press [OK]. Low Power Timer You can specify the amount of time to wait before Auto Low Power Mode. Specify a value from 1 - 240 minutes (1 minute increments). For more information on Low Power Mode, refer to the Low Power Mode and Auto Low Power Mode on page 2-9. Use the procedure below to set the Low Power Mode. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Low Power Timer]. 3 Press [+],[-] or the numeric keys to enter the time until Low Power Mode is turned on. 4 Press [OK]. Auto Sleep If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to Sleep and Auto Sleep on page 2-10 for Sleep. Auto Sleep Select whether to use Auto Sleep or not. NOTE: Time remaining before Auto Sleep can be modified as necessary. Use the procedure below to specify the auto sleep setting. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Change] of Auto Sleep. 3 Press [Off] or [On]. 4 Press [OK]. 9-74