Kyocera TASKalfa 520i 420i/520i Operation Guide - Page 131

Copying Functions Selecting How to Copy Originals Select whether you wish to create individual copies on different size paper matching the original sizes or to produce all copies on the same size paper. NOTE: This function is available regardless of whether originals have the same width or not. The table below shows the finished document sizes for the different original size options. Option Description 4 Mixed Size Copies Same Size Copies Originals are detected individually for size and copied to the same size paper as originals. Originals are all copied to the same size paper. Use the procedure below to copy mixed size originals. 1 Press the Copy key. 2 Place originals on the document processor. Ready to copy. Mixed Size Originals Off Place original. Original Zoom Paper : --: 100% : --- Preview Status Add Shortcut Mixed Size Copies Same Size Copies Copies Original Width Same Width Top Page Direction Different Width Long Edge Left Short Edge Left Cancel OK 08/08/2009 10:10 IMPORTANT: When placing originals of different widths, be sure to flush them against the document width guide toward the back of the machine. 3 Press [Org./Paper/Finishing] and then [Mixed Size Originals]. 4 Select [Mixed Size Copies] or [Same Size Copies] as finish size. 5 Select the combination of originals from [Same Width] and [Different Width]. When [Same Size Copies] is selected, select [Long Edge Left] or [Short Edge Left] as the first original orientation. 6 Press [OK]. 7 Press the Start key to start copying. OPERATION GUIDE 4-9