Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 393

Default Setting (System Menu) LDAP Security Select the type of encryption according to the type of security employed by the LDAP server. This setup is available when SSL is On. The default setting is Off. NOTE: LDAP must be set to [On] in Protocol Detail on page 9-94. The table below shows the available settings. Item Off SSL/TLS STARTTLS Description Do not use security employed by the LDAP server. Use implicit mode for data communication. The server provides services using the SSL/TLS port (636). Encryption is applied to any data communication using this port. Use explicit mode for data communication. Select this if the server supports the start TLS command. This uses the same port (389) as LDAP. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network, [Next] of Secure Protocol, and then [Change] of LDAP Security. 3 Press [Off], [SSL/TLS] or [STARTTLS]. 9 4 Press [OK]. SMTP Security Set the protocol that can be used on the SMTP port. This setup is available when SSL is On. The default setting is Off. NOTE: SMTP must be set to On in Protocol Detail on page 9-94. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network, [Next] of Secure Protocol, and then [Change] of SMTP Security. 3 Press [Off], [SSL/TLS] or [STARTTLS]. 4 Press [OK]. 9-99