Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 470
Manual Staple, Staple is empty.
View all Kyocera TASKalfa 4500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 470 highlights
Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Removable memory - is full.* This job is canceled. Press [End]. - Insufficient free space in the removable memory. Delete unneeded files. Replace all originals - and press [Continue]. Remove originals from the document processor, put them back in their original order, and place them again. Press [Continue] to resume printing. Press [Cancel] to cancel the job. 2-45 Remove originals in the document processor. Are there any originals left in Remove originals from the document - the document processor? processor. Scanner memory is - full.* Scanning cannot be performed due to - insufficient memory of the scanner. Follow the instructions on the touch panel. Send error.* - An error has occurred during transmission. The job is canceled. Press [End]. Refer to Responding to Send Error for the error code and corrective actions. 12-17 Staple is empty.* Has the document finisher run out of staples? If the staples are depleted, the - machine will stop and the location of staple depletion will be indicated on the touch panel. Leave the machine on and follow the instructions to replace the staple case. Press [Continue] to print without stapling. Press [Cancel] to cancel the job. Staple is empty. (Manual Staple) Has staple cartridge holder Add staples to staple cartridge holder 11-10 A run out of staples? A. Staple jam. - If a staple jam occurs, the machine - will stop and the location of the jam will be indicated on the touch panel. Leave the machine on and follow the instructions to remove the jammed staple. System error. - System error has occurred. Follow - the instructions on the touch panel. * When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. 12-14