Kyocera TASKalfa 4500i Kyocera Command Center RX User Guide Rev-1.2
Kyocera TASKalfa 4500i Manual
View all Kyocera TASKalfa 4500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera TASKalfa 4500i manual content summary:
- Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 1
- Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 2
depending on your printing system. Examples of the operations given in this guide support the Windows 7 printing environment. Essentially the same operations are used for Microsoft Windows Vista, Windows XP, Windows Server 2003, and Windows Server 2008 environments. © 2011 KYOCERA MITA Corporation - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 3
Table of Contents Chapter 1 Introduction System Requirements ...1-1 Protocols ...1-1 Web Browser ...1-1 Accessing the Embedded Server 1-1 Chapter 2 The Embedded Server Home Page Login ...2-1 Top Bar ...2-1 Navigation Menu ...2-2 Status Displays ...2-3 Chapter 3 About Login Levels of Login - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 4
> FAX Restrictions > Reject Number List 6-26 FAX / i-FAX > FAX > Encryption Key 6-26 FAX / i-FAX > i-FAX > Defaults 6-26 FAX / i-FAX > i-FAX > SMTP 6-26 FAX / i-FAX > i-FAX > POP3 6-27 FAX / i-FAX > i- Advanced > Protocols > NetBEUI 6-35 Advanced > E-mail > SMTP > General 6-35 ii User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 5
6-46 Advanced > Security > IEEE802.1x 6-47 Advanced > Security > IPSec > General 6-47 Advanced > Security > IPSec > Rule1 (to Rule3 6-48 Advanced > Link > HyPAS Device Online 6-49 Chapter 7 Troubleshooting Troubleshooting ...7-1 COMMAND CENTER RX iii - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 6
toner usages monitors jobs, later (Safari operates on Apple Mac OS X 10.4 or later.) Password. This is set up internally. For successive logins use any login name or password set up later in the embedded server. Refer to Advanced > Management > Authentication > General on page 6-42. 1-1 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 7
COMMAND CENTER RX 1-2 - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 8
administrator password allows the user to access all pages, including Document Box, Address Book, and Settings on the navigation menu. To access the embedded server pages, the users can be identified by choosing one of network authentication, local authentication, and job accounting authentication - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 9
entire machine, such as Device Defaults, Basic Networking as well as model, optional equipment installed, firmware, network parameters, FAX parameters, and information on the supported browsers. Job Status This page includes information on all device jobs including job status for printing, scanning - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 10
downloads. Download Drivers and Software For downloading printer drivers and software: http://www.kyoceramita.com/download/ About Kyocera Mita and the current supply by paper source. Toner Shows the toner supply by color. The status of the waste toner box is also given. Optional Equipment Status - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 11
be turned on. The default user name and password, or the local administrator account when User Login is Job Account ID In the case where the device is configured for job accounting but not for User Login, a user can be authenticated by his/her job account ID. Enter the job account ID in Account - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 12
About Login For access using a job account ID, My Information, Device Information, Job Status, Document Box, Address Book, and Links are displayed in the navigation menu. 3-2 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 13
accessible when you have logged in using a general user or administrator account. It allows you to add or delete a document box, as if the device is equipped with a FAX kit. The users with a general user account can delete the documents which were created and added in their own document boxes. - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 14
, move, copy, join, download, E-mail or print documents in Number or Box Name. If the box is password-protected, enter the password to proceed. The documents contained in the custom to in Destination. If the box is passwordprotected, enter the password. 4 Click Move. The document is moved to the box. - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 15
the copied document in Destination. If the box is password-protected, enter the password. 4 Click Copy. The document is copied into the list if you want to change the color of the document after downloading. For example, you can download a color document as a monochrome document when it is stored - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 16
as a monochrome document. 5 Name the document in File Name. 6 Enter the date of sending and job ID in Additional Information. These entries are appended in the file name. 7 Use the File Format drop- 6 In Functions, change settings for Duplex, EcoPrint, Toner Save Level as desired. 4-4 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 17
FAX Box Document Box 7 Click Print. The document is printed. Deleting a Custom Box 1 Click Custom Box under Document Box on the navigation menu. The Custom Boxes page opens. Click All Boxes to show all custom boxes present in the device, and click My Boxes to show only the custom boxes of your own. - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 18
Box Name. If the box is password-protected, enter the password to proceed. The documents contained in document simultaneously. 4 Select either of Delete, Download, and Print to apply to the document. show only the custom boxes created under your account. 2 Click Delete once. This will not Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 19
Document Box 2 Click Box Property. The Polling Box - Property opens to select whether the document which was sent is deleted, or overwritten and retained. 3 To configure the box so that documents are overwritten at updating, set Overwrite Setting to On. To configure the box so that documents are - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 20
for the contact. Specify Host Name, Port Number, Path to the shared folder, Login User Name, and Login Password for the contact. If the FAX system is installed or i-FAX is activated in the system, you can include these settings. 4 Modify the settings for SMB and FTP accesses as desired. User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 21
Groups Address Book 5 Click Submit. To cancel, click Back. Deleting a Contact 1 Click Address Book in the navigation menu. The Addresses page appears. 2 Select the contact(s) you want to delete by selecting the checkbox to the left. If you want all contacts displayed on the page deleted, click - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 22
All. To deselect all, click None. Note: Deleting a group does not delete the contacts joined in the group. 3 Click Delete. To cancel, click Back. 5-3 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 23
and Copy Count. For details, see page 611. Scanner Page This page includes settings that apply to the scanning function of the device, such as Default Scan Resolution and Original Placement. For details, see page 6-13. FAX/i-FAX Page This page includes settings that apply to the FAX function of the - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 24
firmware information, etc. Device Settings This shows whether the administrator password is defined, the language the embedded server is displayed in, and the status of Auto Sleep, A4-Letter override, and Auto Error , refer to Advanced Page on page 6-29. Network > IP Filters 6-2 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 25
Settings Pages This displays the list of IP addresses and subnet masks (IPv4) or prefix length (IPv6) that have access permission as set under IP Filters (IPv4) and IP Filters (IPv6) on the Advanced page. If no IP addresses have been designated, then access permission will be granted to all - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 26
page provides information about user account. User Login This shows as Device Defaults, Security, and basic Networking. Basic > Defaults > Network the machine. Refer to Basic > Defaults > Reset on page 6-6. Host print system is connecting. If you have manually assigned an IP address that starts with - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 27
the IP addresses and server information are obtained via DHCPv6 based on the settings of the automatic configuration made under RA (router setting). Basic > Defaults > Time If a time server is used to synchronize the time as well, the current time can be adjusted regularly and easily. Enter the host - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 28
factory default values default When clicking the Reset button, the machine returns to the factory default > Defaults > Device Defaults This page downloaded languages. You can optionally download Error Clear Turns Auto Error Clear, which automatically clear errors when they occur, on or off. Error Clear - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 29
Skip Error Job is activated from 5 to 90 seconds. MP Tray Empty With the MP tray set as the default paper Unusable Time Setting is On. Unlock Code Entering this code, comprised of four digits from 0 entry of a password for confirmation is required when adding a new destination. Default Screen (Send - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 30
the Address Book and Box, use of the Stop key, and cancellation of jobs are forbidden. When it is set to Partial Lock, use of the System are User and Administrator. One administrator account is registered by default. Local Authorization turns On or Off Job Authorization settings for a user listed on - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 31
> Reset on page 6-6. Device Certificate - Self Issued The self-issued certificate is automatically issued by default. The automatically issued certificate has the country code, common name, and a validity period of about 10 years already configured. Self Certificate Displays whether the certificate - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 32
display the download dialog for the file. Click Save to download the exported certificate. If the printing system supports self-issued a file and click Open. When the certificate is password-protected, enter the password and click Submit. The certificate is imported. Delete 6-10 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 33
selection dialog box. Select a file and click Open. Enter the password and click Submit. The certificate is imported. Delete Certificate Click Delete. machine, such as default print resolution or copy count. Default printer settings will be overridden by the printer driver settings. Settings that - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 34
default setting is Off. Available for some color machines which support toner consumption for saving the printing costs. The default setting is Off. Available for some machines. Toner Save Level Selects Toner the received print data to the specified code and prints that data. Filter Switches Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 35
provides a summary of the items displayed on the Scanner > Default page. Color Selection (Copy) This selects color mode for copying. Auto automatically identifies full color or black and white from the original document to copy. You can manually select either Full Color or Black & White to forcedly - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 36
the original document to scan. You can manually select Full Color, Grayscale, or Black PDF/A Turns PDF/A-compliant format PDF/A-1a or PDF/A-1b on or Off, when File Format above is PDF. PDF/A is an electronic document file format for longterm preservation as addressed in the ISO 19005-1 specification - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 37
number in the field provided, or use the SMB default port 139. Scanner > E-mail The E-mail page name of the printer, serial number, MAC address, host name and IP address activate Send and Forward. Forward settings Allows to edit the job to send and forward. Color Selection This selects color mode - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 38
can manually select PDF/A Turns PDF/A-compliant format PDF/A-1a or PDF/A-1b on or off, when File Format above is PDF. PDF/A is an electronic document file format for longterm preservation as addressed in the ISO 19005-1 specification password to open the document, but they must type the password to - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 39
, Port Number, path to a shared folder, Login User Name, and the Login Password. • FTP - forwards FTP scan jobs to an accessible FTP server. Enter the Host Name, Port Number, path to a folder, Login User Name, and the Login Password. Adding an Address from an Address Book To add an address from an - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 40
Defaults The table below provides a summary of the items displayed on the FAX / i-FAX > Common page. Local FAX Name Specifies your FAX system name. Furigana (Japan only) This adds phonetic scripts to the FAX system name. Account . 2 in1 Receive Enables or disables 2 in1 reception. 6-18 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 41
, and forward faxes from outside of your business area to the business office nearest to the sender's fax number. For models that do not support RX/Forward Requirements, the documents received are forwarded in the same requirement. Types of RX/Forward Requirements Open the FAX/i-FAX > Common > RX - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 42
during a particular period of hours or All Day not to specify the hours. Enable Time When Time Specification is selected in the previous item, specify the start time and end time. File Name Specify the file both items and set the processes. Print Prints received documents on paper. • Name User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 43
name. • Status Displays whether the condition is currently used. • Forwarding Turn On to enable forwarding. • File Format Selects the format of forwarded files from PDF, TIFF, or XPS. (This item has effect when the forwarding destination is E-mail, SMB, or FTP.) • FTP Encrypted TX Turn On to enable - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 44
RX/Forward Requirements page. Select ALL and click Submit. This completes the settings for applying the same forwarding process without using a Requirement list. 6-22 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 45
. FTP Saves faxes on an accessible FTP server. Specify Host Name, Port Number, Path to the folder, Login User Name, and Login Password. FAX Forwards faxes to other FAX machines. Specify FAX Number, Transmit Start Speed, and other necessary information on the forwarding destinations. i-FAX Forwards - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 46
i-FAX > FAX > Defaults page. Local FAX Number (Port 1/ 2) Specifies your FAX system number. FAX Line Sets the type of phone line to correspond to the type of telephone service that you are using. FAX/TEL, TAD or DRD) or Manual. (The selectable option is different depending on the destination.) User - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 47
Settings Pages DRD Pattern Selects the DRD pattern. This menu is available only for specific destinations. Remote Switching Dial Number Specifies the remote switching dial number. You can specify it within a range of 00 to 99. Remote switching allows you - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 48
displayed on the Defaults page. i-FAX Enables or disables i-FAX. Set to On to enable. FAX / i-FAX > i-FAX > SMTP The section below provides a summary of the items displayed on the SMTP page. SMTP Port Number Set the SMTP Port Number or use the SMTP default port 25. SMTP Server Name 6-26 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 49
for Authenticate as, the account name set here will be used for SMTP authentication. Login Password Enter the login password. POP before SMTP Timeout check for incoming e-mails at specific interval. Specify the interval in the range from 3 minutes to 60 minutes. The default is 15 minutes. Run once - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 50
address. POP3 Port Number Enter the POP3 port number or use the default port number 110. POP3 Server Timeout Enter the timeout in seconds during . Login User Name Enter the login name of the user. Login Password Enter the password for connecting to the user name above. Use APOP Enables (On) Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 51
after you have completed these settings in order to properly register the content of those settings in the machine. Refer to Basic > Defaults > Reset on page 6-6. Advanced > Network Protocol Quick Summary/Secure Protocol Quick Summary A quick summary of the protocols that appear in the Advanced - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 52
mask. • Default Gateway Specifies the IP address of the default gateway. • Services for Windows". With this tool installed on the Windows PC, a Bonjour-enabled printer can be installed using the "Bonjour Printer Wizard." To allow printing from the Mac OS X system, the printer needs to support Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 53
function will require the presence of an RA Stateless router in the network that the device is connected to. • Default Gateway Specifies the IPv6 address of the default gateway. • DHCPv6 (Stateful) Specifies whether or not to obtain IPv6 IP addresses by automatic configuration. When RA is turned - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 54
and/or replacing a character strings (commands) at the beginning or end of job data. Up to four logical printers can be set. Each logical printer can IPPS, SMB (NetBEUI), or RAW. If no port is specified during print, the default port used will be Logical Printer 1 (LP1), port 9100. TCP/IP Port Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 55
End of Job String Specifies the character string sent to the printer after output, directly to the output port (lp port). This character string is used when it is necessary to transmit a control code after the print data is sent. Advanced > Protocols > NetWare This printing system supports both NDS - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 56
jobs using the ThinPrint technology within a network. For the implementation, the system uses a ThinPrint port. The default supported in Mac OS version 10.6. The printing system network component supports Mac OS of various versions (Web Browser on page 1-1) and is compatible with LaserWriter driver - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 57
> SMTP > General Device event reports and counter status such as Low Toner and other information can be sent automatically via E-mail to the specified E- Number Set the SMTP Port Number, or use the SMTP default port 25. Choose the default port number 465 for SMTP connections over SSL. SMTP Server - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 58
Other is selected for Authenticate as, the account name set here will be used for SMTP authentication. Login Password When Other is selected for Authenticate as, the password set here will be used for authentication information set on this machine and displayed in the subject lilne. 6-36 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 59
= Model • %serial = Serial Number • %etheraddr = MAC Address • %host = Host Name • %ip = IP Address Event Report Items Select the events you want to be reported. These events are: • Add Paper • Low Toner • Add Toner • Cover Open • Paper Jam • All Other Errors Event Report Interval Enter the E-mail - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 60
allows you to set the POP3 user account and information on the POP3 server. the POP3 default port number 110. Choose the default port number Password is sent using plain ASCII text. When APOP = On, the Login Password is encrypted, and cannot be read. APOP requires that the POP3 server supports Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 61
system automatically generates a trap, an error message sent to predetermined trap recipients. The community names are used like passwords. SNMPv1/v2c Sets whether to use community name for SNMP requests to write (change) a value. The default name is 'public'. After you have changed the setting, you - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 62
trap to be generated from Add Paper, Low Toner, Add Toner, Cover Open, Paper Jam, and All Other Errors. Advanced > Management > SNMP > SNMPv3 The only user. Password Enter the password for the read-only user. User Name Enter the name of the read/write user. Password Enter the password the read/ Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 63
default port 389. Search Timeout Specifies a period of time for searching the LDAP server. Login User Name Specifies the user name. Login Password Specifies the password Select this if the server supports the startTLS command. This uses communication. The server provides services using the LDAP over - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 64
Settings Pages Return Value • LDAP Attribute Enter the LDAP attribute to return. • Job Type Select job type from E-mail, FAX, and i-FAX. Optional Return Value • Display Name Enter the name of to 10 domain names. You can select one of these domains at login. Select the Default radio 6-42 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 65
established, you can add a group to specify the Group Information and items for Job Authorization Settings. LDAP must be enabled in order to activate group authorization. Up to 20 group accounts are registerable. By default, a group account (Other) has been preset. This is used to process any group - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 66
the IC card to use. System Code, Service Code, Number of User Blocks to Use These items are used when FeliCa is selected in IC Card Read Type. Each item must be given a specific parameter for the FeliCa IC card than one recipient then the addresses should be separated by a semicolon ";". User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 67
will be converted into a pre-defined string to display the above information. • %printer = Model • %serial = Serial Number • %etheraddr = MAC Address SSFC Job Log Subject Defines the Job Log Notification information reports only when you log in by using a SSFC-format IC card. You can include the - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 68
Settings Pages Set the number of job logs for sending, from 1 to 1500. Run once in the following to take effect, restart the machine as described in Basic > Defaults > Reset on page 6-6. SSL Specifies whether or not to use the SSL protocol cannot be accessed by the TWAIN driver. 6-46 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 69
.1x client certificate of this user must be valid. Login Password You can set a PEAP-based password. (This setting is valid when PEAP [EAP-MS-CHAPv2] the IPSec protocol. Select Off to disable it. Restriction Specifies the default policy for non-IPSec packets. Select Allow to allow communication with - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 70
hash algorithm and encryption algorithm below. AH protects the integrity of the packet contents using encryption checksum. Select the hash algorithm below. • Hash 6-48 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 71
Settings Pages Selects the hash algorithm. • Encryption Selects the encryption algorithm. (When ESP is selected under Protocol.) • PFS When PFS is set to On (enabled), even if a key is decrypted, the decrypted key cannot be used to decrypt the other keys generated after the decryption. This improves - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 72
Settings Pages Allows to import, delete, or view Server Certificate and Client Certificate. About Displays the list of web browsers supported by the embedded server. 6-50 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 73
solutions for problems you may encounter with the embedded server. Troubleshooting Symptom I can support operation using the embedded server? Corrective Action Reference Turn the power on to this machine, wait until it is a ready state, and try to access the embedded server. Operation Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 74
> Defaults > password. Contact your dealer or service center. Error or Warning is Is there an error message displayed under the shown in the display? STATUS indicator. Perform the troubleshooting procedure the messages suggests referring to the Operation Guide. Operation Guide 7-2 User Guide - Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 75
- Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 76
- Kyocera TASKalfa 4500i | Kyocera Command Center RX User Guide Rev-1.2 - Page 77
Rev. 1.2 2011.3